Ordered pair: A set of two numbers (x, y) where x is the horizontal coordinate (abscissa) and y is the vertical coordinate (ordinate). The order matters!
- Always read x-coordinate first, then y-coordinate
- Move horizontally by x-value (right for positive, left for negative)
- Move vertically by y-value (up for positive, down for negative)
- Mark the final position
In an ordered pair (x, y), the first number represents the horizontal position and the second number represents the vertical position
Start at origin (0,0), move 3 units to the right along x-axis, then move 5 units up along y-axis
Start at origin (0,0), move 5 units to the right along x-axis, then move 3 units up along y-axis
Point (3, 5) is 3 units right and 5 units up, while point (5, 3) is 5 units right and 3 units up
Changing the order of coordinates results in different points - this is why they're called "ordered" pairs
(3, 5) is located 3 units right and 5 units up from origin. (5, 3) is located 5 units right and 3 units up from origin. These are different points because order matters in ordered pairs.
• Order matters: (x, y) ≠ (y, x) unless x = y
• Coordinate order: Always x-coordinate first, then y-coordinate
• Plotting sequence: Horizontal movement first, then vertical movement
Equality of ordered pairs: Two ordered pairs (a, b) and (c, d) are equal if and only if a = c AND b = d. Both coordinates must match.
For two ordered pairs (a, b) and (c, d) to be equal: a = c AND b = d must both be true
First coordinates: 2 = 2 ✓
Second coordinates: -3 = -3 ✓
Both conditions met, so the pairs are equal
First coordinates: -1 ≠ 4 ✗
Second coordinates: 4 ≠ -1 ✗
Neither condition met, so the pairs are not equal
First coordinates: 0 = 0 ✓
Second coordinates: 7 = 7 ✓
Both conditions met, so the pairs are equal
First coordinates: -5 ≠ -2 ✗
Second coordinates: -2 ≠ -5 ✗
Neither condition met, so the pairs are not equal
A) (2, -3) = (2, -3) ✓, B) (-1, 4) ≠ (4, -1) ✗, C) (0, 7) = (0, 7) ✓, D) (-5, -2) ≠ (-2, -5) ✗
• Equality rule: (a, b) = (c, d) if and only if a = c AND b = d
• Order sensitivity: Swapping coordinates creates different ordered pairs
• Component-wise comparison: Compare first coordinates, then second coordinates
Coordinate quadrants: Four regions of the coordinate plane determined by the signs of x and y coordinates: I(+,+), II(-,+), III(-,-), IV(+,-).
P(4, 2): x = 4 (positive), y = 2 (positive)
Q(-3, 5): x = -3 (negative), y = 5 (positive)
R(-2, -4): x = -2 (negative), y = -4 (negative)
S(5, -3): x = 5 (positive), y = -3 (negative)
Both coordinates are positive → Point is in Quadrant I
x is negative, y is positive → Point is in Quadrant II
Both coordinates are negative → Point is in Quadrant III
x is positive, y is negative → Point is in Quadrant IV
T(0, 4): Since x = 0, point is on Y-axis (not in any quadrant)
U(-3, 0): Since y = 0, point is on X-axis (not in any quadrant)
P(4,2) in Quadrant I, Q(-3,5) in Quadrant II, R(-2,-4) in Quadrant III, S(5,-3) in Quadrant IV, T(0,4) on Y-axis, U(-3,0) on X-axis.
