Converting Between Decimals, Fractions, and Percents - Complete Guide

Master converting between decimals, fractions, and percents with these 5 detailed exercises including definitions, methods, and visual examples.

Solution: Exercises 1 to 3
1 Decimal to Fraction
Exercise 1
Convert 0.75 to a fraction in simplest form.
Definition:

Decimal: A number expressed in base 10 with digits after the decimal point representing tenths, hundredths, thousandths, etc.

Fraction: A number representing a part of a whole, expressed as numerator/denominator.

Decimal to Fraction Method:
  1. Write the decimal as the numerator over a denominator of 1
  2. Count the decimal places and multiply both numerator and denominator by 10 for each place
  3. Simplify the fraction by dividing both numerator and denominator by their GCD
Original Decimal
0.75
Fraction Form
75/100
Simplified
3/4
Step 1: Count decimal places

0.75 has 2 decimal places (7 and 5)

Step 2: Write as fraction

0.75 = 75/100 (since 2 decimal places means divide by 100)

Step 3: Find GCD of 75 and 100

Factors of 75: 1, 3, 5, 15, 25, 75
Factors of 100: 1, 2, 4, 5, 10, 20, 25, 50, 100
GCD = 25

Step 4: Simplify by dividing by GCD

75 ÷ 25 = 3
100 ÷ 25 = 4
Therefore: 75/100 = 3/4

0.75 = 3/4
Final answer:

0.75 = 3/4

Applied rules:

• Decimal Places Rule: 2 decimal places = denominator of 100

• Simplification: Divide by greatest common divisor (GCD)

• Verification: Check by dividing numerator by denominator (3 ÷ 4 = 0.75)

Visual Representation

Circle divided into 4 equal parts

3 parts shaded = 3/4 = 0.75 = 75%

2 Fraction to Decimal
Exercise 2
Convert 5/8 to a decimal.
Definition:

Fraction to Decimal: Divide the numerator by the denominator to convert a fraction to its decimal equivalent.

Original Fraction
5/8
Division
5 ÷ 8
Decimal Result
0.625
Step 1: Set up division

Divide 5 by 8 (5 ÷ 8)

Step 2: Perform long division

5.000 ÷ 8 = 0.625
8 goes into 50 six times (48), remainder 2
8 goes into 20 two times (16), remainder 4
8 goes into 40 five times (40), remainder 0

Step 3: Write final answer

5/8 = 0.625

5/8 = 0.625
Final answer:

5/8 = 0.625

Applied rules:

• Division Rule: Numerator ÷ Denominator

• Long Division: Continue until remainder is 0 or pattern repeats

• Terminating vs Repeating: Some fractions produce terminating decimals (like this one), others produce repeating decimals

Visual Representation

Rectangle divided into 8 equal parts

5 parts shaded = 5/8 = 0.625 = 62.5%

3 Decimal to Percent
Exercise 3
Convert 0.36 to a percent.
Definition:

Percent: A ratio expressed as a fraction of 100, denoted by % symbol.

Original Decimal
0.36
Multiply by 100
0.36 × 100
Result
36%
Step 1: Multiply by 100

0.36 × 100 = 36

Step 2: Add percent symbol

36%

Step 3: Alternative method - move decimal

Move decimal point 2 places to the right: 0.36 → 36%

Step 4: Verification

36% = 36/100 = 0.36 ✓

0.36 = 36%
Final answer:

0.36 = 36%

Applied rules:

• Multiplication Rule: Multiply decimal by 100

• Decimal Movement: Move decimal point 2 places right

• Percent Symbol: Always add % symbol

Visual Representation

Grid of 100 squares

36 squares shaded = 36% = 0.36 = 36/100

Conversion Rules and Methods
Decimal ↔ Fraction ↔ Percent
Conversion Relationships
Decimal to Fraction
0.75 = 75/100 = 3/4
Count decimal places, divide by power of 10
Fraction to Decimal
3/4 = 3÷4 = 0.75
Divide numerator by denominator
Decimal to Percent
0.75 = 75%
Multiply by 100, add % symbol
Decimal to Fraction: Write decimal digits as numerator, denominator is 1 followed by zeros equal to decimal places, then simplify.
Fraction to Decimal: Divide numerator by denominator using long division.
Decimal to Percent: Move decimal point 2 places right and add % symbol.
Percent to Decimal: Move decimal point 2 places left and remove % symbol.
Common Conversions
Fraction Decimal Percent
1/2 0.5 50%
1/4 0.25 25%
3/4 0.75 75%
1/5 0.2 20%
1/10 0.1 10%
Solution: Exercises 4 to 5
4 Percent to Fraction
Exercise 4
Convert 60% to a fraction in simplest form.
Definition:

Percent to Fraction: Write the percent as a fraction over 100, then simplify.

