Solved Exercises on Dividing Decimals by Whole Numbers in Grade 5

Master decimal division: calculating quotients, solving word problems, and understanding decimal placement through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic decimal division
Exercise 1
Calculate 8.4 ÷ 2 using long division.
Definition:

Decimal division: Dividing a decimal number by a whole number follows the same process as whole number division, but we must properly place the decimal point in the quotient.

Long division method:
  1. Set up the division problem with the dividend (8.4) inside and divisor (2) outside
  2. Place the decimal point in the quotient directly above the decimal point in the dividend
  3. Divide as usual, bringing down each digit including the decimal part
  4. Continue until remainder is 0 or you have enough decimal places
Division
8.4 ÷ 2
Quotient
4.2
Step 1: 2 goes into 8 four times (4 × 2 = 8)
Step 2: Subtract: 8 - 8 = 0
Step 3: Bring down the decimal point and 4
Step 4: 2 goes into 4 two times (2 × 2 = 4)
Step 5: Subtract: 4 - 4 = 0, remainder is 0
Step 1: Set up the problem

2 ) 8.4 ( place decimal point in quotient above decimal point in dividend

Step 2: Divide the whole number part

2 goes into 8 four times, write 4 in the quotient

Step 3: Handle the decimal part

Bring down the decimal point and the 4, divide 4 by 2 to get 2

Step 4: Verify the answer

Multiply quotient by divisor: 4.2 × 2 = 8.4 ✓

8.4 ÷ 2 = 4.2
Final answer:

8.4 ÷ 2 = 4.2

Applied rules:

• Decimal point placement: Place decimal in quotient directly above decimal in dividend

• Long division algorithm: Divide, multiply, subtract, bring down

• Verification: Multiply quotient by divisor to check

2 Division with remainder
Exercise 2
Calculate 12.5 ÷ 4 using long division. Round to the nearest hundredth.
Definition:

Division with remainder: When division doesn't result in a whole number, continue the process by adding zeros after the decimal point until desired precision is reached.

Step 1: 4 goes into 12 three times (3 × 4 = 12)
Step 2: Subtract: 12 - 12 = 0
Step 3: Bring down decimal point and 5
Step 4: 4 goes into 5 once (1 × 4 = 4), remainder 1
Step 5: Bring down 0, 4 goes into 10 twice (2 × 4 = 8), remainder 2
Step 6: Bring down 0, 4 goes into 20 five times (5 × 4 = 20), remainder 0
Division
12.5 ÷ 4
Quotient
3.125
Rounded
3.13
Step 1: Set up the division

4 ) 12.500 ( add extra zeros for precision

Step 2: Divide the whole number part

4 goes into 12 three times, remainder 0

Step 3: Continue with decimal part

4 goes into 5 once, then into 10 twice, then into 20 five times

Step 4: Round to nearest hundredth

3.125 rounds to 3.13 since the thousandths digit is 5

Step 5: Verify the answer

3.125 × 4 = 12.5 ✓

12.5 ÷ 4 = 3.13 (rounded)
Final answer:

12.5 ÷ 4 = 3.13 (rounded to the nearest hundredth)

Applied rules:

• Adding zeros: Add zeros after decimal to continue division

• Rounding rules: Look at digit to the right of rounding place

• Decimal precision: Continue division until desired accuracy

3 Word problem application
Exercise 3
Four friends equally share a bill of $28.60. How much does each person pay?
Definition:

Word problem setup: To find equal shares, divide the total amount by the number of people sharing.

Step 1: 4 goes into 28 seven times (7 × 4 = 28)
Step 2: Subtract: 28 - 28 = 0
Step 3: Bring down decimal point and 6
Step 4: 4 goes into 6 once (1 × 4 = 4), remainder 2
Step 5: Bring down 0, 4 goes into 20 five times (5 × 4 = 20)
Step 6: Remainder is 0, division complete
Total ÷ People
$28.60 ÷ 4
Each person pays
$7.15
Step 1: Identify the division needed

Total bill ($28.60) ÷ number of people (4) = amount per person

Step 2: Set up the division

4 ) $28.60 ( place decimal point in quotient

Step 3: Perform the division

Divide 28 by 4 to get 7, then 6 by 4 to get 1 with remainder 2, then 20 by 4 to get 5

Step 4: Interpret the result

Each person pays $7.15

Step 5: Verify the answer

$7.15 × 4 = $28.60 ✓

$28.60 ÷ 4 = $7.15 per person
Final answer:

Each person pays $7.15.

