Solved Exercises on Understanding the Coordinate Grid in Grade 6

Master coordinate grids: plotting points, identifying quadrants, distance calculation, and geometric applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Plotting Points
Exercise 1
Plot the following points on the coordinate grid:
A(3, 4), B(-2, 5), C(-4, -3), D(5, -2)
Definition:

Ordered pair: (x, y) where x is the horizontal coordinate (abscissa) and y is the vertical coordinate (ordinate)

Plotting method:
  1. Start at origin (0, 0)
  2. Move horizontally by x-value (right for positive, left for negative)
  3. Move vertically by y-value (up for positive, down for negative)
  4. Mark the point at the final location
Point A(3, 4)
Right 3, Up 4
Point B(-2, 5)
Left 2, Up 5
Point C(-4, -3)
Left 4, Down 3
Point D(5, -2)
Right 5, Down 2
Step 1: Understand the coordinate system

The coordinate grid has two perpendicular number lines: the x-axis (horizontal) and y-axis (vertical) intersecting at origin (0,0)

Step 2: Plot Point A(3, 4)

Starting from origin (0,0), move 3 units right along x-axis, then 4 units up along y-axis

Step 3: Plot Point B(-2, 5)

Starting from origin (0,0), move 2 units left along x-axis (negative direction), then 5 units up along y-axis

Step 4: Plot Point C(-4, -3)

Starting from origin (0,0), move 4 units left along x-axis, then 3 units down along y-axis (negative direction)

Step 5: Plot Point D(5, -2)

Starting from origin (0,0), move 5 units right along x-axis, then 2 units down along y-axis

Points A, B, C, D correctly plotted on coordinate grid
Final answer:

Point A(3,4) in Quadrant I, B(-2,5) in Quadrant II, C(-4,-3) in Quadrant III, D(5,-2) in Quadrant IV

Applied rules:

• Order matters: Always read x-coordinate first, then y-coordinate

• Direction: Positive x moves right, negative x moves left

• Direction: Positive y moves up, negative y moves down

• Quadrants: I(+,+), II(-,+), III(-,-), IV(+,-)

2 Identifying Quadrants
Exercise 2
Determine the quadrant for each point:
E(7, 2), F(-5, 8), G(-3, -6), H(4, -9), I(0, 5), J(-4, 0)
Definition:

Coordinate quadrants: Four regions created by x and y axes, numbered counterclockwise starting from top right

Point E(7, 2)
Both positive → QI
Point F(-5, 8)
x neg, y pos → QII
Point G(-3, -6)
Both negative → QIII
Point H(4, -9)
x pos, y neg → QIV
I(0,5) on y-axis, J(-4,0) on x-axis
Step 1: Understand quadrant rules

Quadrant I: Both x and y are positive (+, +)
Quadrant II: x is negative, y is positive (-, +)
Quadrant III: Both x and y are negative (-, -)
Quadrant IV: x is positive, y is negative (+, -)

Step 2: Analyze Point E(7, 2)

x = 7 (positive), y = 2 (positive) → Both positive → Quadrant I

Step 3: Analyze Point F(-5, 8)

x = -5 (negative), y = 8 (positive) → Negative x, positive y → Quadrant II

Step 4: Analyze Point G(-3, -6)

x = -3 (negative), y = -6 (negative) → Both negative → Quadrant III

Step 5: Analyze Point H(4, -9)

x = 4 (positive), y = -9 (negative) → Positive x, negative y → Quadrant IV

Step 6: Special Cases

Point I(0, 5) lies on y-axis (not in any quadrant)
Point J(-4, 0) lies on x-axis (not in any quadrant)

E in QI, F in QII, G in QIII, H in QIV, I on y-axis, J on x-axis
Final answer:

E(7,2)→QI, F(-5,8)→QII, G(-3,-6)→QIII, H(4,-9)→QIV, I(0,5)→y-axis, J(-4,0)→x-axis

Applied rules:

• Quadrant I: (+, +) - both coordinates positive

• Quadrant II: (-, +) - x negative, y positive

• Quadrant III: (-, -) - both coordinates negative

• Quadrant IV: (+, -) - x positive, y negative

• Axes: Points on axes are not in any quadrant

3 Distance Between Points
Exercise 3
Find the distance between points K(2, 3) and L(6, 3). Also find the distance between M(-1, 4) and N(-1, -2).
Definition:

Distance formula: \(d = \sqrt{(x_2-x_1)^2 + (y_2-y_1)^2}\). For horizontal/vertical lines, use absolute differences.

