Solved Exercises on Solving Patterns in Grade 4

Master pattern solving: number sequences, geometric patterns, arithmetic sequences, pattern rules, and pattern completion through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Arithmetic Sequence Pattern
Exercise 1
Find the next 3 numbers in the sequence:
7, 12, 17, 22, __, __, __
Definition:

Arithmetic sequence: A sequence where each term increases by the same amount (common difference)

Pattern finding method:
  1. Find the difference between consecutive terms
  2. Identify the pattern rule
  3. Apply the rule to find missing terms
Sequence
7, 12, 17, 22, ?, ?, ?
Rule
Add 5
Next terms
27, 32, 37
Step 1: Find the common difference

12 - 7 = 5, 17 - 12 = 5, 22 - 17 = 5

The common difference is 5

Step 2: Identify the pattern rule

Add 5 to get the next number in the sequence

Pattern rule: Start at 7, add 5 each time

Step 3: Apply the rule to find next terms

22 + 5 = 27

27 + 5 = 32

32 + 5 = 37

Step 4: Verify the pattern

7 → 12 → 17 → 22 → 27 → 32 → 37

Each number increases by 5 ✓

7, 12, 17, 22, 27, 32, 37
Final answer:

The next 3 numbers are: 27, 32, 37

Applied rules:

• Arithmetic sequence: Each term differs by a constant value

• Difference calculation: Subtract consecutive terms to find the pattern

• Pattern continuation: Apply the rule consistently

2 Geometric Pattern
Exercise 2
Find the next shape in the pattern:
🟦, 🔵, 🔴, 🟦, 🔵, 🔴, __
Definition:

Geometric pattern: A repeating sequence of shapes, colors, or symbols

Pattern
🟦, 🔵, 🔴, 🟦, 🔵, 🔴, ?
Rule
Repeat every 3
Next shape
🟦
Step 1: Identify the repeating unit

Look at the sequence: 🟦, 🔵, 🔴, 🟦, 🔵, 🔴

The pattern repeats every 3 shapes: 🟦, 🔵, 🔴

Step 2: Determine the pattern rule

Square (🟦), Circle (🔵), Triangle (🔴) repeats

After 🔴 comes 🟦 again

Step 3: Apply the rule

Since the last shape is 🔴, the next shape follows the cycle

After 🔴 comes 🟦

Step 4: Verify the pattern

🟦, 🔵, 🔴, 🟦, 🔵, 🔴, 🟦

Pattern continues correctly ✓

🟦, 🔵, 🔴, 🟦, 🔵, 🔴, 🟦
Final answer:

The next shape is: 🟦 (Square)

Applied rules:

• Repeating pattern: Identify the smallest repeating unit

• Cycle recognition: Count how many elements make up one cycle

• Continuation: Continue the established cycle

3 Multiplication Pattern
Exercise 3
Complete the sequence:
3, 9, 27, 81, __, __
Definition:

Multiplication pattern: Each term is multiplied by the same number to get the next term

Sequence
3, 9, 27, 81, ?, ?
Rule
Multiply by 3
Next terms
243, 729
Step 1: Find the multiplication factor

9 ÷ 3 = 3

27 ÷ 9 = 3

81 ÷ 27 = 3

Each term is multiplied by 3

Step 2: Identify the pattern rule

Multiply each term by 3 to get the next term

Pattern rule: Start at 3, multiply by 3 each time

Step 3: Apply the rule to find next terms

81 × 3 = 243

243 × 3 = 729

Step 4: Verify the pattern

3 → 9 → 27 → 81 → 243 → 729

Each term is 3 times the previous term ✓

3, 9, 27, 81, 243, 729
Final answer:

The next 2 numbers are: 243, 729

Applied rules:

• Multiplication pattern: Each term is multiplied by a constant factor

• Factor identification: Divide consecutive terms to find the multiplier

• Consistency: Apply the same operation throughout

Rules and methods, laws,...
\(a_n = a_1 + (n-1)d\)
Arithmetic Sequence Formula
Arithmetic Pattern
Add Constant
7, 12, 17, 22, ... (add 5)
Geometric Pattern
Multiply by Constant
3, 9, 27, 81, ... (×3)
Repeating Pattern
Cycle of Shapes
🟦, 🔵, 🔴, 🟦, 🔵, 🔴, ...
Key definitions:

Pattern: A regular, repeated sequence following a specific rule

Arithmetic sequence: Numbers increasing by a constant difference

Geometric sequence: Numbers multiplied by a constant factor

Complete methodology:
  1. Observe the sequence: Look at the first few terms carefully
  2. Find the relationship: Check if adding, subtracting, multiplying, or dividing gives the next term
  3. Test the rule: Apply the rule to multiple pairs to confirm
  4. Apply the rule: Use the rule to find missing terms
  5. Verify: Check that the completed pattern makes sense
Tip 1: Always check at least 2 or 3 consecutive pairs to confirm the pattern rule.
Tip 2: For number patterns, try addition/subtraction first, then multiplication/division.
Tip 3: For shape patterns, count how many elements make up one complete cycle.
Tip 4: Write down the operations you notice to visualize the pattern rule.
Common errors: Misidentifying the pattern rule, applying inconsistent operations, skipping verification steps.
Pattern recognition: Practice with various sequence types, pay attention to small differences, verify results.
Formulas to know by heart:

