Solving Inequalities - Detailed Exercises and Solutions

Master solving inequalities: addition/subtraction, multiplication/division, and compound inequalities with these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Addition/Subtraction
Exercise 1
Solve the inequality: x + 5 < 12
Definition:

Inequality: A mathematical statement that compares two expressions using symbols like <, >, ≤, ≥.

Solution Set: The set of all values that make the inequality true.

Solving Inequalities Method:
  1. Isolate the variable on one side of the inequality
  2. Perform the same operation on both sides (maintain balance)
  3. Remember to flip the inequality symbol when multiplying or dividing by a negative number
  4. Express the solution using inequality notation
Original
x + 5 < 12
Subtract 5
x < 7
Step 1: Identify the operation

The variable x is being added to 5.

Step 2: Perform the inverse operation

To undo addition, subtract 5 from both sides:
x + 5 - 5 < 12 - 5

Step 3: Simplify both sides

Left side: x + 5 - 5 = x
Right side: 12 - 5 = 7
So x < 7

Step 4: Check the solution

Choose a number less than 7 (like 6):
6 + 5 = 11 < 12 ✓

x < 7
Final answer:

The solution is x < 7.

Applied rules:

• Balance Rule: Perform the same operation on both sides of the inequality

• Inverse Operations: Addition and subtraction are inverse operations

• Inequality Symbol: The direction of the symbol stays the same when adding or subtracting

Key Tip: The inequality symbol doesn't change when adding or subtracting!
Common Mistake: Forgetting to perform the operation on both sides of the inequality.
2 Multiplication/Division
Exercise 2
Solve the inequality: -3x ≥ 15
Definition:

Negative Coefficient: When the variable has a negative coefficient, special care is needed when solving.

Original
-3x ≥ 15
Divide by -3
x ≤ -5
Step 1: Identify the operation

The variable x is being multiplied by -3.

Step 2: Perform the inverse operation

To undo multiplication by -3, divide both sides by -3:
(-3x) ÷ (-3) ≥ 15 ÷ (-3)

Step 3: Apply the rule for negative division

When dividing by a negative number, flip the inequality symbol:
x ≤ -5

Step 4: Check the solution

Choose a number less than or equal to -5 (like -6):
-3(-6) = 18 ≥ 15 ✓

x ≤ -5
Final answer:

The solution is x ≤ -5.

Applied rules:

• Negative Division Rule: When dividing by a negative number, flip the inequality symbol

• Balance Rule: Perform the same operation on both sides

• Inverse Operations: Multiplication and division are inverse operations

Key Tip: Always flip the inequality symbol when multiplying or dividing by a negative number!
Common Mistake: Forgetting to flip the inequality symbol when dividing by a negative number.
3 Compound Inequality
Exercise 3
Solve the inequality: 2x - 3 > 5 and 2x - 3 < 11
Definition:

Compound Inequality: An inequality that combines two or more simple inequalities using "and" or "or".

Original
2x - 3 > 5 and 2x - 3 < 11
Add 3
2x > 8 and 2x < 14
Divide by 2
x > 4 and x < 7
Combined
4 < x < 7
Step 1: Solve each part separately

For 2x - 3 > 5:
2x > 8, so x > 4

For 2x - 3 < 11:
2x < 14, so x < 7

Step 2: Combine the solutions

Since both conditions must be true (connected by "and"), x must satisfy both:
x > 4 AND x < 7

Step 3: Express as a compound inequality

4 < x < 7

Step 4: Check the solution

Choose a number between 4 and 7 (like 5):
2(5) - 3 = 7, and 5 < 7 < 11 ✓

4 < x < 7
Final answer:

The solution is 4 < x < 7.

Applied rules:

• Compound Inequality: Solve each part separately, then combine

• "And" Condition: Both inequalities must be satisfied simultaneously

• Balance Rule: Perform the same operation on all parts of the inequality

Key Tip: For "and" compound inequalities, the solution is the intersection of both sets.
Common Mistake: Not considering whether the compound inequality uses "and" or "or".
Visual Infographic: Solving Inequalities
Inequality Solving Process
1
Isolate
→
2
Balance
→
3
Flip
→
4
Check
🔄
Balance
Both sides equal
⚠️
Flip Symbol
× or ÷ by neg
🎯
Isolate Variable
x > ?, x < ?
🔍
Check Solution
Test values
🔗
Compound
And/Or logic
✅
Verify
True statement
\(ax + b < c \Rightarrow x < \frac{c-b}{a} \text{ (if } a > 0\text{)}\)
Inequality Rule
Key Point: Always flip the inequality symbol when multiplying or dividing by a negative number.
Memory Aid: "What you do to one side, do to the other, but flip if negative!"
Detailed Summary: Solving Inequalities
Complete Learning Summary

Definitions:

Inequality: A mathematical statement that compares two expressions using inequality symbols (<, >, ≤, ≥).

