Unit Conversion: Changing a measurement from one unit to another while maintaining the same quantity
Conversion Factor: A number used to change one set of units to another by multiplying or dividing
Multiplication in Conversions: Used when converting to a smaller unit (more pieces needed)
Division in Conversions: Used when converting to a larger unit (fewer pieces needed)
- Identify the relationship between units
- Determine if the new unit is larger or smaller
- If converting to a smaller unit → Multiply by the conversion factor
- If converting to a larger unit → Divide by the conversion factor
- Perform the calculation carefully
Converting from feet to inches
1 foot = 12 inches
Feet is the larger unit, inches is the smaller unit
Going from larger unit (feet) to smaller unit (inches)
Rule: Multiply by the conversion factor
Operation: 15 feet × 12 inches/foot
15 feet × 12 inches/foot = 180 inches
Cost per foot: $4
Total feet: 15 feet
Total cost: 15 × $4 = $60
180 inches of wood, $60 total cost
• Small unit conversion: When converting to smaller units, multiply
• Large unit conversion: When converting to larger units, divide
• Relationship principle: Smaller units require more pieces to measure the same amount
Pound to Ounce: 1 pound = 16 ounces
Ton to Pound: 1 ton = 2,000 pounds
Division in Conversions: Used when finding how many smaller units fit in a larger amount
Truck capacity: 8,000 pounds
Box weight: 40 pounds each
Target unit: tons
Operation: Division (finding how many fit)
8,000 pounds ÷ 40 pounds/box = 200 boxes
Conversion: 1 ton = 2,000 pounds
Operation: Division (converting to larger unit)
8,000 pounds ÷ 2,000 pounds/ton = 4 tons
200 boxes, 4 tons capacity
• Division for fitting: To find how many smaller units fit in a larger amount
• Division for larger units: When converting to larger units, divide
• Proportional reasoning: Maintain the same quantity across unit changes
Gallon to Quart: 1 gallon = 4 quarts
Quart to Pint: 1 quart = 2 pints
Pint to Cup: 1 pint = 2 cups
Cup to Ounce: 1 cup = 8 ounces
Converting from gallons to quarts
1 gallon = 4 quarts
Gallons is the larger unit, quarts is the smaller unit
Operation: Multiplication (converting to smaller unit)
120 gallons × 4 quarts/gallon = 480 quarts
Pool capacity: 120 gallons
Filling rate: 10 gallons/hour
Operation: Division (time = total amount ÷ rate)
120 gallons ÷ 10 gallons/hour = 12 hours
480 quarts capacity, 12 hours to fill
• Multiplication for smaller units: Convert to smaller units by multiplying
• Division for rates: Time = total amount ÷ rate of change
• Capacity relationships: Know all conversion factors in the system
- Converting larger units to smaller units
- Calculating total smaller units needed
- Finding how many small parts make up a large whole
- Rate calculations (speed × time = distance)
- Converting smaller units to larger units
- Calculating how many fit in a total amount
- Finding average quantities
- Rate calculations (distance ÷ time = speed)
Conversion Operation: The mathematical operation (multiplication or division) used to change from one unit to another
Direct Proportion: When converting to smaller units, the number increases proportionally
Inverse Proportion: When converting to larger units, the number decreases proportionally
- Identify units: Determine starting and target units
- Compare sizes: Which unit is larger/smaller?
- Apply rule: Smaller unit → multiply, Larger unit → divide
- Check logic: Does the result make sense?
