Area of Rectangles, Triangles, and Parallelograms - Detailed Exercises and Solutions

Master area calculations: rectangles, triangles, and parallelograms with these 3 detailed exercises and visual aids.

Solution: Exercises 1 to 3
1 Rectangle Area
Exercise 1
Find the area of a rectangle with length 8 cm and width 5 cm.
Definition:

Rectangle: A four-sided figure with four right angles and opposite sides equal.

Area: The amount of space inside a two-dimensional shape, measured in square units.

Rectangle Area Method:
  1. Identify the length and width of the rectangle
  2. Apply the formula: Area = length × width
  3. Calculate the result
  4. Include the appropriate square units
Given
Length = 8 cm, Width = 5 cm
Formula
A = l × w
Substitute
A = 8 × 5
Result
40 cm²
Step 1: Identify the dimensions

Length = 8 cm, Width = 5 cm

Step 2: Apply the rectangle area formula

Area = length × width = 8 cm × 5 cm

Step 3: Calculate

8 × 5 = 40

Step 4: Include units

Area = 40 square centimeters (cm²)

40 cm²
Final answer:

The area of the rectangle is 40 square centimeters.

Applied rules:

• Rectangle Area Formula: A = l × w

• Unit Squaring: When multiplying lengths, square the units

• Dimension Requirement: Length and width must be perpendicular

Key Tip: Always multiply length by width for rectangles!
Common Mistake: Forgetting to include square units in the answer.
2 Triangle Area
Exercise 2
Find the area of a triangle with base 12 inches and height 7 inches.
Definition:

Triangle: A three-sided polygon with three angles that sum to 180 degrees.

Height (altitude): The perpendicular distance from the base to the opposite vertex.

Given
Base = 12 in, Height = 7 in
Formula
A = ½bh
Substitute
A = ½(12)(7)
Result
42 in²
Step 1: Identify the base and height

Base = 12 inches, Height = 7 inches

Step 2: Apply the triangle area formula

Area = ½ × base × height = ½ × 12 × 7

Step 3: Calculate

½ × 12 × 7 = 6 × 7 = 42

Step 4: Include units

Area = 42 square inches (in²)

42 in²
Final answer:

The area of the triangle is 42 square inches.

Applied rules:

• Triangle Area Formula: A = ½bh

• Perpendicular Height: Height must be perpendicular to the base

• Half of Rectangle: A triangle is half of a rectangle with the same base and height

Key Tip: Remember the ½ in the triangle area formula!
Common Mistake: Using the slanted side instead of the perpendicular height.
3 Parallelogram Area
Exercise 3
Find the area of a parallelogram with base 10 meters and height 6 meters.
Definition:

Parallelogram: A four-sided figure with opposite sides parallel and equal in length.

Base and Height: The base is any side, and the height is the perpendicular distance to the opposite side.

Given
Base = 10 m, Height = 6 m
Formula
A = bh
Substitute
A = 10 × 6
Result
60 m²
Step 1: Identify the base and height

Base = 10 meters, Height = 6 meters

Step 2: Apply the parallelogram area formula

Area = base × height = 10 × 6

Step 3: Calculate

10 × 6 = 60

Step 4: Include units

Area = 60 square meters (m²)

60 m²
Final answer:

The area of the parallelogram is 60 square meters.

Applied rules:

• Parallelogram Area Formula: A = bh

• Same as Rectangle: Parallelogram area is the same as a rectangle with same base and height

• Perpendicular Height: Height must be perpendicular to the base

Key Tip: Parallelograms have the same area as rectangles with the same base and height!
Common Mistake: Using the slanted side length instead of the perpendicular height.
Visual Infographic: Area Formulas
Area Calculation Guide
1
Identify Shape
→
2
Measure
→
3
Apply Formula
→
4
Include Units
⬜
Rectangle
A = l × w
🔺
Triangle
A = ½bh
▰
Parallelogram
A = bh
📏
Base
Any side
📐
Height
Perpendicular
²
Square Units
cm², in², m²
\(A_{rectangle} = l \times w\)
Rectangle Area
Key Point: Area measures the space inside a shape, expressed in square units.
Memory Aid: "Base times height" works for rectangles and parallelograms.
Detailed Summary: Area of Rectangles, Triangles, and Parallelograms
Complete Learning Summary

Definitions:

Area: The amount of space inside a two-dimensional shape, measured in square units.

Rectangle: A quadrilateral with four right angles and opposite sides equal.

Triangle: A three-sided polygon with interior angles summing to 180°.

Parallelogram: A quadrilateral with opposite sides parallel and equal.

Base: The side of a shape used as a reference for measuring height.

Height: The perpendicular distance from the base to the highest point of the shape.

Core Rules and Principles:

• Perpendicular Requirement: Height must always be perpendicular to the base.

• Unit Squaring: Area is always expressed in square units (cm², in², m²).