Applied rules:

• Equal sharing: Total ÷ number of people = amount per person

• Money division: Round to nearest cent if necessary

• Contextual interpretation: Answer must make sense in the problem context

Decimal Division Rules and Methods
\(\frac{\text{Decimal}}{\text{Whole Number}} = \text{Quotient}\)
Decimal Division Formula
Rule 1
Decimal point placement
Place in quotient directly above dividend
Rule 2
Add zeros if needed
Continue division for precision
Rule 3
Check your work
Multiply quotient by divisor
Key definitions:

Dividend: The number being divided (the decimal number)

Divisor: The number doing the dividing (the whole number)

Quotient: The result of the division

Remainder: What's left over after division

Complete methodology:
  1. Set up the division: Write dividend inside the division bracket, divisor outside
  2. Place decimal point: Put decimal point in quotient directly above decimal in dividend
  3. Divide as usual: Use long division algorithm (divide, multiply, subtract, bring down)
  4. Add zeros if needed: Continue division by adding zeros after decimal
  5. Round if necessary: Round to specified precision
  6. Verify: Multiply quotient by divisor to check
Tip 1: Always place the decimal point in the quotient before you start dividing the decimal part.
Tip 2: If the divisor doesn't go into the current number, write 0 in the quotient and bring down the next digit.
Tip 3: Adding zeros after the decimal doesn't change the value of the number (12.5 = 12.500).
Tip 4: Estimate first - 8.4 ÷ 2 should be close to 8 ÷ 2 = 4, so 4.2 makes sense.
Common errors: Forgetting to place decimal point in quotient, misaligning digits during long division, not continuing division when there's a remainder.
Estimation check: Before calculating, estimate the answer to check if your result is reasonable.
Decimal division steps:

• Step 1: Set up the division problem with dividend and divisor

• Step 2: Place decimal point in quotient directly above decimal in dividend

• Step 3: Divide the whole number part

• Step 4: Continue with decimal part, adding zeros if needed

• Step 5: Round to specified precision if required

Decimal Division Practice: Real World Applications
Exercise 6: Sharing Costs
Calculate how much each person pays when sharing these bills:
Bill A: $45.60 ÷ 3 people
Bill B: $32.85 ÷ 5 people
Bill C: $78.90 ÷ 6 people

Analysis: The chart shows how decimal division helps calculate equal shares in real-life scenarios.

  • Bill A: $45.60 ÷ 3 = $15.20 per person
  • Bill B: $32.85 ÷ 5 = $6.57 per person
  • Bill C: $78.90 ÷ 6 = $13.15 per person

Questions & Answers

Question: I always forget where to put the decimal point in the quotient. How can I remember?

Answer: Here are several strategies to remember decimal point placement:

  • Visual alignment: Draw a straight vertical line from the decimal in the dividend up to the quotient - this is where the decimal goes
  • Place first: Always place the decimal point in the quotient BEFORE you start dividing the decimal part
  • Think of it as "bringing down": When you "bring down" the decimal from the dividend, it goes straight up into the quotient

Example: In 8.4 ÷ 2, when you set up the division, place the decimal point in the quotient directly above the decimal in 8.4:
2 ) 8.4
↓
4.2

The decimal in the dividend creates a "path" straight up to the quotient. Practice this alignment consistently, and it will become automatic.

Question: What do I do when the divisor doesn't go into the current number during long division?

Answer: This is a common situation in long division! When the divisor is larger than the current number you're working with:

  • Write 0 in the quotient: This holds the place value
  • Bring down the next digit: Combine it with the current number to make a larger number
  • Try again: See if the divisor goes into this new number

Example: In 12.5 ÷ 4, when we have remainder 1 and bring down 0 to make 10, we write 2 in the quotient because 4 goes into 10 twice. If we had remainder 1 and brought down 0 to make 10, but 4 didn't go into 10 evenly, we'd write 2 (since 4×2=8) and have remainder 2.

The key is: if the divisor doesn't go into the current number, write 0 and bring down the next digit. Never skip a digit in the dividend!

Question: How do I know when to divide in a word problem?

Answer: Look for these key phrases and situations that indicate division is needed:

  • Equal sharing: "shared equally," "divided among," "split between," "each person gets"
  • Per unit: "per person," "per day," "per hour," "cost per item"
  • Average: "average amount," "mean value," "equally distributed"
  • Grouping: "how many groups," "how many in each group"

In our example "Four friends equally share a bill of $28.60," the phrase "equally share" indicates division. We divide the total amount by the number of people to find how much each person pays.

Ask yourself: "Am I trying to find how much each person gets when a total is shared equally?" If yes, you need division. The total becomes the dividend, and the number of people/shares becomes the divisor.