Solved Exercises on Area of Rectangles, Triangles, and Composite Figures in Grade 6

Master area calculations: rectangles, triangles, and composite figures through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Rectangle Area
Exercise 1
Find the area of a rectangle with length 8 cm and width 5 cm.
Definition:

Area: The amount of space inside a two-dimensional shape

Rectangle: A four-sided polygon with four right angles

Solution method:
  1. Identify the length and width
  2. Apply the area formula: Area = length × width
  3. Perform the multiplication
  4. Include units in the answer (square units)
  5. Verify the calculation
Length
8 cm
Width
5 cm
Area
40 cm²
RECTANGLE
8 cm 5 cm
Length = 8 cm, Width = 5 cm
A = l × w
A = 8 × 5
40 cm²
Step 1: Identify the dimensions

Length = 8 cm

Width = 5 cm

Step 2: Apply the formula

Area of rectangle = length × width

A = l × w

Step 3: Substitute values

A = 8 × 5

Step 4: Calculate

A = 40 square centimeters

Step 5: Include units

Area = 40 cm²

Final answer:

The area is 40 cm².

Applied rules:

• Rectangle area: A = l × w

• Square units: Area is always expressed in square units

• Dimensions: Length and width must be in the same units

2 Triangle Area
Exercise 2
Find the area of a triangle with base 12 inches and height 7 inches.
Definition:

Triangle: A three-sided polygon

Base: The side of the triangle used as the reference for height

Height: The perpendicular distance from the base to the opposite vertex

Base
12 in
Height
7 in
Area
42 in²
TRIANGLE
7 in 12 in
Base = 12 in, Height = 7 in
A = ½ × b × h
A = ½ × 12 × 7
42 in²
Step 1: Identify the base and height

Base = 12 inches

Height = 7 inches

Step 2: Apply the formula

Area of triangle = ½ × base × height

A = ½ × b × h

Step 3: Substitute values

A = ½ × 12 × 7

Step 4: Calculate

A = ½ × 84

A = 42 square inches

Step 5: Include units

Area = 42 in²

Final answer:

The area is 42 in².

Applied rules:

• Triangle area: A = ½bh

• Height: Must be perpendicular to the base

• Square units: Area is always expressed in square units

3 Square Area
Exercise 3
Find the area of a square with side length 6 meters.
Definition:

Square: A rectangle with all sides equal

Special case: A rectangle where length = width

Side length
6 m
Area formula
s²
Area
36 m²
SQUARE
6 m 6 m
Side length = 6 m
A = s²
A = 6²
36 m²
Step 1: Identify the side length

Side length = 6 meters

Step 2: Apply the formula

Area of square = side × side = side²

A = s²

Step 3: Substitute value

A = 6²

Step 4: Calculate

A = 6 × 6 = 36 square meters

Step 5: Include units

Area = 36 m²

Final answer:

The area is 36 m².

Applied rules:

• Square area: A = s²

• Special case: Square is a rectangle with equal sides

• Square units: Area is always expressed in square units

Rules and methods, laws,...
\(A = l \times w\)
Rectangle Area Formula
Rectangle
\(A = l \times w\)
Length × Width
Square
\(A = s^2\)
Side squared
Triangle
\(A = \frac{1}{2} \times b \times h\)
½ Base × Height
Parallelogram
\(A = b \times h\)
Base × Height
Key definitions:

Area: The amount of surface covered by a two-dimensional shape

Square units: Units used to measure area (cm², m², in², ft², etc.)

Base: The side of a triangle or parallelogram used as reference for height

Height: The perpendicular distance from the base to the opposite side or vertex

Composite figure: A shape made up of two or more simple geometric figures

Decomposition: Breaking a complex shape into simpler shapes

Complete methodology:
  1. Identify the shape(s): Determine what type of shape you're working with
  2. Identify dimensions: Find all necessary measurements (length, width, base, height)
  3. Select appropriate formula: Use the correct area formula for the shape
  4. Substitute values: Replace variables in the formula with actual measurements
  5. Calculate: Perform the arithmetic operations
  6. Include units: Always express the answer in square units
  7. Verify: Check that your answer makes sense
Tip 1: Always use the perpendicular height for triangles and parallelograms.
Tip 2: For composite figures, break them into rectangles, triangles, or other simple shapes.
Tip 3: Area is always expressed in square units (cm², m², in², etc.).
Tip 4: For squares, use A = s² since length = width.
Common errors: Forgetting to include units, using slanted height instead of perpendicular height, confusing area with perimeter.
Key principle: Area measures the space inside a shape, while perimeter measures the distance around.
Formulas to know by heart:

• Rectangle: A = l × w

• Square: A = s²

• Triangle: A = ½bh

• Parallelogram: A = bh

• Trapezoid: A = ½(b₁ + b₂)h

• Always include square units in your final answer

Solution: Exercises 4 to 5
4 Composite Figure Area
Exercise 4
Find the area of a figure composed of a rectangle with length 10 cm and width 4 cm, and a triangle with base 10 cm and height 6 cm, attached to the top of the rectangle.
Definition:

Composite figure: A shape made up of two or more simple geometric figures

Rectangle area
40 cm²
Triangle area
30 cm²
Total area
70 cm²
COMPOSITE FIGURE
10 cm 4 cm 6 cm
Rectangle: 10×4 cm, Triangle: base=10 cm, height=6 cm
Rectangle: A = 10 × 4 = 40 cm²
Triangle: A = ½ × 10 × 6 = 30 cm²
Total: 40 + 30 = 70 cm²
Step 1: Break the figure into simple shapes

Rectangle: length = 10 cm, width = 4 cm

Triangle: base = 10 cm, height = 6 cm

Step 2: Calculate rectangle area

A = l × w = 10 × 4 = 40 cm²

Step 3: Calculate triangle area

A = ½ × b × h = ½ × 10 × 6 = 30 cm²

Step 4: Add the areas together

Total area = 40 + 30 = 70 cm²

Step 5: Include units

Area = 70 cm²

Final answer:

The area is 70 cm².