- Verify: Do the reverse operation to check
• Time: 60 seconds = 1 minute, 60 minutes = 1 hour, 24 hours = 1 day
• Length: 12 inches = 1 foot, 3 feet = 1 yard, 1,760 yards = 1 mile
• Weight: 16 ounces = 1 pound, 2,000 pounds = 1 ton
• Capacity: 8 ounces = 1 cup, 2 cups = 1 pint, 2 pints = 1 quart, 4 quarts = 1 gallon
Time Units: 60 seconds = 1 minute, 60 minutes = 1 hour, 24 hours = 1 day
Rate Problems: Rate × Time = Amount, Amount ÷ Time = Rate
Converting from hours to minutes
1 hour = 60 minutes
Hours is the larger unit, minutes is the smaller unit
Operation: Multiplication (converting to smaller unit)
2.5 hours × 60 minutes/hour = 150 minutes
Rate: $12 per hour
Time: 2.5 hours
Operation: Multiplication (rate × time = cost)
$12/hour × 2.5 hours = $30
150 minutes, $30 cost
• Time conversion: Larger to smaller unit requires multiplication
• Rate calculations: Rate × Time = Total Amount
• Decimal handling: Treat decimal numbers like whole numbers in operations
Weight Relationships: 1 ton = 2,000 pounds
Division for Counting: To find how many smaller units fit in a larger amount
Rate Problems: Total ÷ Rate = Time
Conversion: 1 ton = 2,000 pounds
Operation: Multiplication (larger to smaller unit)
3 tons × 2,000 pounds/ton = 6,000 pounds
Total grain: 6,000 pounds
Bag capacity: 40 pounds/bag
Operation: Division (how many fit?)
6,000 pounds ÷ 40 pounds/bag = 150 bags
Total bags: 150
Packing rate: 5 bags/hour
Operation: Division (total ÷ rate = time)
150 bags ÷ 5 bags/hour = 30 hours
150 bags, 30 hours to pack
• Sequential conversions: Convert to intermediate units when needed
• Division for counting: How many of X fit into Y?
• Rate calculations: Total ÷ Rate = Time
Unit Conversion: The process of changing a measurement from one unit to another equivalent unit while preserving the actual quantity being measured
Conversion Factor: A specific number that represents the relationship between two units, used to multiply or divide when converting between them
Multiplication in Conversions: Used when converting from a larger unit to a smaller unit because it takes more of the smaller units to equal the same amount
Division in Conversions: Used when converting from a smaller unit to a larger unit because it takes fewer of the larger units to equal the same amount
- Identify units: Name the starting unit and the target unit
- Compare sizes: Determine which unit is larger and which is smaller
- Select operation: Smaller unit ← Larger unit: MULTIPLY, Smaller unit → Larger unit: DIVIDE
- Apply conversion factor: Use the known relationship between units
- Calculate: Perform the mathematical operation carefully
- Verify: Check if the answer makes logical sense
• Length: 12 inches = 1 foot (multiply by 12 to convert feet to inches, divide by 12 to convert inches to feet)
• Weight: 16 ounces = 1 pound (multiply by 16 to convert pounds to ounces, divide by 16 to convert ounces to pounds)
• Capacity: 4 quarts = 1 gallon (multiply by 4 to convert gallons to quarts, divide by 4 to convert quarts to gallons)
• Time: 60 minutes = 1 hour (multiply by 60 to convert hours to minutes, divide by 60 to convert minutes to hours)
Conversion Operation Guide
When to multiply:
- Converting from larger unit to smaller unit
- Feet → Inches (multiply by 12)
- Pounds → Ounces (multiply by 16)
- Gallons → Quarts (multiply by 4)
- Hours → Minutes (multiply by 60)
Reason: Need more of the smaller units to equal the same amount
When to divide:
- Converting from smaller unit to larger unit
- Inches → Feet (divide by 12)
- Ounces → Pounds (divide by 16)
- Quarts → Gallons (divide by 4)
- Minutes → Hours (divide by 60)
Reason: Need fewer of the larger units to equal the same amount
| From | To | Operation | Factor | Example |
|---|---|---|---|---|
| Feet | Inches | Multiply | 12 | 5 ft × 12 = 60 in |
| Inches | Feet | Divide | 12 | 60 in ÷ 12 = 5 ft |
| Pounds | Ounces | Multiply | 16 | 3 lb × 16 = 48 oz |
| Ounces | Pounds | Divide | 16 | 48 oz ÷ 16 = 3 lb |
| Gallons | Quarts | Multiply | 4 | 2 gal × 4 = 8 qt |