Solved Exercises on Angles and Their Measures in Grade 5

Master angles and their measures: types of angles, measuring angles, angle relationships, and geometric applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Measuring Angles
Exercise 1
Use a protractor to measure the following angle:
∠ABC where point B is the vertex and rays BA and BC form the angle. The angle measures 45°.
Definition:

Angle: The figure formed by two rays sharing a common endpoint called the vertex. The unit of measure is degrees (°).

Protractor usage method:
  1. Place the center of the protractor on the vertex of the angle
  2. Align one ray of the angle with the zero line of the protractor
  3. Read the degree measure where the other ray crosses the protractor scale
Angle Name
∠ABC
Measurement
45°
Step 1: Identify the angle parts

Vertex B, rays BA and BC form ∠ABC

Step 2: Place the protractor

Center on vertex B, align ray BA with 0°

Step 3: Read the measurement

Ray BC intersects at 45° mark

Step 4: Classify the angle

45° is less than 90°, so it's an acute angle

∠ABC = 45° (Acute Angle)
Final answer:

∠ABC measures 45° and is classified as an acute angle

Applied rules:

• Angle classification: Acute (0° < angle < 90°), Right (90°), Obtuse (90° < angle < 180°), Straight (180°)

• Protractor alignment: Center on vertex, align with zero line

• Reading scale: Use inner or outer scale depending on alignment

2 Classifying Angles
Exercise 2
Classify the following angles:
a) 30°
b) 90°
c) 120°
d) 180°
Definition:

Angle Classification: Based on degree measure: acute (0°-90°), right (90°), obtuse (90°-180°), straight (180°)

Angle A
30°
Classification
Acute
Step 1: Compare 30° to benchmarks

30° > 0° and 30° < 90° → Acute angle

Step 2: Compare 90° to benchmarks

90° = 90° → Right angle

Step 3: Compare 120° to benchmarks

120° > 90° and 120° < 180° → Obtuse angle

Step 4: Compare 180° to benchmarks

180° = 180° → Straight angle

a) 30° = Acute | b) 90° = Right | c) 120° = Obtuse | d) 180° = Straight
Final answer:

a) 30° is acute, b) 90° is right, c) 120° is obtuse, d) 180° is straight

Applied rules:

• Acute angle: Greater than 0° but less than 90°

• Right angle: Exactly 90°

• Obtuse angle: Greater than 90° but less than 180°

• Straight angle: Exactly 180°

3 Finding Missing Angles
Exercise 3
Two angles are supplementary. One angle measures 115°. Find the measure of the other angle.
Definition:

Supplementary angles: Two angles whose measures add up to 180°

Given angle
115°
Supplementary rule
A + B = 180°
Missing angle
65°
Step 1: Understand supplementary relationship

Supplementary angles sum to 180°

Step 2: Set up equation

Known angle + Unknown angle = 180°

115° + x° = 180°

Step 3: Solve for unknown angle

x° = 180° - 115° = 65°

Step 4: Verify the solution

115° + 65° = 180° ✓

The missing angle measures 65°
Final answer:

The other angle measures 65°

Applied rules:

• Supplementary angles: Sum equals 180°

• Complementary angles: Sum equals 90°

• Algebraic method: Set up equation and solve

Rules and methods, laws,...
Acute: 0° < θ < 90°
Angle Classification
Acute Angle
0° < θ < 90°
Less than 90°
Right Angle
θ = 90°
Exactly 90°
Obtuse Angle
90° < θ < 180°
Between 90° and 180°
Straight Angle
θ = 180°
Exactly 180°
Complementary
A + B = 90°
Sum to 90°
Supplementary
A + B = 180°
Sum to 180°
Key Angle Relationships: Vertical angles are equal, adjacent angles share a side, linear pairs sum to 180°.
Protractor Tips: Align center with vertex, read from the scale that starts at 0° along one ray.
Tip 1: Remember that acute angles are "cute" because they are small (less than 90°).
Tip 2: A right angle forms a perfect L-shape, like the corner of a square.
Tip 3: Supplementary angles always form a straight line when placed together.
Tip 4: Complementary angles always form a right angle when placed together.
Solution: Exercises 4 to 5
4 Angle Addition
Exercise 4
In the figure, ∠ABC is divided by ray BD into two angles: ∠ABD = 35° and ∠DBC = 55°. Find the measure of ∠ABC.
Definition:

Angle addition postulate: If point D lies in the interior of ∠ABC, then ∠ABD + ∠DBC = ∠ABC

∠ABD
35°
∠DBC
55°
∠ABC
90°
Step 1: Identify the relationship

Ray BD divides ∠ABC into two smaller angles

Step 2: Apply the angle addition postulate

∠ABD + ∠DBC = ∠ABC

35° + 55° = ∠ABC

Step 3: Calculate the sum

35° + 55° = 90°

Step 4: Verify the result

∠ABC = 90°, which means it's a right angle

∠ABC = 90° (Right Angle)
Final answer:

∠ABC measures 90°

Applied rules:

• Angle addition postulate: Parts of an angle sum to the whole angle

• Classification: 90° is a right angle

• Verification: Check that parts add up correctly

5 Real-World Application
Exercise 5
A ladder leans against a wall forming a 75° angle with the ground. What is the measure of the angle between the ladder and the wall?
Definition:

Perpendicular lines: Lines that intersect at right angles (90°). The ladder, ground, and wall form a right triangle.

