Graphing Inequalities - Detailed Exercises and Solutions

Master graphing inequalities: number line representation, coordinate plane graphing, and systems of inequalities with these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Number Line Graphing
Exercise 1
Graph the inequality x ≥ -3 on a number line
Definition:

Number Line: A visual representation of numbers as points on a straight line.

Graphing Inequalities: Showing all possible solutions of an inequality on a number line.

Graphing Method:
  1. Draw a number line with appropriate scale
  2. Locate the boundary point on the number line
  3. Determine if the boundary point is included (closed dot) or excluded (open dot)
  4. Shade the appropriate direction based on the inequality symbol
Inequality
x ≥ -3
Boundary
-3
Symbol
Closed dot
Direction
Right
Step 1: Identify the boundary point

The boundary point is -3 (where x = -3)

Step 2: Determine the symbol

Since the inequality is ≥ (greater than or equal to), use a closed dot at -3

Step 3: Determine the direction

Since x ≥ -3, shade to the right (toward larger numbers)

Step 4: Draw the graph

Place a closed dot at -3 and draw an arrow to the right

-5 -3 -1 1 3 5 →
Final answer:

The graph shows all numbers greater than or equal to -3.

Applied rules:

• Symbol Rule: ≥ and ≤ use closed dots, < and > use open dots

• Direction Rule: > and ≥ shade to the right, < and ≤ shade to the left

• Boundary Rule: The boundary point is included for ≥ and ≤, excluded for < and >

Key Tip: "Greater than" means shading to the right on the number line!
Common Mistake: Confusing open and closed dots for inclusive vs exclusive inequalities.
2 Coordinate Plane Graphing
Exercise 2
Graph the inequality y < 2x + 1 on a coordinate plane
Definition:

Coordinate Plane: A two-dimensional plane formed by the intersection of x and y axes.

Linear Inequality: An inequality that forms a region in the coordinate plane.

Inequality
y < 2x + 1
Line Type
Dashed
Slope
2
Y-intercept
1
Step 1: Graph the boundary line

Graph y = 2x + 1 using dashed line (since < means not equal to)

Step 2: Identify slope and y-intercept

Slope = 2, y-intercept = 1

Step 3: Determine shading direction

Since y < 2x + 1, shade below the line

Step 4: Test a point

Test (0,0): 0 < 2(0) + 1 → 0 < 1 ✓ (true, so shade the side containing (0,0))

5 3 1 -1 -3 -5 -2 0 2 4 6
Final answer:

The shaded region below the dashed line y = 2x + 1 represents all solutions to y < 2x + 1.

Applied rules:

• Line Type Rule: < and > use dashed lines, ≤ and ≥ use solid lines

• Shading Rule: For y < mx + b, shade below the line; for y > mx + b, shade above

• Test Point Rule: Use (0,0) if it's not on the line to determine which side to shade

Key Tip: Always use a test point to verify which side to shade!
Common Mistake: Forgetting to use dashed lines for strict inequalities (< and >).
3 System of Inequalities
Exercise 3
Graph the system: x + y ≤ 4 and x - y ≥ 2
Definition:

System of Inequalities: A set of two or more inequalities that must be satisfied simultaneously.

Solution Region: The area where all inequalities in the system are satisfied.

System
x + y ≤ 4 and x - y ≥ 2
Line 1
Solid, y ≤ -x + 4
Line 2
Solid, y ≤ x - 2
Solution
Overlap region
Step 1: Graph first inequality x + y ≤ 4

Graph y ≤ -x + 4: solid line, shade below

Step 2: Graph second inequality x - y ≥ 2

Graph y ≤ x - 2: solid line, shade below

Step 3: Identify solution region

The solution is where both shadings overlap

Step 4: Verify with test point

Test point (3,1): 3+1=4≤4 ✓ and 3-1=2≥2 ✓

5 3 1 -1 -3 -5 -2 0 2 4 6
Final answer:

The overlapping shaded region represents all solutions that satisfy both inequalities.

Applied rules:

• System Rule: The solution is the intersection of all individual solution regions

• Graphing Rule: Graph each inequality separately, then find the overlap

• Verification Rule: Test points in the overlapping region to confirm they satisfy all inequalities

Key Tip: Use different colors/shading patterns for each inequality to see the overlap clearly!
Common Mistake: Forgetting that the solution must satisfy ALL inequalities in the system.
Visual Infographic: Graphing Inequalities
Graphing Inequalities Guide
1
Identify
→
2
Graph
→
3
Shade
→
4
Verify
🔍
Symbol Type
≤, ≥ = closed, <, > = open
📏
Line Type
≤, ≥ = solid, <, > = dashed
➡️
Shading Direction
y < below, y > above
🎯
Test Point
Use (0,0) if not on line
🔄
Systems
Intersection of all regions
✅
Verify
Check with sample points
\(y < mx + b\)
Linear Inequality
Key Point: The solution region contains all ordered pairs that satisfy the inequality.
Memory Aid: "Less than" shades below, "Greater than" shades above.
Detailed Summary: Graphing Inequalities
Complete Learning Summary

Definitions:

Inequality: A mathematical statement that compares two expressions using symbols like <, >, ≤, ≥.

Graphing Inequalities: The process of representing the solution set of an inequality on a number line or coordinate plane.

