Radius and Diameter - Complete Guide

Master radius and diameter calculations through 5 detailed exercises with comprehensive solutions and visual explanations.

Circle Infographic

Circle Components

Radius (r)
Center
Diameter (d)
\(d = 2r\)
Diameter = 2 × Radius
\(r = \frac{d}{2}\)
Radius = Diameter ÷ 2
Radius
Distance from center to edge
Diameter
Distance across circle through center
Relationship
d = 2r and r = d/2
Circumference
C = πd or C = 2πr
Exercise Solutions 1-2
1 Basic Radius-Diameter Conversion
Exercise 1
A circular garden has a radius of 8 meters. What is the diameter of the garden? If another garden has a diameter of 14 feet, what is its radius?
Key Relationship:

Diameter: Distance across a circle passing through the center

Radius: Distance from the center to any point on the circle

Relationship: d = 2r and r = d/2

Solution Strategy:
  1. For finding diameter: multiply radius by 2
  2. For finding radius: divide diameter by 2
  3. Always include units in the final answer
Given
r=8m, d=14ft
Part 1
d = 2×8 = 16m
Part 2
r = 14÷2 = 7ft
Step 1: Calculate diameter from radius

Given: radius = 8 meters

Formula: d = 2r

d = 2 × 8 = 16 meters

Step 2: Calculate radius from diameter

Given: diameter = 14 feet

Formula: r = d/2

r = 14/2 = 7 feet

Step 3: Verify relationships

Check: If r = 8, then d should be 16 ✓

Check: If d = 14, then r should be 7 ✓

Garden 1: Diameter = 16 m
Garden 2: Radius = 7 ft
Final Answer:

The first garden has a diameter of 16 meters, and the second garden has a radius of 7 feet.

Key Rules Applied:

• Basic relationship: d = 2r and r = d/2

• Units consistency: Keep units the same in calculations

• Verification: Always check your answers make sense

Tip: Remember diameter is always twice the radius!
2 Real-World Measurement Problem
Exercise 2
A circular table has a diameter of 120 cm. A round tablecloth needs to hang 15 cm over the edge all around. What should be the diameter of the tablecloth? What is its radius?
Problem Analysis:

Table diameter: 120 cm

Overhang: 15 cm on each side

Tablecloth diameter: Table diameter + 2 × overhang

Solution Process:
  1. Calculate total extra length needed for overhang
  2. Add to table diameter to get tablecloth diameter
  3. Calculate radius from new diameter
Given
Table d=120cm, overhang=15cm
Tablecloth d
120+2×15 = 150cm
Tablecloth r
150÷2 = 75cm
Step 1: Understand the overhang requirement

The tablecloth needs to hang 15 cm over each edge

This means 15 cm extra on left + 15 cm extra on right = 30 cm total extra

Step 2: Calculate tablecloth diameter

Tablecloth diameter = Table diameter + 2 × overhang

Tablecloth diameter = 120 + 2(15) = 120 + 30 = 150 cm

Step 3: Calculate tablecloth radius

Tablecloth radius = Tablecloth diameter ÷ 2

Tablecloth radius = 150 ÷ 2 = 75 cm

Tablecloth Diameter: 150 cm
Tablecloth Radius: 75 cm
Final Answer:

The tablecloth should have a diameter of 150 cm and a radius of 75 cm.