Ladder-ground angle
75°
Triangle sum
180°
Wall-ladder angle
15°
Step 1: Identify the geometric situation

The ladder, ground, and wall form a right triangle (wall ⊥ ground)

Step 2: Identify known angles

One angle is 90° (right angle), another is 75° (ladder-ground)

Step 3: Apply triangle angle sum theorem

Sum of angles in a triangle = 180°

90° + 75° + x° = 180°

Step 4: Solve for the unknown angle

165° + x° = 180°

x° = 180° - 165° = 15°

Step 5: Verify the solution

90° + 75° + 15° = 180° ✓

The angle between the ladder and the wall is 15°
Final answer:

The angle between the ladder and the wall measures 15°

Applied rules:

• Triangle angle sum: All three angles sum to 180°

• Right triangle: Contains one 90° angle

• Real-world application: Connect geometry to practical problems

Key Concepts: Angle Properties, Types, and Relationships
∠A + ∠B = 90° (complementary)
Angle Relationships
Key definitions:

Angle: A figure formed by two rays with a common endpoint (vertex)

Protractor: Tool used to measure angles in degrees

Vertex: The common endpoint of the two rays forming an angle

Complementary angles: Two angles that sum to 90°

Supplementary angles: Two angles that sum to 180°

Complete methodology:
  1. Identify the angle parts: Locate vertex and rays
  2. Measure if needed: Use protractor correctly
  3. Classify the angle: Determine if acute, right, obtuse, or straight
  4. Apply relationships: Use complementary, supplementary, or angle addition
  5. Verify the result: Check calculations and logic
Tip 1: When using a protractor, make sure the vertex aligns with the center mark.
Tip 2: Remember that vertical angles are always equal when two lines intersect.
Tip 3: Adjacent angles share a common vertex and side but don't overlap.
Tip 4: Linear pairs of angles are supplementary (they form a straight line).
Common errors: Misreading protractor scales, confusing complementary with supplementary, misidentifying angle types.
Exam preparation: Practice angle classification, learn angle relationships, master protractor use.
Essential facts to remember:

• Acute angle: 0° < angle < 90°

• Right angle: angle = 90°

• Obtuse angle: 90° < angle < 180°

• Straight angle: angle = 180°

• Complementary angles: sum = 90°

• Supplementary angles: sum = 180°

• Triangle angle sum: total = 180°

Visual Learning: Angle Types and Properties
Understanding Angle Relationships
Visual representation of different angle types and their relationships:
- Acute angles (0°-90°)
- Right angles (90°)
- Obtuse angles (90°-180°)
- Straight angles (180°)

Key Relationships: Understanding how angles relate to each other is crucial for solving geometric problems.

  • Vertical angles are always equal
  • Adjacent angles on a straight line are supplementary
  • Angles around a point sum to 360°
  • Interior angles of a triangle sum to 180°

Questions & Answers

Question: I'm confused about complementary and supplementary angles. How do I remember which is which?

Answer: Great question! Here are memory aids:

  • Complementary: Think "C" for "Corner" (90° corner) or "C" for "Complete" (completes a right angle). Complementary angles add up to 90°.
  • Supplementary: Think "S" for "Straight" (180° makes a straight line). Supplementary angles add up to 180°.

Examples:
Complementary: 30° + 60° = 90°
Supplementary: 110° + 70° = 180°

Remember: C comes before S in the alphabet, just like 90° comes before 180°!

Question: When I measure angles with a protractor, sometimes I get confused about which scale to read. How do I know which one to use?

Answer: Here's the foolproof method:

  • Always align the center of the protractor with the vertex of the angle
  • Line up one side of the angle with the 0° mark on the protractor
  • Follow the other side of the angle to where it crosses the protractor scale
  • Read the number where the second ray crosses the scale

If the angle opens to the right, use the bottom scale. If it opens to the left, use the top scale. The key is ensuring one ray passes through 0°!

Practice tip: Start by measuring right angles (should read 90°) to verify your technique.

Question: What's the difference between adjacent angles and vertical angles?

Answer: These are completely different concepts:

  • Adjacent angles: Share a common vertex and a common side, but don't overlap. They're next to each other.
  • Vertical angles: Formed when two lines intersect. They're opposite each other and always equal.

Example of adjacent: Two angles that share a ray
Example of vertical: When you draw an "X", the angles across from each other are vertical angles and equal.

Key difference: Adjacent angles are neighbors, vertical angles are opposites!

Question: Why do triangles always have angles that add up to 180°? Is this true for all triangles?

Answer: Yes, this is true for ALL triangles in Euclidean geometry! Here's why:

Imagine cutting out a triangle and tearing off its three corners. If you place them together at a point, they form a straight line, which measures 180°.

This happens because of the parallel postulate in Euclidean geometry. The sum of interior angles of any triangle equals 180° regardless of shape or size.

This property helps us find missing angles: if you know two angles, subtract their sum from 180° to find the third.

Note: This doesn't apply to triangles on curved surfaces (non-Euclidean geometry).

Question: How can I quickly identify if an angle is acute, right, or obtuse without measuring it?

Answer: Here are quick visual identification strategies:

  1. Right angle (90°): Looks like the corner of a square or rectangle. Forms a perfect L-shape.
  2. Acute angle: Smaller than a right angle. It looks "sharp" or "pointy."
  3. Obtuse angle: Larger than a right angle but smaller than a straight line. It looks "wide" or "blunt."

Memory trick: Think of acute angles as "cute" because they're small, obtuse angles as "obvious" because they're large, and right angles as "right" because they're correct (perfect corner).

With practice, you'll develop a good sense for estimating angle measures!