Solving One-Step and Two-Step Equations - Detailed Exercises and Solutions

Master solving equations: addition/subtraction, multiplication/division, and multi-step equations with these 3 detailed exercises.

Solution: Exercises 1 to 3
1 One-Step Addition
Exercise 1
Solve the equation: x + 7 = 15
Definition:

One-Step Equation: An equation that requires only one operation to solve for the variable.

Balancing Equations: Whatever operation you perform on one side of the equation, you must perform on the other side to maintain equality.

Solving One-Step Addition Method:
  1. Identify the operation being performed on the variable (addition)
  2. Perform the inverse operation (subtraction) on both sides
  3. Simplify both sides to isolate the variable
  4. Check your answer by substituting back into the original equation
Original
x + 7 = 15
Subtract 7
x + 7 - 7 = 15 - 7
Simplified
x = 8
Step 1: Identify the operation

The variable x is being added to 7.

Step 2: Perform the inverse operation

To undo addition, subtract 7 from both sides:
x + 7 - 7 = 15 - 7

Step 3: Simplify both sides

Left side: x + 7 - 7 = x
Right side: 15 - 7 = 8
So x = 8

Step 4: Check the solution

Substitute x = 8 back into the original equation:
8 + 7 = 15 ✓

x = 8
Final answer:

The solution is x = 8.

Applied rules:

• Balance Rule: Perform the same operation on both sides of the equation

• Inverse Operations: Addition and subtraction are inverse operations

• Identity Property: x + 0 = x

Key Tip: Always check your answer by substituting it back into the original equation!
Common Mistake: Forgetting to perform the operation on both sides of the equation.
2 One-Step Division
Exercise 2
Solve the equation: 4x = 28
Definition:

One-Step Multiplication/Division: An equation where the variable is multiplied or divided by a number, requiring division or multiplication to solve.

Original
4x = 28
Divide by 4
4x ÷ 4 = 28 ÷ 4
Simplified
x = 7
Step 1: Identify the operation

The variable x is being multiplied by 4.

Step 2: Perform the inverse operation

To undo multiplication, divide both sides by 4:
4x ÷ 4 = 28 ÷ 4

Step 3: Simplify both sides

Left side: 4x ÷ 4 = x
Right side: 28 ÷ 4 = 7
So x = 7

Step 4: Check the solution

Substitute x = 7 back into the original equation:
4(7) = 28 ✓

x = 7
Final answer:

The solution is x = 7.

Applied rules:

• Balance Rule: Perform the same operation on both sides of the equation

• Inverse Operations: Multiplication and division are inverse operations

• Identity Property: x × 1 = x

Key Tip: When dividing both sides by a number, the variable becomes isolated.
Common Mistake: Dividing only one side of the equation instead of both sides.
3 Two-Step Equation
Exercise 3
Solve the equation: 3x + 5 = 20
Definition:

Two-Step Equation: An equation that requires two operations to solve for the variable. Generally, we undo operations in reverse order of operations (PEMDAS backwards).

Original
3x + 5 = 20
Subtract 5
3x = 15
Divide by 3
x = 5
Step 1: Undo addition first

Subtract 5 from both sides to eliminate the constant term:
3x + 5 - 5 = 20 - 5
3x = 15

Step 2: Undo multiplication

Divide both sides by 3 to isolate x:
3x ÷ 3 = 15 ÷ 3
x = 5

Step 3: Check the solution

Substitute x = 5 back into the original equation:
3(5) + 5 = 15 + 5 = 20 ✓

x = 5
Final answer:

The solution is x = 5.

Applied rules:

• Reverse Order of Operations: Undo operations in reverse order (SADMEP)

• Balance Rule: Perform the same operation on both sides of the equation

• Isolation Goal: Get the variable alone on one side of the equation

Key Tip: Undo operations in reverse order of operations (subtract/add before multiply/divide).
Common Mistake: Performing operations in the wrong order or not applying them to both sides.
Visual Infographic: Solving Equations
Equation Solving Process
1
Identify
→
2
Undo
→
3
Isolate
→
4
Check
🔄
Inverse Ops
+/-, ×/÷
⚖️
Balance
Both sides equal
🎯
Isolate
x = ?
🔍
Check
Substitute back
📝
Order
SADMEP
✅
Verify
True statement
\(x + a = b \Rightarrow x = b - a\)
Addition/Subtraction
Key Point: Always maintain balance by performing operations on both sides of the equation.
Memory Aid: "What you do to one side, you must do to the other!"
Detailed Summary: Solving One-Step and Two-Step Equations
Complete Learning Summary

Definitions:

Equation: A mathematical statement that shows two expressions are equal (contains an equals sign).