Applied rules:

• Composite figures: Break into simple shapes and add areas

• Rectangle area: A = l × w

• Triangle area: A = ½bh

5 Subtraction Method
Exercise 5
Find the area of a rectangular piece of paper that is 12 cm by 8 cm, with a square hole of 3 cm by 3 cm cut out of the center.
Definition:

Subtraction method: Finding area by subtracting the area of unwanted parts

Large rectangle
96 cm²
Square hole
9 cm²
Remaining area
87 cm²
RECTANGLE WITH HOLE
12 cm 8 cm 3 cm 3 cm
Large: 12×8 cm, Hole: 3×3 cm
Large rectangle: A = 12 × 8 = 96 cm²
Square hole: A = 3² = 9 cm²
Remaining: 96 - 9 = 87 cm²
Step 1: Calculate the area of the large rectangle

A = l × w = 12 × 8 = 96 cm²

Step 2: Calculate the area of the square hole

A = s² = 3² = 9 cm²

Step 3: Subtract the hole's area from the large rectangle

Remaining area = 96 - 9 = 87 cm²

Step 4: Include units

Area = 87 cm²

Final answer:

The remaining area is 87 cm².

Applied rules:

• Subtraction method: Area of whole - Area of cut-out = Remaining area

• Rectangle area: A = l × w

• Square area: A = s²

Complete Guide: Laws, Methods, Rules, Definitions, Expressions
\(A = \text{sum of individual areas}\)
Area of Composite Figures
Key definitions:

Area: The measure of the surface enclosed by a two-dimensional shape

Square units: Units used to measure area (cm², m², in², ft², etc.)

Base: The side of a triangle or parallelogram used as reference for height measurement

Height: The perpendicular distance from the base to the opposite vertex or side

Composite figure: A geometric figure composed of two or more simple shapes

Decomposition: The process of breaking a complex shape into simpler shapes

Subtraction method: Finding area by subtracting unwanted portions from the total area

Complete methodology:
  1. Identify the figure type: Determine if it's a rectangle, triangle, or composite figure
  2. Identify all dimensions: Measure or identify all necessary lengths and heights
  3. Choose appropriate method: Use decomposition for composite figures, subtraction for figures with holes
  4. Select correct formulas: Apply the appropriate area formula for each shape
  5. Calculate individual areas: Find the area of each simple shape
  6. Combine areas: Add areas for composite figures, subtract for figures with cutouts
  7. Include units: Always express the final answer in square units
  8. Verify: Check that the answer makes sense in the context of the problem
Tip 1: For composite figures, draw lines to separate the shape into rectangles and triangles.
Tip 2: Always use perpendicular height for triangles and parallelograms.
Tip 3: For figures with holes, calculate the whole area first, then subtract the hole's area.
Tip 4: Make sure all dimensions are in the same units before calculating.
Tip 5: Area is always expressed in square units (cm², m², in², ft², etc.).
Common contexts: Flooring, painting, carpeting, gardening, construction, crafts.
Real-world applications: Calculating material needed for projects, determining property size, architectural planning.
Common mistakes: Forgetting to use perpendicular height, mixing units, confusing area with perimeter.
Essential rules and formulas:

• Rectangle: A = l × w

• Square: A = s²

• Triangle: A = ½bh

• Parallelogram: A = bh

• Trapezoid: A = ½(b₁ + b₂)h

• Composite figures: Add individual areas

• Figures with holes: Subtract hole area from total area

• Always include square units in the final answer

Questions & Answers

Question: Why do we use ½ in the triangle area formula? Where does it come from?

Answer: The ½ comes from the relationship between triangles and rectangles!

Imagine a rectangle with the same base and height as your triangle. If you cut this rectangle diagonally, you get two identical triangles. Each triangle has half the area of the original rectangle.

So if a rectangle has area = base × height, then a triangle with the same base and height has area = ½ × base × height.

This is why: Area of rectangle = bh, Area of triangle = ½bh.

Question: What's the difference between area and perimeter? I keep mixing them up.

Answer: Here's how to remember:

  • Perimeter: Distance around the outside of a shape (like walking around a fence)
  • Area: Space inside a shape (like the grass inside a fenced yard)

Think of it this way: Perimeter is "around" (perimeter starts with "per"), Area is "inside" (area sounds like "are there" - are there spaces inside?).

Units:

  • Perimeter: linear units (cm, m, inches, feet)
  • Area: square units (cm², m², in², ft²)

Question: How do I know which side is the base of a triangle when calculating area?

Answer: Any side of a triangle can be the base! The key is that the height must be measured perpendicular to that chosen base.

Whichever side you choose as the base, the height is the perpendicular distance from that base to the opposite vertex.

You can pick the base that makes the problem easiest:

  • The side that's horizontal if the triangle is drawn that way
  • The side whose corresponding height is easiest to measure
  • The side that's mentioned in the problem

No matter which side you choose as the base, you'll get the same area!