Solved Exercises on Graphing Linear Relationships in Grade 5

Master coordinate planes, ordered pairs, linear relationships, and graphing patterns through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Coordinate Plane Basics
Exercise 1
Plot the following ordered pairs on a coordinate plane: A(2, 3), B(4, 1), C(1, 5), D(3, 4)
Definition:

Ordered Pair: Two numbers written in parentheses (x, y) where x is the horizontal coordinate and y is the vertical coordinate

Coordinate Plane: A flat surface divided by two perpendicular number lines called axes

Plotting Method:
  1. Start at the origin (0, 0)
  2. Move horizontally according to the x-coordinate (right for positive, left for negative)
  3. Move vertically according to the y-coordinate (up for positive, down for negative)
  4. Mark the point where the movements end
Point A
(2, 3)
Point B
(4, 1)
Point C
(1, 5)
Point D
(3, 4)
Step 1: Understand the coordinate system

• X-axis: Horizontal number line (left to right)

• Y-axis: Vertical number line (bottom to top)

• Origin: Point (0, 0) where axes intersect

Step 2: Plot Point A(2, 3)

• Start at origin (0, 0)

• Move 2 units right along x-axis

• Move 3 units up along y-axis

• Mark point A

Step 3: Plot remaining points

• B(4, 1): 4 right, 1 up

• C(1, 5): 1 right, 5 up

• D(3, 4): 3 right, 4 up

Points plotted: A(2,3), B(4,1), C(1,5), D(3,4)
Final answer:

All four points correctly plotted on the coordinate plane

Applied rules:

• Order matters: (x, y) not (y, x)

• Positive direction: Right for x, Up for y

• Negative direction: Left for x, Down for y

2 Linear Relationship Pattern
Exercise 2
Complete the table and graph the linear relationship: y = x + 2
x: 0, 1, 2, 3, 4
y: ?, ?, ?, ?, ?
Definition:

Linear Relationship: A relationship between two variables where one changes at a constant rate compared to the other

Linear Equation: An equation of the form y = mx + b where m is the slope and b is the y-intercept

Equation
y = x + 2
Pattern
+2 rule
Points
(0,2), (1,3), (2,4), (3,5), (4,6)
Step 1: Substitute x values into the equation

• When x = 0: y = 0 + 2 = 2 → (0, 2)

• When x = 1: y = 1 + 2 = 3 → (1, 3)

• When x = 2: y = 2 + 2 = 4 → (2, 4)

• When x = 3: y = 3 + 2 = 5 → (3, 5)

• When x = 4: y = 4 + 2 = 6 → (4, 6)

Step 2: Create the completed table
x y
0 2
1 3
2 4
3 5
4 6
Step 3: Plot the points and draw the line

• All points lie on a straight line

• The line has a consistent upward slope

Table completed: (0,2), (1,3), (2,4), (3,5), (4,6)
Final answer:

Linear relationship y = x + 2 creates a straight line with consistent +2 pattern

Applied rules:

• Substitution: Replace x with given values

• Consistent pattern: Linear equations produce straight lines

• Rate of change: Constant difference between consecutive y-values

3 Identifying Linear Patterns
Exercise 3
Determine if the following table represents a linear relationship:
x: 1, 2, 3, 4, 5
y: 3, 6, 9, 12, 15
If linear, find the equation.
Definition:

Linear Pattern: A sequence where the difference between consecutive y-values is constant

Constant Rate of Change: The slope of the line representing the relationship

Table
x/y values
Rate
y/x ratio
Equation
y = 3x
Step 1: Check for constant differences

• From x=1 to x=2: y increases from 3 to 6 (+3)

• From x=2 to x=3: y increases from 6 to 9 (+3)

• From x=3 to x=4: y increases from 9 to 12 (+3)

• From x=4 to x=5: y increases from 12 to 15 (+3)

• Since the difference is always +3, it's linear!

Step 2: Find the relationship

• When x=1, y=3 → 3 = 3×1

• When x=2, y=6 → 6 = 3×2

• When x=3, y=9 → 9 = 3×3

• The pattern is y = 3x

Step 3: Verify the equation

• Test with x=4: y = 3×4 = 12 ✓

• Test with x=5: y = 3×5 = 15 ✓

Step 4: Conclusion

This is a linear relationship with equation y = 3x

Linear relationship: y = 3x
Final answer:

Yes, it's linear. The equation is y = 3x

Applied rules:

• Constant difference: Check if y-values increase/decrease by same amount

• Proportional relationship: y = mx where m is the constant rate

• Verification: Always check the equation with multiple points

Linear Relationships Fundamentals
y = mx + b
Linear Equation
Slope
m = rise/run
Change in y over change in x
Y-intercept
b
Where line crosses y-axis
Ordered Pair
(x, y)
Coordinates on plane
Linear Properties: Creates a straight line when graphed, constant rate of change, predictable pattern.
Coordinate System: X-axis (horizontal), Y-axis (vertical), quadrants numbered counterclockwise.
Tip 1: Always plot at least 3 points to verify linearity.
Tip 2: Look for constant differences in y-values to identify linear patterns.
Tip 3: The y-intercept occurs when x = 0.
Tip 4: Positive slope rises, negative slope falls.
Solution: Exercises 4 to 5
4 Real-World Linear Relationship
Exercise 4
Sarah earns $5 per hour babysitting. Create a table showing her earnings for 1, 2, 3, 4, and 5 hours worked. Then graph the relationship and write the equation.
Definition:

Real-World Linear Relationship: A practical situation where one quantity changes at a constant rate relative to another

Independent Variable: The input (hours worked)

Dependent Variable: The output (earnings)