Solution Region: The area on the graph that contains all ordered pairs that make the inequality true.

Boundary Line: The line that separates the solution region from the non-solution region.

System of Inequalities: A set of two or more inequalities that must be satisfied simultaneously.

Core Rules and Principles:

• Symbol Rule: ≥ and ≤ use closed dots/solid lines, < and > use open dots/dashed lines.

• Shading Rule: For y < mx + b, shade below; for y > mx + b, shade above.

• System Rule: The solution is the intersection of all individual solution regions.

• Verification Rule: Test points to confirm they satisfy the inequality.

Step-by-Step Method:

1. Identify the inequality: Determine the type of inequality and its boundary.

2. Graph the boundary: Draw the boundary line using appropriate line type (solid/dashed).

3. Determine shading: Decide which side of the boundary to shade based on the inequality symbol.

4. Shade the region: Shade the area that represents the solution set.

5. Verify: Test a point in the shaded region to confirm it satisfies the inequality.

Examples:

Number line: x > 2 → Open dot at 2, shade to the right

Coordinate plane: y ≤ 3x - 1 → Solid line, shade below

System: y < x + 2 AND y ≥ -x → Intersection of both regions

Vertical line: x < 3 → Vertical dashed line, shade to the left

Horizontal line: y ≥ -2 → Horizontal solid line, shade above

Tips and Tricks:

• Test point method: Always use (0,0) as a test point if it's not on the boundary line.

• Memory devices: "Less than" shades below, "Greater than" shades above.

• Color coding: Use different colors for multiple inequalities in a system.

• Check boundaries: Points on solid lines are included, points on dashed lines are not.

Common Pitfalls:

• Confusing solid and dashed lines for inclusive vs exclusive inequalities.

• Shading the wrong side of the boundary line.

• Forgetting to flip the inequality symbol when solving before graphing.

• Not considering the intersection in systems of inequalities.

Key Takeaways:

• The type of inequality symbol determines the type of boundary (dot or line).

• The direction of the inequality symbol determines the shading direction.

• Systems require finding the intersection of all individual solution regions.

• Verification with test points ensures accuracy of the graph.

Key Symbols and Their Meanings:

< : Less than (open dot/dashed line, shade left/below)

> : Greater than (open dot/dashed line, shade right/above)

≤ : Less than or equal to (closed dot/solid line, shade left/below)

≥ : Greater than or equal to (closed dot/solid line, shade right/above)

Advanced Techniques:
  1. Graphing compound inequalities: Handle each part separately, then combine.
  2. Non-linear inequalities: Similar approach but with curves instead of lines.
  3. Checking with substitution: Always verify solutions by plugging in test points.
Pro Tip: When graphing systems, lightly shade each region differently to see the overlap clearly.
Memory Device: "Less than" = "Low" (shade below), "Greater than" = "High" (shade above).
Critical Success Factors:

• Understanding the connection between inequality symbols and graph features

• Correctly identifying boundary lines and their types

• Accurately determining shading directions

• Properly interpreting systems of inequalities

Questions & Answers

Question: How do I know whether to use a solid or dashed line when graphing inequalities?

Answer: The type of inequality symbol determines the line type:

Solid Line: Use for ≤ and ≥ (includes the boundary)

  • For y ≤ mx + b, the line y = mx + b is part of the solution
  • Points ON the line satisfy the inequality

Dashed Line: Use for < and > (excludes the boundary)

  • For y < mx + b, the line y = mx + b is NOT part of the solution
  • Points ON the line do NOT satisfy the inequality

Think of it this way: if the inequality includes "or equal to" (≤ or ≥), the boundary is included, so use a solid line. If it's strictly less than or greater than (< or >), the boundary is excluded, so use a dashed line.

This same rule applies to number lines: closed dots for ≤ and ≥, open dots for < and >.

Question: How do I determine which side of the line to shade for y < 2x - 3?

Answer: There are two methods to determine which side to shade:

Method 1 - Symbol Rule: For y < mx + b, shade below the line. For y > mx + b, shade above the line.

Method 2 - Test Point Method: Choose a point not on the line and substitute it into the inequality:

  • Test point (0,0): 0 < 2(0) - 3 → 0 < -3 (false)
  • Since (0,0) makes the inequality false, don't shade the side containing (0,0)
  • Shade the opposite side (below the line)

The test point method is foolproof because it directly checks which side satisfies the inequality. The symbol rule is faster but requires remembering the directions.

For y < 2x - 3, since < means "less than," we shade below the line y = 2x - 3.

Question: When graphing a system of inequalities, what does the solution look like?

Answer: The solution to a system of inequalities is the intersection (overlap) of all individual solution regions.

For example, if you have two inequalities:

  • Inequality 1: Shaded region A
  • Inequality 2: Shaded region B
  • System solution: The area where A and B overlap

Key characteristics:

  • Every point in the overlapping region satisfies ALL inequalities in the system
  • The solution region might be bounded (a polygon) or unbounded (extending infinitely)
  • Some systems have no solution if the regions don't overlap

When graphing multiple inequalities:

  • Graph each inequality separately
  • Use different shading patterns or colors to distinguish regions
  • The final solution is where ALL shadings overlap

Any point in the overlapping area will satisfy every inequality in the system.