Original Percent
60%
Write as Fraction
60/100
Simplified
3/5
Step 1: Remove percent symbol

60% becomes 60

Step 2: Write as fraction over 100

60/100

Step 3: Find GCD of 60 and 100

Factors of 60: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
Factors of 100: 1, 2, 4, 5, 10, 20, 25, 50, 100
GCD = 20

Step 4: Simplify by dividing by GCD

60 ÷ 20 = 3
100 ÷ 20 = 5
Therefore: 60/100 = 3/5

Step 5: Verify result

3/5 = 3 ÷ 5 = 0.6 = 60% ✓

60% = 3/5
Final answer:

60% = 3/5

Applied rules:

• Percent Rule: Remove % symbol, write over 100

• Simplification: Divide by greatest common divisor

• Verification: Convert back to check accuracy

Visual Representation

Circle divided into 5 equal parts

3 parts shaded = 3/5 = 0.6 = 60%

5 Mixed Conversion Problem
Exercise 5
Order these numbers from least to greatest: 0.45, 2/5, 42%, 0.5
Definition:

Comparing Different Forms: Convert all numbers to the same form (decimal) to compare them easily.

Numbers to Compare
0.45, 2/5, 42%, 0.5
Convert to Decimals
0.45, 0.4, 0.42, 0.5
Ordered
0.4, 0.42, 0.45, 0.5
Step 1: Convert all to decimals

0.45 = 0.45 (already decimal)

2/5 = 2 ÷ 5 = 0.4

42% = 42 ÷ 100 = 0.42

0.5 = 0.5 (already decimal)

Step 2: Compare decimals

0.4, 0.42, 0.45, 0.5

Step 3: Convert back to original forms

2/5, 42%, 0.45, 0.5

Step 4: Verify results

2/5 = 0.4, 42% = 0.42, 0.45 = 0.45, 0.5 = 0.5

2/5 < 42% < 0.45 < 0.5
Final answer:

From least to greatest: 2/5, 42%, 0.45, 0.5

Applied rules:

• Comparison Rule: Convert all numbers to same form before comparing

• Decimal Comparison: Compare digit by digit from left to right

• Verification: Always check conversions for accuracy

Number Line Visualization

0.4 (2/5) --- 0.42 (42%) --- 0.45 --- 0.5

All numbers plotted on number line from 0 to 1

Key Definitions, Methods, and Tips
Conversion Formulas
Essential Formulas
Key definitions:

Decimal: A number system based on 10, with digits after decimal point representing fractional parts.

Fraction: A number representing part of a whole (numerator/denominator).

Percent: A ratio expressed per hundred (parts per hundred).

Complete methodology:
  1. Identify the starting form: Determine if you have decimal, fraction, or percent.
  2. Identify the target form: Know what form you need to convert to.
  3. Apply the correct method: Use the appropriate conversion rule.
  4. Simplify if needed: Reduce fractions to lowest terms.
  5. Verify your answer: Convert back to check accuracy.
Tip 1: Remember that % means "per hundred" - always think of percent as "out of 100".
Tip 2: For mixed problems, convert everything to decimals first for easier comparison.
Tip 3: Memorize common conversions like 1/2=0.5=50%, 1/4=0.25=25%.
Tip 4: When simplifying fractions, find the GCD efficiently using prime factorization.
Common errors: Forgetting to move decimal point correctly, not simplifying fractions, misplacing decimal point when converting to percent.
Memory aids: "To PERCENT, move decimal RIGHT" (multiply by 100), "To DECIMAL, move LEFT" (divide by 100).
Conversion rules to remember:

• Decimal to Fraction: Write decimal digits as numerator, denominator is 10^n where n = decimal places

• Fraction to Decimal: Divide numerator by denominator

• Decimal to Percent: Multiply by 100 and add % symbol

• Percent to Decimal: Divide by 100 and remove % symbol

• Percent to Fraction: Write as number/100 and simplify

Visual Conversion Examples
Visual Representations
Understanding relationships through visual models
Fraction to Decimal to Percent

Visual representation showing how 3/4 = 0.75 = 75%

Circle divided into 4 parts, 3 shaded

Rectangle divided into 100 parts, 75 shaded

Key Insight: All three forms represent the same quantity, just in different ways!

