Rational Numbers: Numbers that can be expressed as a ratio of two integers (fractions, terminating or repeating decimals)
- Convert mixed numbers to improper fractions
- Perform the required operations
- Convert back to mixed numbers if needed
- Apply geometric formulas with rational numbers
8 1/2 = (8 × 2 + 1)/2 = 17/2 feet
6 3/4 = (6 × 4 + 3)/4 = 27/4 feet
P = 2(17/2 + 27/4)
First, find common denominator: 17/2 = 34/4
P = 2(34/4 + 27/4) = 2(61/4) = 122/4 = 30 1/2 feet
A = 17/2 × 27/4 = (17 × 27)/(2 × 4) = 459/8 = 57 3/8 square feet
Perimeter: 2(8.5 + 6.75) = 2(15.25) = 30.5 feet ✓
Area: 8.5 × 6.75 = 57.375 square feet = 57 3/8 square feet ✓
The perimeter of the garden is 30 1/2 feet and the area is 57 3/8 square feet.
• Mixed to improper: a b/c = (ac + b)/c
• Fraction addition: Find common denominator first
• Fraction multiplication: Multiply numerators and denominators
Percent: A ratio expressed as a fraction of 100; 25% = 25/100 = 0.25
r = d ÷ 2 = 4 ÷ 2 = 2 feet
A = πr² = 3.14 × (2)² = 3.14 × 4 = 12.56 square feet
25% = 25 ÷ 100 = 0.25
Placemat area = 25% of table area = 0.25 × 12.56 = 3.14 square feet
3.14 ÷ 12.56 = 0.25 = 25% ✓
The area of the placemat is 3.14 square feet.
• Percent to decimal: Divide by 100
• Circle area: A = πr²
• Part of whole: Multiply by decimal equivalent of percent
Decimal Operations: Performing arithmetic operations with numbers containing decimal points
A = ½bh = ½ × 12.5 × 8.4
A = 0.5 × 12.5 × 8.4 = 52.5 square meters
Total cost = Area × Cost per square meter
Total cost = 52.5 × $2.75
52.5 × 2.75 = 144.375
Round to nearest cent: $144.38
Area: ½ × 12.5 × 8.4 = 52.5 m² ✓
Cost: 52.5 × $2.75 = $144.375 ≈ $144.38 ✓
The total cost of the sail is $144.38.
• Triangle area: A = ½bh
• Decimal multiplication: Count decimal places in factors
• Monetary values: Round to nearest cent
Rational Number: A number that can be expressed as a/b where a and b are integers and b ≠ 0
Fraction: A number representing part of a whole (a/b)
Decimal: A number expressed in base 10 with a decimal point
Percent: A ratio expressed as a fraction of 100
Mixed Number: A whole number combined with a fraction
Improper Fraction: A fraction where the numerator is greater than or equal to the denominator
Terminating Decimal: A decimal that ends after a finite number of digits
Repeating Decimal: A decimal with a pattern that repeats indefinitely
- Identify: Recognize the type of rational numbers in the problem
- Convert: Change forms if necessary (fractions to decimals, percents to decimals)
- Apply: Use appropriate geometric formulas
- Calculate: Perform the required arithmetic operations
- Verify: Check that the answer is reasonable and in proper units
Scale Factor: The ratio between the dimensions of a model and the actual object
Scale: 1 inch on model = 4 feet in reality
Model length = 3.5 inches
Actual length = 3.5 × 4 = 14 feet
Model width = 2.25 inches
Actual width = 2.25 × 4 = 9 feet
A = length × width = 14 × 9 = 126 square feet
Model area: 3.5 × 2.25 = 7.875 square inches
Scale factor for area: 4² = 16
Actual area: 7.875 × 16 = 126 square feet ✓
The actual dimensions of the building are 14 feet by 9 feet, with an area of 126 square feet.
• Scale conversion: Multiply model dimensions by scale factor
• Area scaling: Area scales by the square of the linear scale factor
• Decimal multiplication: Carefully multiply decimals with proper place value
Annulus: The area between two concentric circles (like a ring or walkway around a pool)
Inner radius (pool): r = 15 feet
Outer radius (pool + walkway): R = 15 + 3 = 18 feet
A_outer = πR² = 3.14 × (18)² = 3.14 × 324 = 1,017.36 square feet
A_inner = πr² = 3.14 × (15)² = 3.14 × 225 = 706.5 square feet
A_walkway = A_outer - A_inner = 1,017.36 - 706.5 = 310.86 square feet
Using exact formula: A_walkway = π(R² - r²) = 3.14(324 - 225) = 3.14(99) = 310.86 square feet
A_walkway ≈ 310.9 square feet
The area of the walkway is approximately 310.9 square feet.
• Annulus area: A = π(R² - r²) where R is outer radius and r is inner radius
• Circle area: A = πr²
• Subtraction: Area of walkway = Total area - Pool area
Rational Number Operations: Arithmetic operations (addition, subtraction, multiplication, division) performed with rational numbers
Geometric Application: Using mathematical operations to solve problems involving geometric shapes and measurements
Scale Model: A proportional representation of an object where all dimensions are reduced by the same factor
Proportional Reasoning: Understanding relationships between quantities that maintain a constant ratio
Unit Conversion: Changing measurements from one unit to another while maintaining the same quantity
Measurement Precision: The degree of exactness in a measurement, often related to decimal places
- Identify: Recognize the type of rational numbers and geometric situation
- Plan: Select appropriate formulas and conversion methods
- Convert: Change number forms as needed (fractions, decimals, percents)
- Calculate: Perform arithmetic operations with attention to place value
- Apply: Use geometric formulas with calculated values
- Verify: Check reasonableness and units of the final answer
• Fraction operations: Find common denominators for addition/subtraction, multiply numerators and denominators for multiplication
• Decimal operations: Align decimal points for addition/subtraction, count decimal places for multiplication
• Percent conversions: Divide by 100 to convert percent to decimal
• Geometric formulas: Use appropriate formulas for area, perimeter, and volume calculations
• Scale factors: Linear dimensions multiply by scale factor, areas by scale factor squared, volumes by scale factor cubed
- Fraction: 3/4 × 2/3 = 1/2
- Decimal: 0.75 × 0.666... ≈ 0.5
- Percent: 75% of 66.67% ≈ 50%
Analysis: This visualization shows how different representations yield the same results.
- Fractions: Exact results, good for precise calculations
- Decimals: Convenient for calculators and real-world measurements
- Percents: Useful for expressing parts of wholes