• Quadrant I: (+, +) - both coordinates positive
• Quadrant II: (-, +) - x negative, y positive
• Quadrant III: (-, -) - both coordinates negative
• Quadrant IV: (+, -) - x positive, y negative
• Axis points: Points with x=0 are on Y-axis, points with y=0 are on X-axis
Ordered pair: A pair of numbers (x, y) used to locate a point on the coordinate plane, where x is the horizontal coordinate and y is the vertical coordinate
Coordinate plane: A two-dimensional surface formed by the intersection of horizontal (x-axis) and vertical (y-axis) number lines
Equality of ordered pairs: Two ordered pairs are equal only if their corresponding coordinates are equal
- Read order: Always read x-coordinate first, then y-coordinate
- Plotting sequence: Move horizontally first, then vertically
- Sign interpretation: Positive values move right/up, negative values move left/down
- Comparison: Compare both coordinates separately to check equality
• Order rule: (x, y) ≠ (y, x) unless x = y
• Equality rule: (a, b) = (c, d) if and only if a = c AND b = d
• Quadrant rule: Based on signs of x and y coordinates
• Axis rule: Points with x=0 are on Y-axis, points with y=0 are on X-axis
Reflection across x-axis: (x, y) → (x, -y). Reflection across y-axis: (x, y) → (-x, y). Reflection across origin: (x, y) → (-x, -y).
Reflection across x-axis: Keep x-coordinate, change sign of y-coordinate
Reflection across y-axis: Change sign of x-coordinate, keep y-coordinate
Reflection across origin: Change signs of both coordinates
V(3, -2) → (3, -(-2)) = (3, 2)
V(3, -2) → (-3, -2)
V(3, -2) → (-3, -(-2)) = (-3, 2)
Each reflection maintains equal distance from the line/point of reflection
A) Reflection across x-axis: (3, 2), B) Reflection across y-axis: (-3, -2), C) Reflection across origin: (-3, 2).
• X-axis reflection: (x, y) → (x, -y)
• Y-axis reflection: (x, y) → (-x, y)
• Origin reflection: (x, y) → (-x, -y)
Distance formula: \(d = \sqrt{(x_2-x_1)^2 + (y_2-y_1)^2}\). For points with same x or y coordinates, simplified formulas apply.
Both points have the same y-coordinate (y = 3), so they form a horizontal line segment
For horizontal lines: distance = |x₂ - x₁| = |4 - (-2)| = |6| = 6 units
Both points have the same x-coordinate (x = 1), so they form a vertical line segment
For vertical lines: distance = |y₂ - y₁| = |5 - (-2)| = |7| = 7 units
Horizontal line (same y): distance = |x₂ - x₁|
Vertical line (same x): distance = |y₂ - y₁|
General case: distance = √[(x₂-x₁)² + (y₂-y₁)²]
The distance between W(-2, 3) and X(4, 3) is 6 units. The distance between Y(1, -2) and Z(1, 5) is 7 units.
• Horizontal distance: For points (a, c) and (b, c), distance = |a - b|
• Vertical distance: For points (c, a) and (c, b), distance = |a - b|
• General distance: d = √[(x₂-x₁)² + (y₂-y₁)²]
Ordered pair: A mathematical notation (x, y) that specifies the position of a point in a two-dimensional coordinate system
Coordinate system: A system that uses numbers to determine the position of points in space
Reflection: A transformation that creates a mirror image of a point across a line or point
Distance: The length of the shortest path between two points
Quadrant: One of the four regions created by the intersection of the x-axis and y-axis
- Identify coordinates: Always note which number is x-coordinate and which is y-coordinate
- Understand order: Remember that (x, y) ≠ (y, x) unless x = y
- Apply transformations: Use appropriate rules for reflections, rotations, etc.
- Calculate distances: Use appropriate distance formula based on point configuration
- Verify results: Check that answers make geometric sense
• Equality: (a, b) = (c, d) if and only if a = c and b = d
• X-axis reflection: (x, y) → (x, -y)
• Y-axis reflection: (x, y) → (-x, y)
• Origin reflection: (x, y) → (-x, -y)
• Horizontal distance: For (a, c) and (b, c), distance = |a - b|
• Vertical distance: For (c, a) and (c, b), distance = |a - b|
Plot these points and analyze the pattern they form in relation to ordered pairs.
Analysis: The ordered pairs demonstrate symmetric relationships across axes.
- A(2,3) and B(-2,3) are symmetric across the Y-axis
- A(2,3) and D(2,-3) are symmetric across the X-axis
- A(2,3) and C(-2,-3) are symmetric across the origin
- All four points form a rectangle with sides parallel to the axes