K(2,3) to L(6,3)
Horizontal line
Distance
|6-2| = 4 units
M(-1,4) to N(-1,-2)
Vertical line
Distance
|4-(-2)| = 6 units
Step 1: Identify point coordinates

K(2, 3) and L(6, 3) - both have same y-coordinate, so they form a horizontal line

M(-1, 4) and N(-1, -2) - both have same x-coordinate, so they form a vertical line

Step 2: Calculate distance for K to L

Since y-coordinates are the same, distance = |x₂ - x₁| = |6 - 2| = 4 units

Step 3: Calculate distance for M to N

Since x-coordinates are the same, distance = |y₂ - y₁| = |4 - (-2)| = |4 + 2| = 6 units

Step 4: General distance formula

For any two points (x₁, y₁) and (x₂, y₂), distance = √[(x₂-x₁)² + (y₂-y₁)²]

Step 5: Verification

Using general formula for K to L: √[(6-2)² + (3-3)²] = √[16 + 0] = √16 = 4 ✓

Using general formula for M to N: √[(-1-(-1))² + (-2-4)²] = √[0 + 36] = √36 = 6 ✓

Distance KL = 4 units, Distance MN = 6 units
Final answer:

Distance between K(2,3) and L(6,3) is 4 units. Distance between M(-1,4) and N(-1,-2) is 6 units.

Applied rules:

• Horizontal lines: Distance = |x₂ - x₁| when y₁ = y₂

• Vertical lines: Distance = |y₂ - y₁| when x₁ = x₂

• General formula: d = √[(x₂-x₁)² + (y₂-y₁)²]

• Absolute value: Distance is always positive

Coordinate Grid Fundamentals
\((x, y)\)
Ordered Pair
Quadrant I
\((+,+)\)
Both positive
Quadrant II
\((-,+)\)
x negative, y positive
Quadrant III
\((-,-)\)
Both negative
Quadrant IV
\((+,-)\)
x positive, y negative
Key definitions:

Coordinate grid: A two-dimensional plane formed by intersecting x-axis and y-axis

Origin: The point (0,0) where the axes intersect

Ordered pair: A set of coordinates (x,y) that locates a specific point

Plotting methodology:
  1. Identify coordinates: Read x-value first, then y-value
  2. Start at origin: Begin at point (0,0)
  3. Move horizontally: Right for positive x, left for negative x
  4. Move vertically: Up for positive y, down for negative y
  5. Mark point: Place dot at final location
Tip 1: Remember "Run first, then Rise" - x-axis movement comes before y-axis.
Tip 2: Points on x-axis have y=0, points on y-axis have x=0.
Tip 3: The coordinate grid is divided into four quadrants.
Tip 4: Always move right/left first, then up/down.
Common errors: Mixing up x and y coordinates, moving in wrong direction for negative values.
Exam preparation: Practice plotting points in all quadrants, identify quadrants quickly, calculate distances.
Coordinate grid rules:

• Direction rule: Positive x moves right, negative x moves left

• Direction rule: Positive y moves up, negative y moves down

• Quadrant rule: I(++), II(-+), III(--), IV(+-)

• Distance rule: Horizontal = |x₂-x₁|, Vertical = |y₂-y₁|

• General rule: d = √[(x₂-x₁)² + (y₂-y₁)²]

Solution: Exercises 4 to 5
4 Geometric Shapes
Exercise 4
Plot the vertices P(1, 1), Q(4, 1), R(4, 3), S(1, 3) and connect them. What shape is formed? Find its area and perimeter.
Definition:

Rectangle: A quadrilateral with opposite sides equal and all angles 90°

Vertices
P(1,1), Q(4,1), R(4,3), S(1,3)
Length
|4-1| = 3 units
Width
|3-1| = 2 units
Step 1: Plot all vertices

P(1,1) in Quadrant I, Q(4,1) in Quadrant I, R(4,3) in Quadrant I, S(1,3) in Quadrant I

Step 2: Connect the points

Connect P→Q→R→S→P in order to form a closed shape

Step 3: Identify the shape

Opposite sides are parallel and equal: PQ = SR = 3 units, PS = QR = 2 units

All angles are 90° → Rectangle

Step 4: Calculate area

Area of rectangle = length × width = 3 × 2 = 6 square units

Step 5: Calculate perimeter

Perimeter = 2(length + width) = 2(3 + 2) = 2(5) = 10 units

Shape: Rectangle, Area: 6 sq units, Perimeter: 10 units
Final answer:

The shape formed is a rectangle with area = 6 square units and perimeter = 10 units.

