Solved Exercises on Volume and Surface Area of 3D Figures in Grade 6

Master volume and surface area of 3D figures: rectangular prisms, cubes, cylinders with detailed explanations and visual examples.

Solution: Exercises 1 to 3
1 Rectangular prism volume
Exercise 1
Find the volume of a rectangular prism with length 6 cm, width 4 cm, and height 3 cm.
Definition:

Volume: The amount of space inside a 3D figure, measured in cubic units

Volume calculation method:
  1. Identify the dimensions of the 3D figure
  2. Apply the appropriate volume formula
  3. Substitute the known values
  4. Calculate and include cubic units
Length = 6 cm
Width = 4 cm
Height = 3 cm
Formula
V = lwh
Substitute
V = 6×4×3
Calculate
V = 72 cm³
Step 1: Identify the dimensions

Length (l) = 6 cm, Width (w) = 4 cm, Height (h) = 3 cm

Step 2: Apply the volume formula

For a rectangular prism: V = l × w × h

Step 3: Substitute the values

V = 6 × 4 × 3 = 72

Step 4: Include units

V = 72 cm³ (cubic centimeters)

Volume = 72 cm³
Final answer:

The volume of the rectangular prism is 72 cubic centimeters.

Applied rules:

• Rectangular prism volume: V = lwh

• Cubic units: Volume is always in cubic units (cm³, m³, etc.)

• Verification: Length × width × height gives volume

2 Cube surface area
Exercise 2
Find the surface area of a cube with side length 5 cm.
Definition:

Surface area: The total area of all faces of a 3D figure

Side = 5 cm
Formula
SA = 6s²
Substitute
SA = 6(5²)
Calculate
SA = 150 cm²
Step 1: Identify the side length

Side length (s) = 5 cm

Step 2: Apply the surface area formula

For a cube: SA = 6s² (6 faces, each with area s²)

Step 3: Substitute the values

SA = 6 × 5² = 6 × 25 = 150

Step 4: Include units

SA = 150 cm² (square centimeters)

Surface Area = 150 cm²
Final answer:

The surface area of the cube is 150 square centimeters.

Applied rules:

• Cube surface area: SA = 6s²

• Square units: Surface area is in square units

• 6 faces: A cube has 6 identical square faces

3 Cylinder volume
Exercise 3
Find the volume of a cylinder with radius 3 cm and height 7 cm. (Use π ≈ 3.14)
Definition:

Cylinder volume: The space inside a cylinder: V = πr²h

Height = 7 cm
Radius = 3 cm
Formula
V = πr²h
Substitute
V = π(3²)(7)
Calculate
V ≈ 197.82 cm³
Step 1: Identify the dimensions

Radius (r) = 3 cm, Height (h) = 7 cm

Step 2: Apply the volume formula

For a cylinder: V = πr²h

Step 3: Substitute the values

V = π × 3² × 7 = π × 9 × 7 = 63π

Step 4: Calculate with π ≈ 3.14

V = 63 × 3.14 ≈ 197.82

Volume ≈ 197.82 cm³
Final answer:

The volume of the cylinder is approximately 197.82 cubic centimeters.

Applied rules:

• Cylinder volume: V = πr²h

• Area of base: πr² (circular base)

• Height: Multiplies base area by height

Volume and Surface Area: Rules and Methods
\(\text{Cube: } V = s^3, SA = 6s^2\)
Cube Formulas
Rectangular Prism
V = lwh, SA = 2(lw+lh+wh)
6 rectangular faces
Cube
V = s³, SA = 6s²
6 square faces
Cylinder
V = πr²h, SA = 2πr(h+r)
Curved surface + 2 circular bases
Key definitions:

Volume: The amount of space inside a 3D figure (measured in cubic units)

Surface area: The total area of all surfaces of a 3D figure (measured in square units)

Face: A flat surface of a 3D figure

Edge: Where two faces meet

Calculation methodology:
  1. Identify: Determine the 3D figure and its dimensions
  2. Select: Choose the appropriate volume or surface area formula
  3. Substitute: Replace variables with known values
  4. Calculate: Perform the arithmetic operations
  5. Verify: Check units and reasonableness of answer
Tip 1: Always include units in your final answer.
Tip 2: Volume is in cubic units (cm³, m³), surface area is in square units (cm², m²).
Tip 3: For surface area, count all faces of the 3D figure.
Tip 4: Draw a net to visualize all faces for surface area calculations.
Common errors: Forgetting units, mixing up formulas, calculation mistakes with π.
Memory aid: "Volume fills the inside, surface covers the outside".
Essential formulas:

• Rectangular prism: V = lwh, SA = 2(lw + lh + wh)

• Cube: V = s³, SA = 6s²

• Cylinder: V = πr²h, SA = 2πr(h + r)

• Volume: Always cubic units

• Surface area: Always square units

Solution: Exercises 4 to 5
4 Rectangular prism surface area
Exercise 4
Find the surface area of a rectangular prism with length 8 cm, width 5 cm, and height 4 cm.
Definition:

Rectangular prism surface area: The sum of areas of all 6 rectangular faces

Length = 8 cm
Width = 5 cm
Height = 4 cm
Formula
SA = 2(lw+lh+wh)
Substitute
SA = 2(8×5+8×4+5×4)
Calculate
SA = 2(40+32+20) = 184 cm²
Step 1: Identify the dimensions

Length (l) = 8 cm, Width (w) = 5 cm, Height (h) = 4 cm

Step 2: Apply the surface area formula

For a rectangular prism: SA = 2(lw + lh + wh)

Step 3: Substitute the values

SA = 2(8×5 + 8×4 + 5×4) = 2(40 + 32 + 20) = 2(92) = 184

Step 4: Include units

SA = 184 cm² (square centimeters)

Surface Area = 184 cm²
Final answer:

The surface area of the rectangular prism is 184 square centimeters.