Solution: The value of the variable that makes the equation true.

Inverse Operations: Operations that undo each other (addition/subtraction, multiplication/division).

One-Step Equation: An equation that requires only one operation to solve.

Two-Step Equation: An equation that requires two operations to solve.

Core Rules and Principles:

• Balance Rule: Whatever you do to one side of the equation, you must do to the other side.

• Inverse Operations: Use inverse operations to undo operations on the variable.

• Isolation Goal: Get the variable alone on one side of the equation.

• Verification: Always check your solution by substituting back into the original equation.

Step-by-Step Method:

1. Identify the operation(s): Determine what operations are being performed on the variable.

2. Apply inverse operations: Perform the inverse operation on both sides to undo the operation on the variable.

3. Simplify: Simplify both sides to isolate the variable.

4. Check: Substitute the solution back into the original equation to verify it's correct.

Examples:

One-step (addition): x + 5 = 12 → x = 12 - 5 → x = 7

One-step (multiplication): 3x = 15 → x = 15 ÷ 3 → x = 5

Two-step: 2x + 3 = 11 → 2x = 8 → x = 4

Advanced: 4(x - 1) = 12 → x - 1 = 3 → x = 4

With fractions: x/3 = 5 → x = 15

Tips and Tricks:

• Think of equations as balances: Both sides must stay equal.

• Undo operations in reverse order: Follow SADMEP (Subtract/Add, Divide/Multiply, Exponents, Parentheses).

• Always check your answer: Substitute back to make sure it's correct.

• Work neatly: Write each step clearly to avoid mistakes.

Common Pitfalls:

• Forgetting to apply operations to both sides of the equation.

• Performing operations in the wrong order for two-step equations.

• Making arithmetic errors when solving.

• Not checking the solution to verify correctness.

Key Takeaways:

• The goal is always to isolate the variable.

• Inverse operations are used to undo operations on the variable.

• Balance is maintained by performing the same operation on both sides.

• Checking solutions ensures accuracy and builds confidence.

Key Inverse Operations:

Addition ↔ Subtraction: x + 5 = 10 → x = 10 - 5

Multiplication ↔ Division: 4x = 12 → x = 12 ÷ 4

Division ↔ Multiplication: x/3 = 7 → x = 7 × 3

Positive ↔ Negative: -x = 5 → x = -5

Advanced Techniques:
  1. Clearing fractions: Multiply both sides by the denominator to eliminate fractions.
  2. Decimal equations: Multiply by powers of 10 to convert to whole numbers.
  3. Checking with substitution: Always verify solutions by plugging back in.
Pro Tip: When solving two-step equations, undo the addition/subtraction first, then multiplication/division.
Memory Device: "SADMEP" - reverse of PEMDAS for solving equations.
Critical Success Factors:

• Understanding the concept of balance in equations

• Correctly identifying and applying inverse operations

• Following the proper order of operations when solving

• Verifying solutions by substitution

Questions & Answers

Question: In the equation x - 8 = 12, do I add 8 or subtract 8 from both sides?

Answer: You add 8 to both sides of the equation.

Here's why:

  • In the equation x - 8 = 12, the variable x has 8 subtracted from it
  • To undo subtraction, you use its inverse operation: addition
  • Add 8 to both sides: x - 8 + 8 = 12 + 8
  • This simplifies to: x = 20

Remember: whatever operation you perform on one side of the equation, you must perform on the other side to maintain balance.

Check: 20 - 8 = 12 ✓

Question: For the equation x/4 = 6, do I multiply or divide both sides by 4?

Answer: You multiply both sides by 4.

Here's the reasoning:

  • In the equation x/4 = 6, the variable x is divided by 4
  • To undo division, you use its inverse operation: multiplication
  • Multiply both sides by 4: (x/4) × 4 = 6 × 4
  • This simplifies to: x = 24

Remember: multiplication and division are inverse operations.

Check: 24/4 = 6 ✓

Question: When solving 2x + 3 = 15, why do I subtract 3 first instead of dividing by 2 first?

Answer: You undo operations in reverse order of operations (PEMDAS).

In the expression 2x + 3:

  • First: x is multiplied by 2
  • Then: 3 is added to the result

To solve, you undo these operations in reverse order:

  • First: Undo the addition by subtracting 3
  • Then: Undo the multiplication by dividing by 2

If you tried to divide by 2 first, you'd get (2x + 3)/2 = 15/2, which is more complicated than x + 3/2 = 15/2.

The correct order is: 2x + 3 = 15 → 2x = 12 → x = 6.

This follows the principle of undoing operations in reverse order of how they were applied.