Comparison: Determining the relationship between two numbers using symbols (<, >, =).
- Convert both numbers to the same form (either fractions or decimals)
- Compare the values using place value or equivalent fractions
- Use comparison symbols: < (less than), > (greater than), = (equal)
\(\frac{3}{4} = 3 \div 4 = 0.75\)
Compare 0.75 and 0.70
0.75 has 7 tenths and 5 hundredths
0.70 has 7 tenths and 0 hundredths
Since 5 hundredths > 0 hundredths, 0.75 > 0.70
\(\frac{3}{4} > 0.7\)
0.75 > 0.7 ✓
\(\frac{3}{4}\) is greater than 0.7.
• Conversion: Convert to same form for comparison
• Decimal comparison: Compare place by place from left to right
• Verification: Check that the conversion was accurate
Equivalent forms: Different representations of the same value (e.g., 0.5 = \(\frac{1}{2}\)).
\(\frac{1}{2} = 1 \div 2 = 0.5\)
0.5 and 0.5 are the same
\(\frac{1}{2} = 0.5\)
\(\frac{1}{2} = \frac{5}{10} = 0.5\) ✓
Yes, \(\frac{1}{2}\) and 0.5 are equal.
• Equivalence: \(\frac{1}{2} = \frac{5}{10} = 0.5\)
• Conversion: Divide numerator by denominator
• Verification: Check using equivalent fractions
Terminating vs repeating decimals: Some fractions result in terminating decimals, others in repeating decimals.
\(\frac{1}{3} = 1 \div 3 = 0.333...\) (repeating)
0.3 vs 0.333...
0.3 = 0.300...
0.333... has 3 in the hundredths place, 0.300... has 0 in the hundredths place
Since 3 > 0, 0.333... > 0.300...
\(\frac{1}{3} > 0.3\)
Convert to equivalent fractions: \(\frac{1}{3}\) vs \(\frac{3}{10}\)
Common denominator: \(\frac{10}{30}\) vs \(\frac{9}{30}\)
Since \(\frac{10}{30} > \frac{9}{30}\), \(\frac{1}{3} > 0.3\) ✓
\(\frac{1}{3}\) is greater than 0.3.
• Repeating decimals: \(\frac{1}{3} = 0.\overline{3}\)
• Decimal comparison: Compare place by place
• Verification: Use equivalent fractions for confirmation
Fraction: A number expressed as a ratio of two integers, written as \(\frac{a}{b}\) where b ≠ 0.
Decimal: A number system based on 10, with digits to the right of a decimal point.
Terminating decimal: A decimal that ends after a finite number of digits (e.g., 0.5, 0.75).
Repeating decimal: A decimal with a pattern that repeats infinitely (e.g., 0.333..., 0.1666...).
Equivalent forms: Different representations of the same value.
- Identify the numbers: Recognize which are fractions and which are decimals
- Choose conversion method: Decide whether to convert to decimals or fractions
- Perform conversions: Accurately convert one or both numbers
- Compare values: Use appropriate comparison method
- State the relationship: Use correct comparison symbols (<, >, =)
- Verify: Check that the conversion was accurate
Ascending order: Arranging numbers from smallest to largest.
\(\frac{2}{3} = 0.666...\)
0.65 = 0.65
\(\frac{3}{5} = 0.6\)
0.7 = 0.7
0.6 has 6 tenths
0.65 has 6 tenths
0.666... has 6 tenths
0.7 has 7 tenths
0.6 = 0.60
0.65 = 0.65
0.666... has 6 hundredths
So: 0.60 < 0.65 < 0.666...
0.6 < 0.65 < 0.666... < 0.7
So: \(\frac{3}{5} < 0.65 < \frac{2}{3} < 0.7\)
\(\frac{3}{5} = 0.6\), \(0.65 = 0.65\), \(\frac{2}{3} = 0.666...\), \(0.7 = 0.7\) ✓
The numbers ordered from least to greatest are: \(\frac{3}{5}\), 0.65, \(\frac{2}{3}\), 0.7.
• Common form: Convert all to decimals for comparison
• Place value: Compare digits from left to right
• Verification: Ensure all conversions are accurate
Terminating decimal: A decimal that ends after a finite number of digits.
\(\frac{7}{8} = 7 \div 8 = 0.875\)
0.875 and 0.875 are identical
\(\frac{7}{8} = 0.875\)
Check: \(0.875 \times 8 = 7\) ✓
Convert 0.875 to fraction: \(\frac{875}{1000} = \frac{7}{8}\) ✓
Yes, \(\frac{7}{8}\) and 0.875 are equal.
• Terminating decimal: \(\frac{7}{8} = 0.875\) (ends after 3 digits)
• Conversion: Divide numerator by denominator
• Verification: Multiply decimal by denominator to get numerator
Comparison: The process of determining the relationship between two or more numbers using inequality symbols.
Place value: The value of a digit based on its position in a number (tenths, hundredths, thousandths, etc.).
Common denominator: A shared denominator used to compare fractions directly.
Equivalent ratios: Different forms that represent the same value.
Ordering: Arranging numbers in ascending or descending sequence.
- Analyze the numbers: Identify fractions and decimals to be compared
- Choose conversion method: Select the most convenient common form
- Convert systematically: Accurately convert each number to the chosen form
- Compare using place value: For decimals, compare digit by digit from left to right
- For fractions: Find common denominators or convert to decimals
- State the relationship: Use appropriate comparison symbols (<, >, =)
• Convert to same form before comparing
• For decimals: compare place value from left to right
• For fractions: find common denominator or convert to decimals
• Cross-multiplication: \(\frac{a}{b} > \frac{c}{d}\) if a×d > b×c
• Terminating decimals: finite number of digits after decimal point
• Repeating decimals: infinite repeating pattern after decimal point
0.1 = 1 tenth = 1/10
0.01 = 1 hundredth = 1/100
0.001 = 1 thousandth = 1/1000
| Decimal | Place Value | Fraction | Percent |
|---|---|---|---|
| 0.1 | Tenths | 1/10 | 10% |
| 0.01 | Hundredths | 1/100 | 1% |
| 0.001 | Thousandths | 1/1000 | 0.1% |
| 0.0001 | Ten-thousandths | 1/10000 | 0.01% |
Analysis: Each decimal place represents a power of 10 in the denominator when converted to a fraction.
- Pattern: The number of decimal places determines the denominator (10, 100, 1000, etc.)
- Conversion: Decimal to fraction → decimal places = zeros in denominator
- Comparison: More decimal places allow for more precise comparison