  • Fractions show parts of a whole
  • Decimals show exact decimal values
  • Percents show ratios out of 100

Questions & Answers

Question: I'm confused about converting decimals with many places to fractions. How do I handle 0.125 or 0.625?

Answer: Great question! The key is counting decimal places:

  • For 0.125: There are 3 decimal places, so write as 125/1000
  • Then simplify by finding the GCD of 125 and 1000
  • 125 = 5³, 1000 = 10³ = (2×5)³ = 2³×5³
  • GCD = 5³ = 125
  • So 125/1000 = (125÷125)/(1000÷125) = 1/8

For 0.625: 3 decimal places = 625/1000

625 = 5⁴, 1000 = 2³×5³

GCD = 5³ = 125

625/1000 = (625÷125)/(1000÷125) = 5/8

Always count decimal places: 1 place = tenths (10), 2 places = hundredths (100), 3 places = thousandths (1000), etc.

Question: Why does 1/3 equal 0.333... and not exactly 0.33? It seems like the decimal goes on forever!

Answer: You've discovered an important concept! When dividing 1 by 3:

  • 1.000... ÷ 3
  • 3 goes into 10 three times with remainder 1
  • 3 goes into 10 three times with remainder 1 (again!)
  • This creates the repeating pattern: 0.333...

Some fractions produce terminating decimals (like 1/2 = 0.5, 1/4 = 0.25) while others produce repeating decimals (like 1/3 = 0.333..., 1/7 = 0.142857...).

This happens because 3 doesn't divide evenly into powers of 10. Only denominators that are factors of powers of 10 (like 2, 4, 5, 8, 10, 16, 20, etc.) produce terminating decimals.

For practical purposes, we often round repeating decimals: 1/3 ≈ 0.33 or 0.333.

Question: I have trouble remembering whether to multiply or divide when converting between decimals and percents. Any tips?

Answer: Here are memory tricks for decimal-percent conversions:

  • Decimal to Percent: Think "To PERCENT, move decimal RIGHT" (multiply by 100)
  • Example: 0.25 → move decimal 2 places right → 25%
  • Percent to Decimal: Think "To DECIMAL, move LEFT" (divide by 100)
  • Example: 75% → move decimal 2 places left → 0.75

Another way to think: Percent means "per hundred," so to get from decimal to percent, you're scaling up by 100. To go from percent to decimal, you're scaling down by 100.

You can also remember: "Percent is bigger" (has % symbol) so when going to percent, make the number bigger (multiply by 100).

Question: How do I know if I simplified a fraction correctly? Sometimes I'm not sure if it's in lowest terms.

Answer: A fraction is in lowest terms when the numerator and denominator have no common factors other than 1. Here's how to check:

  1. Find the GCD: Use the Euclidean algorithm or prime factorization to find the greatest common divisor
  2. Check divisibility: Try dividing both numerator and denominator by small primes (2, 3, 5, 7, 11...)
  3. Verify result: Once simplified, ensure the GCD of the new numerator and denominator is 1

Example: For 24/36

24 = 2³ × 3, 36 = 2² × 3²

GCD = 2² × 3 = 12

24÷12 = 2, 36÷12 = 3

GCD of 2 and 3 is 1, so 2/3 is fully simplified.

Quick check: Does 2 share any factors with 3? No, so it's simplified!

Question: What's the best strategy for comparing mixed forms like fractions, decimals, and percents?

Answer: The most reliable strategy is to convert everything to the same form. I recommend converting to decimals:

  1. Convert all to decimals: Fractions to decimals (divide), percents to decimals (divide by 100)
  2. Compare decimals: Look at tenths place first, then hundredths, then thousandths, etc.
  3. Order them: Put decimals in order from least to greatest
  4. Convert back: Express the answer in the original forms

Example: Comparing 3/4, 0.65, 70%

3/4 = 0.75, 0.65 = 0.65, 70% = 0.70

Order: 0.65 < 0.70 < 0.75

So: 0.65 < 70% < 3/4

This method works because decimals provide a direct numerical comparison!