Applied rules:

• Rectangle identification: Opposite sides equal, all angles 90°

• Area formula: length × width

• Perimeter formula: 2(length + width)

• Distance calculation: Use coordinate differences for side lengths

5 Midpoint Calculation
Exercise 5
Find the midpoint of the line segment connecting T(2, 5) and U(8, 1). Verify by plotting both points and the midpoint.
Definition:

Midpoint formula: \(M = \left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)\) - the point halfway between two endpoints

Points T(2,5) and U(8,1)
T(x₁,y₁), U(x₂,y₂)
Midpoint x
(2+8)/2 = 5
Midpoint y
(5+1)/2 = 3
Midpoint
M(5,3)
Step 1: Identify coordinates

T(2, 5) means x₁ = 2, y₁ = 5
U(8, 1) means x₂ = 8, y₂ = 1

Step 2: Apply midpoint formula

Midpoint = ((x₁ + x₂)/2, (y₁ + y₂)/2)

Midpoint = ((2 + 8)/2, (5 + 1)/2)

Step 3: Calculate x-coordinate

(x₁ + x₂)/2 = (2 + 8)/2 = 10/2 = 5

Step 4: Calculate y-coordinate

(y₁ + y₂)/2 = (5 + 1)/2 = 6/2 = 3

Step 5: Verify the result

Distance from T to M = √[(5-2)² + (3-5)²] = √[9 + 4] = √13
Distance from M to U = √[(8-5)² + (1-3)²] = √[9 + 4] = √13
Equal distances confirm M is the midpoint

Midpoint M = (5, 3)
Final answer:

The midpoint of the line segment connecting T(2,5) and U(8,1) is M(5,3).

Applied rules:

• Midpoint formula: Average of x-coordinates and y-coordinates

• Verification: Distance from midpoint to each endpoint should be equal

• Geometric meaning: Midpoint divides segment into two equal parts

Coordinate Grid Laws, Methods, Rules, and Definitions
\(M = \left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)\)
Midpoint Formula
Key definitions:

Coordinate plane: A two-dimensional surface formed by the intersection of two perpendicular number lines

Quadrants: Four regions created by the x and y axes, numbered counterclockwise

Ordered pair: A set of coordinates (x,y) that uniquely identifies a point on the plane

Distance: The straight-line measurement between two points

Midpoint: The point that divides a line segment into two equal parts

Complete methodology:
  1. Analyze the problem: Determine what needs to be found (plotting, distance, midpoint, etc.)
  2. Identify coordinates: Carefully read and record x and y values
  3. Apply the method: Choose the appropriate formula or procedure
  4. Calculate: Perform the mathematical operations step by step
  5. Verify: Check your work using alternative methods when possible
Tip 1: Always plot points in order: move horizontally first, then vertically.
Tip 2: Remember the quadrant signs: I(++), II(-+), III(--), IV(+-).
Tip 3: For horizontal lines, only x changes; for vertical lines, only y changes.
Tip 4: The midpoint is always the average of the coordinates of the endpoints.
Common errors: Confusing x and y coordinates, misreading negative signs, forgetting quadrant rules.
Key insights: Coordinate geometry connects algebra and geometry, allowing visual representation of mathematical relationships.
Essential formulas:

• Distance formula: \(d = \sqrt{(x_2-x_1)^2 + (y_2-y_1)^2}\)

• Midpoint formula: \(M = \left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)\)

• Horizontal distance: \(d = |x_2 - x_1|\) when \(y_1 = y_2\)

• Vertical distance: \(d = |y_2 - y_1|\) when \(x_1 = x_2\)

• Quadrant identification: Based on signs of x and y coordinates

Coordinate Grid Visualization: Geometric Applications
Exercise 6: Complex Shape Analysis
Consider the polygon with vertices at A(0, 0), B(4, 0), C(4, 3), D(2, 5), E(0, 3).
Plot these points, connect them in order, and analyze the resulting shape.

