Worksheet: Comparing Decimal Numbers to Hundredths in Grade 4

Master comparing decimal numbers to hundredths with 5 comprehensive worksheet exercises. Includes step-by-step solutions and detailed explanations.

Worksheet Solutions: Exercises 1 to 3
1 Comparing decimals to hundredths
Exercise 1
Compare: 3.75 and 3.57
Definition:

Decimal Comparison to Hundredths: Compare digits in each place value from left to right until a difference is found

Comparison method:
  1. Compare digits in the same place value positions
  2. Start from the leftmost digit (highest place value)
  3. Stop when a difference is found
  4. Use comparison symbols: >, <, or =
Numbers
3.75 and 3.57
Comparison
3.75
>
3.57
Step 1: Compare units place

Both numbers have 3 in the units place, so move to tenths

3.75
3.57
Units: 3 = 3
Step 2: Compare tenths place

7 > 5, so 3.75 > 3.57

3.75
3.57
Tenths: 7 > 5
3.75 > 3.57
Final answer:

3.75 > 3.57

Applied rules:

• Left-to-Right Comparison: Always start from the highest place value

• First Difference: Stop at the first place value where digits differ

• Place Value: Each column represents different place values

Tip 1: Always compare from left to right (highest place value first).
Tip 2: Equal digits in a place value mean you continue to the next place value.
2 Comparing decimals with zeros in hundredths place
Exercise 2
Compare: 4.80 and 4.8
Definition:

Equivalent Decimals to Hundredths: Adding zeros at the end of a decimal does not change its value

Numbers
4.80 and 4.8
Comparison
4.80
=
4.8
Step 1: Equalize decimal places

Add a zero to 4.8 to make it 4.80

4.80
4.80
Both numbers are identical
4.80 = 4.8
Final answer:

4.80 = 4.8

Applied rules:

• Zero Addition Principle: Adding zeros after the last non-zero digit does not change the value

• Place Value: Equal digits in all place values means the numbers are equal

• Equivalence: 4.80 and 4.8 represent the same amount

Tip 1: Adding zeros at the end doesn't change the decimal value.
Tip 2: Always equalize decimal places before comparing.
3 Comparing decimals with different whole numbers
Exercise 3
Compare: 5.67 and 4.98
Definition:

Different Whole Numbers: When whole numbers differ, the decimal with the larger whole number is greater

Numbers
5.67 and 4.98
Comparison
5.67
>
4.98
Step 1: Compare units place

5 > 4, so 5.67 > 4.98

Note: We don't need to compare tenths or hundredths since the whole numbers differ!

5.67
4.98
Units: 5 > 4
5.67 > 4.98
Final answer:

5.67 > 4.98

Applied rules:

• Whole Number Priority: Compare whole numbers first

• Early Stopping: If whole numbers differ, stop comparing

• Place Value: Whole numbers have higher value than decimals

Tip 1: Always compare whole numbers first - they matter most!
Tip 2: If whole numbers are equal, then compare decimals.
Worksheet Practice Problems
Additional Practice Problems
Problem A
2.45 ? 2.54
Problem B
6.7 ? 6.70
Problem C
3.08 ? 3.80
Problem D
7.34 ? 7.43
Problem E
4.6 ? 4.06
Problem F
8.92 ? 8.29
>
Greater Than
<
Less Than
=
Equal To
Decimal Place Value Chart to Hundredths
Tens
Units
.
Tenths
Hundredths
10
1
.
1/10
1/100
10
1
.
0.1
0.01
3.75 > 3.57
Decimal Comparison to Hundredths
Rule 1
Compare left to right
Start with highest place value
Rule 2
Stop at first difference
Don't continue beyond difference
Rule 3
Equal digits continue
Move to next place value
Key definitions:

Decimal Point: Separates whole numbers from fractional parts

Tenths: First digit after decimal point (1/10)

Hundredths: Second digit after decimal point (1/100)

Place Value: Value of a digit based on its position

Worksheet: A set of practice problems designed to reinforce learning and skills

Tip 1: Always compare from left to right (highest place value first).
Tip 2: Adding zeros at the end doesn't change the decimal value.
Tip 3: Remember: 10 hundredths = 1 tenth, 10 tenths = 1 unit.
Worksheet Solutions: Exercises 4 to 5
4 Comparing decimals with different decimal places
Exercise 4
Compare: 2.3 and 2.34
Definition:

Different Decimal Places: Add zeros to make all numbers have the same number of decimal places

Numbers
2.3 and 2.34
With Zeros
2.30 and 2.34
Comparison
2.30 < 2.34
Step 1: Equalize decimal places

Add a zero to 2.3 to make it 2.30

2.30
2.34
Step 2: Compare units place

Both numbers have 2 in the units place, so move to tenths

2.30
2.34
Units: 2 = 2
Step 3: Compare tenths place

Both numbers have 3 in the tenths place, so move to hundredths

2.30
2.34
Tenths: 3 = 3
Step 4: Compare hundredths place

0 < 4, so 2.30 < 2.34

2.30
2.34
Hundredths: 0 < 4
2.3 < 2.34
Final answer:

2.3 < 2.34

Applied rules:

• Decimal Alignment: Always align decimal points when adding/subtracting

• Equalizing Decimals: Add zeros to make all numbers have same decimal places

• Place Value: Each column represents hundredths, tenths, units, etc.

Tip 1: Adding zeros at the end doesn't change the decimal value.
Tip 2: Always equalize decimal places before comparing.
5 Complex comparison with zeros in middle
Exercise 5
Compare: 4.07 and 4.70
Definition:

Complex Comparison: When comparing decimals with zeros in different positions, pay attention to place value

Numbers
4.07 and 4.70
Comparison
4.07
<
4.70
Step 1: Compare units place

Both numbers have 4 in the units place, so move to tenths

4.07
4.70
Units: 4 = 4
Step 2: Compare tenths place

0 < 7, so 4.07 < 4.70

Note: The zero in the tenths place of 4.07 is significant!

4.07
4.70
Tenths: 0 < 7
4.07 < 4.70
Final answer:

4.07 < 4.70

Applied rules:

• Zero Significance: Zeros in place values are significant

• Place Value: Each position represents a specific value

• Left-to-Right: Always compare from highest to lowest place value

Tip 1: Zeros in the middle of decimals still hold place value.
Tip 2: Don't ignore zeros when comparing place values.

Comprehensive Summary: Comparing Decimal Numbers to Hundredths Place

Definitions of All Concepts Used

  • Decimal Number: A number that includes a decimal point, separating the whole number part from the fractional part (e.g., 3.75)
  • Decimal Point: The dot (.) that separates the whole number part from the fractional part in a decimal number
  • Tenths: The first digit after the decimal point, representing 1/10 of a unit (e.g., in 4.3, the 3 is in the tenths place)
  • Hundredths: The second digit after the decimal point, representing 1/100 of a unit (e.g., in 4.37, the 7 is in the hundredths place)
  • Place Value: The value of a digit based on its position in the number (units, tenths, hundredths, etc.)
  • Compare: To determine whether one number is greater than, less than, or equal to another number
  • Comparison Symbols: Symbols used to compare numbers: > (greater than), < (less than), = (equal to)
  • Equivalent Decimals: Decimals that represent the same value (e.g., 3.5 = 3.50)
  • Whole Number: The part of a decimal number to the left of the decimal point
  • Fractional Part: The part of a decimal number to the right of the decimal point
  • Align: To arrange numbers so that decimal points are in the same vertical column
  • Worksheet: A set of practice problems designed to reinforce learning and skills

Core Rules, Laws, and Principles

  • Left-to-Right Comparison Rule: Always start comparing from the leftmost digit (highest place value)
  • First Difference Principle: Stop comparing once you find the first place value where digits differ
  • Equal Digits Rule: When digits in a place value are equal, continue to the next place value
  • Place Value Principle: Each column represents a specific place value (tens, units, tenths, hundredths)
  • Zero Addition Principle: Adding zeros after the last non-zero digit in a decimal does not change its value (e.g., 3.5 = 3.50)
  • Value Relationships: 10 hundredths = 1 tenth, 10 tenths = 1 unit
  • Whole Number Priority: Compare whole numbers first before comparing decimals
  • Transitive Property: If a > b and b > c, then a > c
  • Reflexive Property: Any number is equal to itself (a = a)

Step-by-Step Methods and Procedures

Decimal Comparison Method:

  1. Ensure both numbers have the same number of decimal places (add zeros if needed)
  2. Compare digits in the same place value positions
  3. Start from the leftmost digit (highest place value)
  4. Compare whole numbers first (if different, stop here)
  5. Stop when a difference is found
  6. Use comparison symbols: >, <, or =
  7. Verify your answer by thinking about the actual values

