Solved Exercises on Volume of Prisms, Cylinders, Pyramids, and Cones in Grade 7

Master volume calculations: prisms, cylinders, pyramids, and cones through these 3 detailed exercises with comprehensive explanations.

Solution: Exercises 1 to 3
1 Volume of Rectangular Prism
Exercise 1
Find the volume of a rectangular prism with length = 8 cm, width = 5 cm, and height = 4 cm.
Definition:

Rectangular Prism: A 3D shape with 6 rectangular faces, 8 vertices, and 12 edges. Volume = length × width × height

Volume calculation method:
  1. Identify the three dimensions: length, width, and height
  2. Ensure all measurements are in the same unit
  3. Apply the formula: V = l × w × h
  4. Express the answer in cubic units
Dimensions
l=8cm, w=5cm, h=4cm
Formula
V = l×w×h
Volume
160 cm³
Step 1: Identify given dimensions

Length (l) = 8 cm, Width (w) = 5 cm, Height (h) = 4 cm

Step 2: Apply the volume formula

Volume = length × width × height

V = 8 × 5 × 4

Step 3: Calculate the product

V = 8 × 5 = 40

V = 40 × 4 = 160

Step 4: Express the answer with correct units

Since measurements were in centimeters, volume is in cubic centimeters

V = 160 cm³
Final answer:

The volume of the rectangular prism is 160 cubic centimeters

Applied rules:

• Volume Formula: V = l × w × h for rectangular prisms

• Unit Consistency: All dimensions must be in the same unit

• Cubic Units: Volume is expressed in cubic units (cm³, m³, etc.)

Tip 1: Remember that volume measures the amount of space inside a 3D shape.
Tip 2: Always label your answer with cubic units.
2 Volume of Cylinder
Exercise 2
Find the volume of a cylinder with radius = 3 cm and height = 7 cm. (Use π ≈ 3.14)
Definition:

Cylinder: A 3D shape with two parallel circular bases connected by a curved surface. Volume = πr²h

Dimensions
r=3cm, h=7cm
Formula
V = πr²h
Volume
197.82 cm³
Step 1: Identify given dimensions

Radius (r) = 3 cm, Height (h) = 7 cm

Step 2: Apply the cylinder volume formula

Volume = π × radius² × height

V = π × r² × h

Step 3: Substitute known values

V = 3.14 × (3)² × 7

V = 3.14 × 9 × 7

Step 4: Calculate step by step

V = 3.14 × 9 = 28.26

V = 28.26 × 7 = 197.82

Step 5: Express with correct units

Volume = 197.82 cubic centimeters

V = 197.82 cm³
Final answer:

The volume of the cylinder is approximately 197.82 cubic centimeters

Applied rules:

• Cylinder Formula: V = πr²h

• Pi Approximation: Use 3.14 for π unless specified otherwise

• Squaring Radius: Always square the radius, not the diameter

Tip 1: Remember that the radius is half the diameter.
Tip 2: The volume of a cylinder is essentially the area of the base circle times the height.
3 Volume of Cone
Exercise 3
Find the volume of a cone with radius = 4 cm and height = 9 cm. (Use π ≈ 3.14)
Definition:

Cone: A 3D shape with a circular base and a single vertex. Volume = (1/3)πr²h

Dimensions
r=4cm, h=9cm
Formula
V = (1/3)πr²h
Volume
150.72 cm³
Step 1: Identify given dimensions

Radius (r) = 4 cm, Height (h) = 9 cm

Step 2: Apply the cone volume formula

Volume = (1/3) × π × radius² × height

V = (1/3) × π × r² × h

Step 3: Substitute known values

V = (1/3) × 3.14 × (4)² × 9

V = (1/3) × 3.14 × 16 × 9

Step 4: Calculate step by step

V = (1/3) × 3.14 × 16 × 9

V = (1/3) × 452.16 = 150.72

Step 5: Express with correct units

Volume = 150.72 cubic centimeters

V = 150.72 cm³
Final answer:

The volume of the cone is approximately 150.72 cubic centimeters

Applied rules:

• Cone Formula: V = (1/3)πr²h

• One-Third Factor: A cone's volume is one-third of a cylinder with same base and height

• Order of Operations: Calculate r² first, then multiply by π, then divide by 3

Tip 1: A cone has 1/3 the volume of a cylinder with the same base and height.
Tip 2: Always check if you're given radius or diameter before applying formulas.
Volume Formulas and Definitions
V = l × w × h
Prism Volume
Prism
V = B × h
B = Base Area
Cylinder
V = πr²h
r = radius, h = height
Pyramid
V = (1/3)Bh
B = Base Area
Cone
V = (1/3)πr²h
r = radius, h = height
Key Definitions:

Volume: The amount of space occupied by a 3D shape

Base Area (B): The area of the bottom face of a prism or pyramid

Height (h): The perpendicular distance from the base to the top

Prism Properties: Two parallel congruent bases connected by rectangular faces
Cylinder Properties: Two parallel circular bases connected by curved surface
Pyramid Properties: Polygonal base with triangular faces meeting at apex
Cone Properties: Circular base with curved surface tapering to point
Methods, Tips, and Common Mistakes
Problem-Solving Methodology:
  1. Identify Shape: Determine which 3D figure you're working with
  2. Find Dimensions: Locate all necessary measurements
  3. Select Formula: Choose the correct volume formula
  4. Substitute Values: Plug measurements into the formula
  5. Calculate Carefully: Perform operations in correct order
  6. Check Units: Ensure final answer has cubic units
Tip 1: Always square the radius in cylinder and cone formulas, not the diameter.
Tip 2: Pyramids and cones have 1/3 the volume of prisms/cylinders with same base and height.
Tip 3: For complex prisms, find the base area first, then multiply by height.
Tip 4: Draw a diagram to visualize the shape and identify dimensions.
Common Mistakes to Avoid:

• Using diameter instead of radius in formulas

• Forgetting the 1/3 factor for pyramids and cones

• Mixing up units (meters vs centimeters)

• Calculating surface area instead of volume

• Misidentifying the shape type

Volume Relationships: Cone = (1/3)Cylinder; Pyramid = (1/3)Prism (same base and height)
Measurement Units: Volume always expressed in cubic units (cm³, m³, ft³, etc.)
Detailed Concepts and Applications
V = Bh
General Prism Formula
Advanced Concepts:

Triangular Prism: V = (1/2)bh × H where b and h are triangle base and height, H is prism height

Hexagonal Prism: V = (3√3/2)s² × H where s is side length of hexagon, H is prism height

Frustum: Truncated cone/pyramid volume requires special formula

Real-World Applications:
  1. Construction: Calculating concrete needed for cylindrical pillars
  2. Manufacturing: Determining material requirements for containers
  3. Agriculture: Measuring grain storage capacity in silos
  4. Engineering: Designing water tanks and storage vessels
Key Note: Understanding volume is crucial for capacity planning in real-world scenarios.
Key Note: Volume formulas connect to earlier knowledge of area formulas.
Key Note: Always verify your answer makes sense in context of the problem.
Key Note: Practice with different units to become comfortable with conversions.
Memory Aid: Think of volume as filling a container with small cubes.
Memory Aid: Pyramids and cones are "pointy," so they take up less space (1/3).
Essential Formulas to Remember:

• Rectangular Prism: V = l × w × h

• Cylinder: V = πr²h

• Cone: V = (1/3)πr²h

• Square Pyramid: V = (1/3)s²h

• Triangular Prism: V = (1/2)bh × H

Questions & Answers

Question: I keep getting confused between the formulas for cylinder and cone volume. Why does the cone have the 1/3 factor while the cylinder doesn't?

Answer: Great question! The relationship between cylinder and cone volumes is fascinating:

  • A cone with the same base and height as a cylinder occupies exactly 1/3 of the cylinder's volume.
  • You can visualize this: if you filled a cone with water and poured it into a cylinder of the same base and height, you'd need to fill the cone three times to fill the cylinder completely.
  • Mathematically: Vcylinder = πr²h and Vcone = (1/3)πr²h

The 1/3 factor comes from calculus integration, but intuitively, think of it this way: the cone "tapers" to a point, so it naturally holds less volume than the full cylinder. The cone's pointed top means much of the space that would be occupied in a cylinder is empty in the cone.

Memory tip: Cones are "pointy" so they take up less space (1/3 of a cylinder).

Question: When calculating the volume of a cylinder, how do I know whether to use the radius or diameter in the formula?

Answer: The standard formula for cylinder volume uses the radius:

  • Correct formula: V = πr²h (uses radius)
  • Wrong formula: V = πd²h (would use diameter incorrectly)

If you're given the diameter, remember that radius = diameter ÷ 2. For example, if diameter = 6 cm, then radius = 3 cm.

Always look for the "r" in the formula - that stands for radius. The formula involves r², which means you square the radius, not the diameter. Squaring the diameter would give you d² = (2r)² = 4r², which is 4 times too large!

Quick check: If you get an unexpectedly large volume, verify that you used the radius, not the diameter.

Question: Are there different formulas for different types of prisms, or is it always length × width × height?

Answer: The general formula for any prism is V = Base Area × Height, but the base area calculation depends on the base shape:

  • Rectangular Prism: V = l × w × h (base area = l × w)
  • Triangular Prism: V = (1/2)bh × H (base area = (1/2)bh)
  • Square Prism: V = s² × h (base area = s²)
  • Hexagonal Prism: V = (3√3/2)s² × h (base area = (3√3/2)s²)

The "height" (H) in these formulas refers to the length of the prism (the dimension perpendicular to the base), not the height of the triangular base.

So while the principle is always Base Area × Height, you need to calculate the specific base area depending on the shape of the base. For rectangular prisms, the base area formula is just length × width, which gives us the familiar l × w × h formula.