Analysis: The coordinate grid allows us to visualize geometric relationships and calculate properties.

  • This shape is an irregular pentagon with 5 sides
  • Distance calculations help determine side lengths
  • Coordinate systems enable precise geometric analysis

Questions & Answers

Question: I get confused about whether to move right or left when I see a negative x-coordinate. How can I remember which direction to go?

Answer: Great question! Think of the x-axis as a number line where 0 is in the middle:

  • Positive x-values (1, 2, 3...) are to the RIGHT of zero
  • Negative x-values (-1, -2, -3...) are to the LEFT of zero

A helpful memory trick: "Reading direction" - we read from left to right, just like we move from negative to positive on the x-axis. So positive means moving right (toward larger numbers), and negative means moving left (toward smaller numbers).

Example: Point (-3, 4) means: start at origin, move 3 units to the LEFT (because x is -3), then move 4 units UP (because y is positive 4).

Question: Why do we always put the x-coordinate first and then the y-coordinate? Could we switch the order?

Answer: The (x, y) order is a universal mathematical convention established centuries ago, and it's important for consistency:

  • Alphabetical order: X comes before Y in the alphabet
  • Input-Output relationship: In functions, x is the input and y is the output
  • Consistency: All mathematicians, scientists, and educators worldwide use the same convention

If we switched the order, it would cause massive confusion. For example, (3, 4) would mean something completely different than (4, 3). The point (3, 4) is 3 units right and 4 units up, while (4, 3) would be 4 units right and 3 units up - two different locations!

Think of it as "X comes first" or "X goes first" to help remember the order.

Question: How do I know if a point is on one of the axes? And what happens to the coordinates?

Answer: Points on the axes have special coordinate properties:

  • On the x-axis: The y-coordinate is always 0 (like (3, 0), (-2, 0), (0, 0))
  • On the y-axis: The x-coordinate is always 0 (like (0, 4), (0, -1), (0, 0))
  • At the origin: Both coordinates are 0 (0, 0)

To identify axis points:

  • If y = 0, the point is on the x-axis
  • If x = 0, the point is on the y-axis
  • Points on axes are NOT in any of the four quadrants

Example: Point (5, 0) is on the positive x-axis, Point (0, -3) is on the negative y-axis, and Point (0, 0) is the origin where both axes meet.

Question: How can I quickly identify which quadrant a point is in without plotting it?

Answer: You can identify quadrants by examining the signs of the coordinates:

  • Quadrant I: Both x and y are positive → (+, +)
  • Quadrant II: x is negative, y is positive → (-, +)
  • Quadrant III: Both x and y are negative → (-, -)
  • Quadrant IV: x is positive, y is negative → (+, -)

Memory trick: Think "All Students Take Calculus" (ASTC) in order of quadrants:

  • QI (All): Both sin and cos are positive
  • QII (Students): Only sin is positive
  • QIII (Take): Only tan is positive
  • QIV (Calculus): Only cos is positive

Quick examples:

  • (7, -2) → x positive, y negative → Quadrant IV
  • (-5, -3) → both negative → Quadrant III
  • (-1, 8) → x negative, y positive → Quadrant II

Question: When calculating distance between two points, why do we sometimes just subtract coordinates and other times use the distance formula?

Answer: The choice depends on the orientation of the line segment connecting the points:

  • Horizontal lines: Same y-coordinate → Distance = |x₂ - x₁|
  • Vertical lines: Same x-coordinate → Distance = |y₂ - y₁|
  • Diagonal lines: Different x and y coordinates → Use full distance formula

Examples:

  • Points (2, 3) and (7, 3): Same y-value (3), so horizontal distance = |7-2| = 5 units
  • Points (4, 1) and (4, 8): Same x-value (4), so vertical distance = |8-1| = 7 units
  • Points (1, 2) and (4, 6): Different x and y, so distance = √[(4-1)² + (6-2)²] = √[9+16] = √25 = 5 units

The general distance formula works for ALL cases, but the simpler methods save time when dealing with horizontal or vertical segments.