Solution Set: The set of all values that make the inequality true.

Compound Inequality: An inequality that combines two or more simple inequalities using "and" or "or".

Interval Notation: A way to represent the solution set of an inequality.

Core Rules and Principles:

• Balance Rule: Whatever you do to one side of the inequality, you must do to the other side.

• Flip Rule: When multiplying or dividing by a negative number, flip the inequality symbol.

• Isolation Goal: Get the variable alone on one side of the inequality.

• Verification: Always check your solution by substituting test values.

Step-by-Step Method:

1. Isolate the variable: Use inverse operations to get the variable term alone.

2. Maintain balance: Perform the same operation on both sides of the inequality.

3. Watch for negatives: Flip the inequality symbol when multiplying or dividing by a negative number.

4. Express the solution: Write the solution using inequality notation.

5. Check your answer: Substitute test values to verify the solution.

Examples:

Simple: x + 3 < 7 → x < 4

With negative: -2x ≥ 6 → x ≤ -3

Compound: 2 < x + 1 < 5 → 1 < x < 4

Advanced: 3x - 2 ≤ 7 → x ≤ 3

With fractions: (1/2)x > 3 → x > 6

Tips and Tricks:

• Remember the flip rule: Always flip when multiplying or dividing by a negative number.

• Check your boundary: Test values on both sides of the boundary point.

• Graph for visualization: Use number lines to visualize the solution set.

• Work step-by-step: Write each step clearly to avoid mistakes.

Common Pitfalls:

• Forgetting to flip the inequality symbol when dividing by a negative number.

• Not performing operations on both sides of the inequality.

• Confusing "and" and "or" in compound inequalities.

• Making arithmetic errors when solving.

Key Takeaways:

• The main difference from equations is the flip rule for negative multiplication/division.

• Solutions to inequalities are often infinite sets of numbers.

• Compound inequalities require careful consideration of "and" vs "or".

• Checking solutions is crucial for verifying accuracy.

Key Inequality Symbols:

< : Less than

> : Greater than

≤ : Less than or equal to

≥ : Greater than or equal to

Advanced Techniques:
  1. Graphing solutions: Represent the solution set on a number line.
  2. Interval notation: Express solutions using interval notation [a, b].
  3. Checking with substitution: Always verify solutions by plugging in test values.
Pro Tip: When solving, always remember: "Flip the sign when dividing by a negative!"
Memory Device: "Negative times flips the sign" - NTF.
Critical Success Factors:

• Understanding when to flip the inequality symbol

• Correctly applying inverse operations

• Following the proper order of operations

• Verifying solutions by substitution

Questions & Answers

Question: Why do I have to flip the inequality symbol when multiplying or dividing by a negative number?

Answer: This happens because multiplying or dividing by a negative number reverses the order of numbers on the number line.

Consider this example:

  • Starting with: 3 < 5 (true)
  • Multiply both sides by -1: -3 < -5 (false!)
  • Correct answer: -3 > -5 (true)

When we multiply by -1, we reflect the numbers across zero on the number line, which reverses their order. The number that was smaller becomes larger, and vice versa.

This is why we must flip the inequality symbol whenever we multiply or divide by a negative number - to preserve the truth of the inequality.

The same principle applies to division by negative numbers since division is the inverse of multiplication.

Question: In the inequality 2x + 4 < 10, do I subtract 4 from both sides first or divide by 2 first?

Answer: You should subtract 4 from both sides first, then divide by 2.

Here's why - follow the order of operations in reverse (SADMEP):

  • In the expression 2x + 4, the operations performed on x are: multiply by 2, then add 4
  • To solve, undo these operations in reverse order: subtract 4, then divide by 2

Correct order:

  • 2x + 4 < 10
  • 2x + 4 - 4 < 10 - 4
  • 2x < 6
  • 2x ÷ 2 < 6 ÷ 2
  • x < 3

If you divided by 2 first, you'd get: x + 2 < 5, which still requires subtracting 2. So subtracting first is more direct.

This follows the principle of undoing operations in reverse order of how they were applied.

Question: What's the difference between "and" and "or" in compound inequalities?

Answer: The words "and" and "or" create very different solution sets.

"And" inequalities: Both conditions must be true simultaneously.

  • Example: x > 2 AND x < 5
  • Solution: 2 < x < 5 (numbers between 2 and 5)
  • Graph: The overlapping region of both conditions

"Or" inequalities: At least one condition must be true.

  • Example: x < 2 OR x > 5
  • Solution: All numbers less than 2 OR greater than 5
  • Graph: Both regions combined

Think of it this way:

  • "And" = Intersection (overlap) of both conditions
  • "Or" = Union (combination) of both conditions

The key is understanding whether the variable must satisfy both conditions or just one of them.