Hours
x
Earnings
y = 5x
Equation
y = 5x
Step 1: Identify the relationship

• Rate: $5 per hour

• Hours (x): 1, 2, 3, 4, 5

• Earnings (y): $5, $10, $15, $20, $25

Step 2: Create the table
Hours (x) Earnings (y)
1 5
2 10
3 15
4 20
5 25
Step 3: Write the equation

• Earnings = Rate × Hours

• y = 5x

Step 4: Graph the relationship

• Plot points (1,5), (2,10), (3,15), (4,20), (5,25)

• Draw a straight line through the points

y = 5x (linear relationship)
Final answer:

Linear equation: y = 5x, where x = hours and y = earnings

Applied rules:

• Identify variables: Determine input/output relationship

• Find the rate: Calculate constant of proportionality

• Write equation: Express relationship mathematically

5 Finding Missing Values
Exercise 5
The table below shows a linear relationship. Find the missing values:
x: 0, 1, 2, 3, 4, 5
y: 2, ?, ?, ?, ?, 17
Also find the equation of the line.
Definition:

Missing Values: Unknown coordinates that fit a known linear pattern

Rate of Change: The slope of the line connecting all points

Given
(0,2), (5,17)
Rate
slope = 3
Equation
y = 3x + 2
Step 1: Find the rate of change (slope)

• From (0,2) to (5,17): rise = 17-2 = 15, run = 5-0 = 5

• Slope = rise/run = 15/5 = 3

Step 2: Find the y-intercept

• At x=0, y=2

• So b = 2

Step 3: Write the equation

• Using y = mx + b

• y = 3x + 2

Step 4: Fill in the missing values

• When x=1: y = 3(1) + 2 = 5

• When x=2: y = 3(2) + 2 = 8

• When x=3: y = 3(3) + 2 = 11

• When x=4: y = 3(4) + 2 = 14

Step 5: Verify with final point

• When x=5: y = 3(5) + 2 = 17 ✓

Complete table: (0,2), (1,5), (2,8), (3,11), (4,14), (5,17)
Final answer:

Missing values: 5, 8, 11, 14. Equation: y = 3x + 2

Applied rules:

• Slope formula: (y₂ - y₁)/(x₂ - x₁)

• Y-intercept: Value of y when x = 0

• Substitution: Plug known values into equation to find unknowns

Linear Relationships Comprehensive Guide
y = mx + b
Linear Equation Structure
Key definitions:

Coordinate Plane: A two-dimensional surface formed by two perpendicular number lines

Ordered Pair: A pair of numbers (x, y) that locates a point on the coordinate plane

Linear Relationship: A relationship where variables change at a constant rate

Slope: The steepness of a line, calculated as rise over run

Y-intercept: The point where a line crosses the y-axis

Complete methodology:
  1. Identify the variables: Determine independent and dependent variables
  2. Find the pattern: Look for constant rate of change
  3. Calculate slope: Use rise over run formula
  4. Find y-intercept: Determine where line crosses y-axis
  5. Write equation: Put in form y = mx + b
  6. Verify: Check with known points
Tip 1: Linear relationships always graph as straight lines.
Tip 2: If y-values increase by the same amount, it's linear.
Tip 3: Always check your work by substituting back into the equation.
Tip 4: The x-coordinate comes first in an ordered pair.
Common errors: Mixing up x and y coordinates, forgetting to check for linearity, miscalculating slope.
Key concepts: Rate of change, proportional relationships, coordinate systems, graphing techniques.
Essential formulas to know:

• Linear equation: y = mx + b

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)

• Y-intercept: Point (0, b)

• Ordered pair: (x, y) where x is horizontal, y is vertical

Exercise with Visualization: Linear Relationships
Exercise 6: Comparing Linear Functions
Compare the following linear relationships:
f₁(x) = 2x + 1
f₂(x) = x + 3
f₃(x) = 3x

Analysis: The chart compares different linear relationships showing various slopes and intercepts.

  • f₁(x) = 2x + 1 (steeper slope, higher y-intercept)
  • f₂(x) = x + 3 (moderate slope, highest y-intercept)
  • f₃(x) = 3x (steepest slope, passes through origin)

Questions & Answers

Question: I keep mixing up the x and y coordinates when plotting points. How can I remember which is which?

Answer: Great question! Here are some helpful memory tricks:

  • Think of "X comes first in the alphabet, just like in (x,y)"
  • Remember "X goes across (horizontal)" - like the horizon
  • Think of "Y goes up and down" - like reaching up high
  • Use the phrase: "Run first (x), then Jump (y)"

When plotting (3, 5), move 3 units to the right first, then 5 units up. Practice with simple points like (1,2) and (2,1) to see the difference!

Question: How do I know if a table shows a linear relationship or not?

Answer: To determine if a table shows a linear relationship, check for a constant rate of change:

  • Look at the differences between consecutive x-values (should be constant)
  • Look at the differences between consecutive y-values (should be constant)
  • If y-values change by the same amount each time x increases by 1, it's linear

Example: If x increases by 1 each time and y increases by 3 each time, that's a constant rate of 3, indicating a linear relationship.

If the differences vary, it's not linear. Linear relationships always produce straight lines when graphed!

Question: What does the "b" in y = mx + b represent and why is it important?

Answer: The "b" in y = mx + b is called the y-intercept, and it's crucial because:

  • It tells us where the line crosses the y-axis (the vertical line)
  • It's the value of y when x equals zero
  • It gives us a starting point for the line

For example, in y = 2x + 3, the y-intercept is 3, which means the line passes through the point (0, 3). This is where you can start plotting the line, then use the slope "m" to find other points.

Together, "m" (slope) and "b" (y-intercept) completely define a linear relationship!