Applied rules:

• Rectangular prism SA: SA = 2(lw + lh + wh)

• 6 faces: Top/bottom, front/back, left/right

• Square units: Surface area in square units

5 Cube volume
Exercise 5
Find the volume of a cube with side length 7 inches.
Definition:

Cube volume: The space inside a cube: V = s³

Side = 7 in
Formula
V = s³
Substitute
V = 7³
Calculate
V = 343 in³
Step 1: Identify the side length

Side length (s) = 7 inches

Step 2: Apply the volume formula

For a cube: V = s³

Step 3: Substitute the value

V = 7³ = 7 × 7 × 7 = 343

Step 4: Include units

V = 343 in³ (cubic inches)

Volume = 343 in³
Final answer:

The volume of the cube is 343 cubic inches.

Applied rules:

• Cube volume: V = s³

• Equal sides: All edges are the same length

• Cubic units: Volume in cubic units

Comprehensive Guide: Volume and Surface Area of 3D Figures
\(\text{Cylinder: } SA = 2\pi r(h+r)\)
Cylinder Surface Area
Key definitions:

3D Figure: A shape that has length, width, and height

Volume: The amount of space occupied by a 3D figure

Surface Area: The total area of all surfaces of a 3D figure

Complete calculation methodology:
  1. Identify the 3D figure: Determine what type of shape you're working with
  2. Measure dimensions: Identify all necessary measurements
  3. Select formula: Choose the correct formula for the calculation
  4. Substitute values: Replace variables with actual measurements
  5. Calculate: Perform the mathematical operations
  6. Verify: Check your answer for reasonableness and correct units
Tip 1: Always write down the formula before substituting values.
Tip 2: Draw a net to visualize all faces when calculating surface area.
Tip 3: Volume is always in cubic units (cm³, m³, etc.).
Tip 4: Surface area is always in square units (cm², m², etc.).
Common errors: Confusing volume and surface area formulas, calculation mistakes with π, incorrect units.
Practice focus: Start with cubes and rectangular prisms before moving to cylinders.
Essential calculation rules:

• Rectangular prism: V = lwh, SA = 2(lw + lh + wh)

• Cube: V = s³, SA = 6s²

• Cylinder: V = πr²h, SA = 2πr(h + r)

• Volume: Cubic units

• Surface area: Square units

• Always include units in final answers

3D Figures Comparison: Volume vs Surface Area
Exercise 6: 3D Figure Relationships
Compare volume and surface area for different 3D figures:
Cube: side = 3 cm → V=27 cm³, SA=54 cm²
Rectangular prism: 2×3×4 cm → V=24 cm³, SA=52 cm²
Cylinder: r=2 cm, h=3 cm → V≈37.7 cm³, SA≈62.8 cm²

Relationships: The chart shows how different 3D figures compare in volume and surface area.

  • For the same general size, different shapes have different volumes and surface areas
  • Volume measures internal space, surface area measures external covering
  • Understanding these relationships helps in real-world applications
  • Efficiency considerations: maximizing volume while minimizing surface area

Questions & Answers

Question: I don't understand the difference between volume and surface area. They sound like the same thing!

Answer: They're very different concepts!

Volume: Think of it as filling the inside of a shape with water or sand. It measures the space inside a 3D figure.

Surface Area: Think of it as wrapping the outside of a shape with paper or paint. It measures all the faces on the outside.

Example: A cardboard box has volume (how much you can fit inside) and surface area (how much cardboard was needed to make the box).

Volume uses cubic units (cm³), surface area uses square units (cm²).

Question: How do I remember which formula to use for surface area? There are so many!

Answer: Focus on what the shape looks like and count the faces!

Cube: 6 identical square faces → SA = 6s²

Rectangular Prism: 6 rectangular faces in 3 pairs → SA = 2(lw + lh + wh)

Cylinder: 2 circular bases + 1 rectangular side → SA = 2πr² + 2πrh = 2πr(r+h)

Think of it as adding up the area of each face. Draw a net (unfolded version) to see all faces clearly!

Practice with physical models if possible - seeing the shapes helps cement the formulas in your mind.

Question: What's π (pi) and why do we use it in cylinder formulas? It seems so complicated!

Answer: Pi (π) is a special number that relates circles to their diameters!

π = approximately 3.14159..., and it's the ratio of a circle's circumference to its diameter.

We use π in cylinder formulas because:

  • The top and bottom of a cylinder are circles
  • The area of a circle is πr²
  • The curved surface is related to the circumference of the circle

For calculations, use π ≈ 3.14 unless told otherwise. Just treat it like any other number in your calculations!

Example: If r = 3, then πr² = 3.14 × 3² = 3.14 × 9 = 28.26

Question: Why do we need to learn about 3D figures? When will I ever use this in real life?

Answer: 3D figure calculations are used everywhere in real life!

  • Construction: Calculating concrete needed for foundations, paint for walls
  • Manufacturing: Designing containers, packaging materials
  • Shipping: Determining box sizes and shipping costs
  • Cooking: Measuring ingredients in cylindrical containers
  • Swimming pools: Calculating water volume and tile surface area

Understanding 3D figures helps you solve practical problems and make accurate estimates in many careers!

Question: How can I check if my answer makes sense? Sometimes I get really big or small numbers!

Answer: Always estimate first! Before calculating:

  1. Look at dimensions: Are they reasonable for the object?
  2. Make a rough estimate: Round numbers and multiply mentally
  3. Check units: Volume should be cubic, surface area should be square
  4. Compare: Does your answer match your estimate?

Example: If calculating volume of a small box, answer shouldn't be in thousands of cubic meters!

Also, double-check your calculations step by step if the answer seems off.