• Arithmetic sequence: \(a_n = a_1 + (n-1)d\) where d is the common difference

• Geometric sequence: \(a_n = a_1 \times r^{n-1}\) where r is the common ratio

• Repeating pattern: Identify the cycle length and apply modulo operation

• Pattern verification: Always check that your rule works for multiple consecutive terms

Solution: Exercises 4 to 5
4 Mixed Pattern Problem
Exercise 4
Find the 7th term in the sequence:
4, 8, 16, 32, 64, __, __
Definition:

Geometric sequence: Each term is multiplied by the same number (common ratio)

Sequence
4, 8, 16, 32, 64, ?, ?
Rule
Multiply by 2
7th term
256
Step 1: Find the common ratio

8 ÷ 4 = 2

16 ÷ 8 = 2

32 ÷ 16 = 2

64 ÷ 32 = 2

The common ratio is 2

Step 2: Identify the pattern rule

Multiply each term by 2 to get the next term

Pattern rule: Start at 4, multiply by 2 each time

Step 3: Find the missing terms

5th term: 64

6th term: 64 × 2 = 128

7th term: 128 × 2 = 256

Step 4: Verify the pattern

4 → 8 → 16 → 32 → 64 → 128 → 256

Each term is 2 times the previous term ✓

4th term: 8, 5th term: 16, 6th term: 32, 7th term: 64, 8th term: 128, 9th term: 256
Final answer:

The 7th term is: 128

Applied rules:

• Geometric sequence: Each term is multiplied by the same constant

• Ratio identification: Divide consecutive terms to find the common ratio

• Term calculation: Continue applying the rule to find specific terms

5 Complex Pattern Problem
Exercise 5
Find the missing number:
1, 4, 9, 16, __, 36, 49
Definition:

Square number pattern: Each term is a perfect square (n²)

Sequence
1, 4, 9, 16, ?, 36, 49
Rule
n²
Missing term
25
Step 1: Analyze the given numbers

1 = 1²

4 = 2²

9 = 3²

16 = 4²

36 = 6²

49 = 7²

Step 2: Identify the pattern rule

The sequence shows consecutive perfect squares

Pattern rule: n² where n starts at 1 and increases by 1 each time

Step 3: Find the missing term

Position 1: 1² = 1

Position 2: 2² = 4

Position 3: 3² = 9

Position 4: 4² = 16

Position 5: 5² = 25

Position 6: 6² = 36

Position 7: 7² = 49

Step 4: Verify the pattern

1 → 4 → 9 → 16 → 25 → 36 → 49

Which is: 1² → 2² → 3² → 4² → 5² → 6² → 7² ✓

1², 2², 3², 4², 5², 6², 7² = 1, 4, 9, 16, 25, 36, 49
Final answer:

The missing number is: 25

Applied rules:

• Square number pattern: Recognize perfect squares

• Position analysis: Consider the position of each term

• Verification: Ensure the identified rule works for all known terms

Key Concepts: Patterns, Sequences, and Problem-Solving Strategies
\(a_n = a_1 + (n-1)d\)
Arithmetic Sequence Formula
Key definitions:

Pattern: A predictable sequence following a specific rule

Arithmetic sequence: Numbers with a constant difference between consecutive terms

Geometric sequence: Numbers with a constant ratio between consecutive terms

Perfect square: A number that can be expressed as n² where n is a whole number

Complete methodology:
  1. Observe: Carefully examine the given sequence
  2. Compare: Look for relationships between consecutive terms
  3. Test: Apply potential rules to multiple pairs
  4. Confirm: Verify the rule works consistently
  5. Apply: Use the rule to find missing terms
  6. Validate: Check the final answer fits the pattern
Tip 1: For number patterns, first try addition/subtraction (arithmetic), then multiplication/division (geometric).
Tip 2: When dealing with perfect squares, consider if terms are 1², 2², 3², etc.
Tip 3: For geometric patterns, divide consecutive terms to find the common ratio.
Tip 4: Always verify your pattern rule with at least two consecutive pairs.

Tip 5: Write out the pattern rule explicitly to avoid mistakes.
Common errors: Identifying the wrong pattern type, miscalculating differences/ratios, not verifying the pattern.
Pattern recognition: Practice with various sequence types, pay attention to small differences, verify results.
Problem-solving strategies: Work systematically, check your work, consider multiple approaches.
Formulas to know by heart:

• Arithmetic sequence: \(a_n = a_1 + (n-1)d\) where d is the common difference

• Geometric sequence: \(a_n = a_1 \times r^{n-1}\) where r is the common ratio

• Perfect squares: 1²=1, 2²=4, 3²=9, 4²=16, 5²=25, 6²=36, 7²=49, 8²=64, 9²=81, 10²=100

• Repeating pattern: Use division with remainder to find position in cycle

Questions & Answers

Question: I have trouble knowing when to add vs multiply in pattern problems. How can I tell the difference?