• Rectangle Formula: A = l × w

• Triangle Formula: A = ½bh

• Parallelogram Formula: A = bh

Step-by-Step Method:

1. Identify the shape: Determine if it's a rectangle, triangle, or parallelogram.

2. Measure dimensions: Find the base and height (or length and width for rectangles).

3. Select the formula: Use the appropriate area formula for the shape.

4. Substitute values: Plug the measurements into the formula.

5. Calculate: Perform the arithmetic operations.

6. Include units: Express the answer in square units.

Examples:

Rectangle: A = l × w = 5 × 3 = 15 cm²

Triangle: A = ½bh = ½(8)(6) = 24 in²

Parallelogram: A = bh = 10 × 4 = 40 m²

Advanced: Composite shapes made of multiple basic shapes.

Application: Finding areas of rooms, gardens, or other real-world spaces.

Tips and Tricks:

• Visualize: Draw the shape and label dimensions to avoid confusion.

• Perpendicular Check: Ensure the height measurement is perpendicular to the base.

• Unit Consistency: Make sure all measurements are in the same units before calculating.

• Triangle Memory: Remember the ½ in the triangle area formula!

Common Pitfalls:

• Using the wrong side as height in triangles and parallelograms.

• Forgetting to include square units in the final answer.

• Confusing the ½ in the triangle formula with other shapes.

• Mixing different units of measurement.

Key Takeaways:

• The height must be perpendicular to the base for accurate area calculation.

• Area formulas are based on the fundamental concept of covering space.

• Triangle area is half that of a rectangle with the same base and height.

• Parallelograms have the same area as rectangles with the same base and height.

Key Concepts:

Base: The side used as a reference for height measurement.

Height: The shortest distance from the base to the opposite side/vertex.

Perpendicular: At a 90° angle to the base.

Square Units: Area is always measured in square units.

Advanced Techniques:
  1. Breaking complex shapes: Divide into rectangles, triangles, and parallelograms.
  2. Using diagonals: For some shapes, diagonal measurements can help find area.
  3. Unit conversion: Converting between different square units when necessary.
Pro Tip: When finding the height of a triangle, imagine dropping a perpendicular line from the vertex to the base.
Memory Device: "Area is base times height" (with ½ for triangles).
Critical Success Factors:

• Correctly identifying base and perpendicular height

• Using the appropriate formula for each shape

• Including proper square units in the answer

• Ensuring all measurements are in the same units

Questions & Answers

Question: Why is the triangle area formula A = ½bh instead of just A = bh like rectangles?

Answer: The ½ in the triangle area formula comes from the geometric relationship between triangles and rectangles.

Imagine taking a rectangle and drawing a diagonal line from one corner to the opposite corner. This divides the rectangle into two equal triangles.

Since the rectangle has area = length × width (or base × height), each triangle contains exactly half of that area.

So if a rectangle has area A = bh, then each triangle formed by cutting it diagonally has area A = ½bh.

This is why the triangle formula has the ½ factor - it represents the fact that a triangle is half of a rectangle with the same base and height.

You can verify this: If you have a rectangle with base 6 and height 4, its area is 24. If you cut it diagonally, each triangle has area ½(6)(4) = 12, and 12 + 12 = 24.

Question: Can I use any side of a triangle as the base, and how do I find the corresponding height?

Answer: Yes, you can use any side of a triangle as the base! The key is that the height must be the perpendicular distance from that chosen base to the opposite vertex.

Here's how to find the corresponding height:

  • Choose which side to use as the base
  • From the vertex opposite that base, draw a line perpendicular to the base
  • The length of this perpendicular line is the height

No matter which side you choose as the base, you'll get the same area:

Example: In a triangle with sides of lengths 3, 4, and 5:

  • If base = 3, height ≈ 4, then A = ½(3)(4) = 6
  • If base = 4, height ≈ 3, then A = ½(4)(3) = 6
  • If base = 5, height ≈ 2.4, then A = ½(5)(2.4) = 6

The area remains the same regardless of which side you choose as the base, but the base-height pair must be perpendicular.

Question: Why do parallelograms and rectangles have the same area formula even though parallelograms look "slanted"?

Answer: Parallelograms and rectangles have the same area formula (A = bh) because they have the same perpendicular height relative to their base.

Think of it this way: Imagine cutting a triangle from one end of a parallelogram and moving it to the other end. This rearranges the parallelogram into a rectangle without changing the area!

Here's the visual transformation:

  • Take a parallelogram with base b and height h
  • Cut along the height from one corner
  • Move the triangular piece to the other side
  • You now have a rectangle with the same base b and height h

Since no area was added or removed during this transformation, the area remains the same.

The key insight is that the "slant" of the parallelogram doesn't affect the area as long as the perpendicular height remains the same. The area depends only on the base and the perpendicular height, not on the shape's "tilt."

This is why A = bh works for both rectangles and parallelograms.