Decimal Comparison Strategy:

  1. Look at the whole number part first
  2. If whole numbers are equal, compare tenths
  3. If tenths are equal, compare hundredths
  4. Continue to the right until you find a difference
  5. Remember: 10 hundredths = 1 tenth
  6. Use a number line to visualize if needed

Multiple Concrete Examples

Simple Examples:

  • 2.34 < 2.43 (compare tenths: 3 < 4)
  • 5.67 > 5.61 (compare hundredths: 7 > 1)
  • 3.50 = 3.5 (adding zeros doesn't change value)
  • 1.23 < 1.32 (compare tenths: 2 < 3)

Advanced Examples:

  • 4.56 > 4.50 (compare hundredths: 6 > 0)
  • 7.03 < 7.30 (compare tenths: 0 < 3)
  • 8.9 > 8.85 (compare tenths: 9 > 8)
  • 9.05 = 9.050 (equivalent decimals)

Tips, Tricks, and Common Pitfalls

Tips and Tricks:

  • Draw a vertical line under decimal points to ensure alignment
  • Use the rhyme: "Start from the left, find the first fight!"
  • Think of money when comparing decimals ($3.50 vs $3.25)
  • Add zeros to make all numbers have the same decimal places
  • Circle the first place value where digits differ
  • Use a number line to visualize the comparison if needed
  • Compare whole numbers first - they matter most!
  • Check your work by converting to fractions if needed

Common Pitfalls:

  • Comparing from right to left instead of left to right
  • Ignoring zeros in place values
  • Thinking that more digits means a larger number
  • Forgetting to equalize decimal places before comparing
  • Stopping too early before finding the first difference
  • Mixing up comparison symbols
  • Not considering that 3.5 = 3.50 = 3.500
  • Forgetting to compare whole numbers first

Key Notes and Takeaways for Memorization

  • Memory Aid: Remember: "Left to right, biggest sight!"
  • Verification: Always check your comparison by thinking about actual values
  • Pattern Recognition: Look for differences in higher place values first
  • Place Value Focus: Each column represents a specific fraction of a unit
  • Process Consistency: Always work from highest to lowest place value
  • Zero Addition: Adding zeros after the decimal point doesn't change the value
  • Self-Check Strategy: After comparing, verify that your answer makes sense
  • Comparison Rule: The first differing digit determines the relationship
  • Whole Number Priority: Compare whole numbers first, then decimals

Questions & Answers

Question: I always get confused when comparing decimals like 3.45 and 3.5. Should I compare from left to right or right to left?

Answer: Great question! Always compare from left to right, starting with the highest place value. Let's compare 3.45 and 3.5:

  • Units place: 3 = 3 (equal, continue)
  • Tenths place: 4 < 5, so 3.45 < 3.5

You don't need to look at the hundredths place because the tenths place already shows a difference. Remember: the first place value where digits differ tells you which number is larger!

3.45 < 3.5

Always start from the left (highest place value) and work your way to the right.

Question: Why is 5.70 the same as 5.7, but 5.07 is different from 5.7?

Answer: This is a common source of confusion! Let's break it down:

  • 5.70 vs 5.7: These are equivalent because adding zeros at the end doesn't change the value. Both represent 5 and 7 tenths.
  • 5.07 vs 5.7: These are different because of where the digits are placed!
    • 5.07 has 0 in the tenths place and 7 in the hundredths place
    • 5.7 has 7 in the tenths place (which is worth much more!)

Think of it like money: $5.07 is seven cents, while $5.70 is seventy cents!

5.70 = 5.7
5.07 < 5.7

The position of each digit matters greatly in place value!

Question: How do I compare decimals with different numbers of decimal places, like 2.3 and 2.34?

Answer: When comparing decimals with different numbers of decimal places, equalize them by adding zeros:

  1. Identify the number with the most decimal places (2.34 has 2 decimal places)
  2. Add zeros to the other number to match (2.3 becomes 2.30)
  3. Align decimal points and compare normally

Important: Adding zeros after the decimal point does NOT change the value!

2.30
+2.34
----
4.64

This method ensures that hundredths are compared to hundredths, tenths to tenths, etc. The mathematical principle is that 2.3 = 2.30, so we're not changing the value, just making the comparison easier.

Tip: Always count decimal places in your answer to verify it matches the pattern of the numbers you compared.