Answer: Great question! Here's how to distinguish between addition and multiplication patterns:

  • Addition patterns (arithmetic): Look for a constant difference between consecutive terms. Example: 3, 7, 11, 15... (difference is 4)
  • Multiplication patterns (geometric): Look for a constant ratio between consecutive terms. Example: 2, 6, 18, 54... (ratio is 3)

To determine which pattern you have:

  1. Calculate the difference: next - previous (for addition patterns)
  2. Calculate the ratio: next ÷ previous (for multiplication patterns)
  3. If differences are the same, it's addition. If ratios are the same, it's multiplication.

Example: For sequence 4, 8, 12, 16...

  • Differences: 8-4=4, 12-8=4, 16-12=4 (same difference = addition pattern)
  • Ratios: 8÷4=2, 12÷8=1.5, 16÷12≈1.33 (different ratios = not multiplication pattern)

Question: How do I solve patterns with shapes instead of numbers? I don't understand the rules.

Answer: Shape patterns follow the same principles as number patterns! Here's how to approach them:

  1. Identify the cycle: Look for the smallest repeating group of shapes
  2. Count the cycle length: How many shapes make up one complete repetition?
  3. Continue the pattern: Repeat the same sequence of shapes

Example: Triangle, Circle, Square, Triangle, Circle, Square...

  • The cycle is: Triangle, Circle, Square (length = 3)
  • After Square comes Triangle again
  • Pattern continues: Triangle, Circle, Square, Triangle, Circle, Square, Triangle...

Tip: Draw the pattern if needed, or write the shapes in order to visualize the repeating unit!

Question: What should I do when a pattern has two different rules mixed together? I got confused on a problem like 2, 4, 8, 10, 20, 22...

Answer: Some complex patterns have alternating rules! Let's analyze your example: 2, 4, 8, 10, 20, 22...

Looking closely:

  • 2 → 4: Added 2
  • 4 → 8: Multiplied by 2
  • 8 → 10: Added 2
  • 10 → 20: Multiplied by 2
  • 20 → 22: Added 2

The pattern alternates: "Add 2, then Multiply by 2"

The next terms would be: 22 × 2 = 44, then 44 + 2 = 46

When facing complex patterns:

  1. Check if it's arithmetic or geometric first
  2. If not, look for alternating rules
  3. Consider if odd/even positions follow different rules
  4. Write out the operations to see the pattern clearly
Complete Summary: Solving Patterns
Key Definitions:

Pattern: A regular, repeated sequence that follows a specific rule. Patterns help us predict what comes next.

Sequence: An ordered list of numbers, shapes, or objects that follow a pattern.

Arithmetic Sequence: A sequence where each term increases or decreases by the same amount (the common difference).

Geometric Sequence: A sequence where each term is multiplied by the same number (the common ratio).

Perfect Square: A number that can be expressed as n² where n is a whole number (like 1, 4, 9, 16, 25...).

Core Rules and Principles:

• Consistency: The same rule must apply to every pair of consecutive terms.

• Verification: Always check that your pattern rule works for multiple pairs.

• Recognition: Look for arithmetic (add/subtract) before geometric (multiply/divide).

• Repetition: In shape patterns, identify the smallest repeating unit.

Step-by-Step Method:
  1. Observe: Carefully look at the first few terms in the sequence.
  2. Compare: Find the relationship between consecutive terms.
  3. Test: Apply your suspected rule to multiple pairs to confirm.
  4. Apply: Use the confirmed rule to find missing terms.
  5. Verify: Check that your answer fits the pattern.
Simple Examples

Arithmetic: 2, 5, 8, 11... (add 3 each time)

Geometric: 3, 6, 12, 24... (multiply by 2 each time)

Shape Pattern: △, ○, □, △, ○, □... (cycle of 3 shapes)

Advanced Examples

Alternating: 5, 10, 12, 24, 26... (×2, then +2, repeat)

Perfect Squares: 1, 4, 9, 16, 25... (1², 2², 3², 4², 5²)

Fibonacci-like: 1, 1, 2, 3, 5, 8... (add previous two numbers)

Tips: Always check at least 2 consecutive pairs to confirm your pattern rule. Write out the operations to visualize the pattern.
Common Pitfalls: Don't assume the first pair you see represents the pattern. Always verify with multiple pairs.
Memorization Tips: Remember perfect squares up to 10² = 100. For geometric patterns, divide consecutive terms to find the ratio.
Key Takeaways:

• Patterns always follow a consistent rule that applies to every term.

• Arithmetic patterns involve addition or subtraction of a constant.

• Geometric patterns involve multiplication or division by a constant.

• Shape patterns repeat in cycles - identify the shortest repeating unit.

• Always verify your answer by applying the rule to check if it makes sense.