Key Rules Applied:

• Real-world scaling: Account for overhang on both sides

• Relationship preservation: d = 2r still applies to new dimensions

• Unit consistency: All measurements in same units

Tip: In real problems, draw a diagram to visualize the situation.
Exercise Solutions 3-5
3 Multiple Circle Comparison
Exercise 3
Circle A has a radius of 6 inches. Circle B has a diameter of 16 inches. Which circle has a larger radius? By how much? What is the combined diameter of both circles?
Comparison Strategy:

Circle A: Given radius directly

Circle B: Need to convert diameter to radius

Comparison: Compare radii values

Solution Approach:
  1. Find radius of Circle B using diameter
  2. Compare the two radii
  3. Calculate difference between radii
  4. Calculate combined diameter
Circle A
r=6in
Circle B
r=16÷2=8in
Difference
8-6=2in
Combined d
12+16=28in
Step 1: Identify Circle A's radius

Circle A radius = 6 inches (given)

Step 2: Calculate Circle B's radius

Circle B diameter = 16 inches (given)

Circle B radius = diameter ÷ 2 = 16 ÷ 2 = 8 inches

Step 3: Compare radii

Circle A radius: 6 inches

Circle B radius: 8 inches

Circle B has the larger radius

Step 4: Calculate difference

Difference = 8 - 6 = 2 inches

Step 5: Calculate combined diameter

Circle A diameter = 2 × 6 = 12 inches

Circle B diameter = 16 inches (given)

Combined diameter = 12 + 16 = 28 inches

Circle B larger by 2 in
Combined diameter: 28 in
Final Answer:

Circle B has a larger radius by 2 inches. The combined diameter of both circles is 28 inches.

Key Rules Applied:

• Unit conversion: Convert to same measurement before comparing

• Systematic approach: Solve step by step

• Verification: Check that Circle B's radius is indeed larger

Tip: When comparing, convert everything to the same measurement type.
4 Fractional Dimensions
Exercise 4
A circular mirror has a diameter of 2.5 feet. What is its radius? If the diameter were increased by 50%, what would be the new radius?
Percentage Increase:

Original diameter: 2.5 feet

50% increase: Original × (1 + 0.50)

New diameter: 2.5 × 1.5 = 3.75 feet

Solution Process:
  1. Calculate original radius from diameter
  2. Calculate new diameter after 50% increase
  3. Calculate new radius from new diameter
Original
d=2.5ft, r=1.25ft
New d
2.5×1.5 = 3.75ft
New r
3.75÷2 = 1.875ft
Step 1: Calculate original radius

Original radius = Original diameter ÷ 2

Original radius = 2.5 ÷ 2 = 1.25 feet

Step 2: Calculate new diameter after 50% increase

New diameter = Original diameter × (1 + percentage increase)

New diameter = 2.5 × (1 + 0.50) = 2.5 × 1.5 = 3.75 feet

Step 3: Calculate new radius

New radius = New diameter ÷ 2

New radius = 3.75 ÷ 2 = 1.875 feet

Step 4: Express as fraction if needed

1.875 = 15/8 feet

Original radius: 1.25 ft
New radius: 1.875 ft
Final Answer:

The original radius is 1.25 feet. After a 50% increase in diameter, the new radius is 1.875 feet.

Key Rules Applied:

• Percentage calculation: New value = Original × (1 + percentage as decimal)

• Decimal to fraction: 1.875 = 15/8

• Relationship consistency: d = 2r always holds

Tip: When dealing with percentages, convert to decimals for easier calculation.
5 Artistic Design Problem
Exercise 5
An artist is creating a circular pattern where each ring has a diameter 4 cm larger than the previous ring. If the innermost circle has a radius of 3 cm, what are the diameters of the first four rings? What is the radius of the fourth ring?
Pattern Recognition:

Innermost circle: radius = 3 cm

Each subsequent ring: diameter increases by 4 cm

Pattern: Arithmetic sequence with common difference = 4 cm

Solution Strategy:
  1. Find diameter of innermost circle
  2. Add 4 cm repeatedly to get next diameters
  3. Convert each diameter to radius as needed
Ring 1
r=3cm, d=6cm
Ring 2
d=10cm, r=5cm
Ring 3
d=14cm, r=7cm
Ring 4
d=18cm, r=9cm
Step 1: Find diameter of innermost circle

Innermost circle radius = 3 cm

Innermost circle diameter = 2 × 3 = 6 cm

Step 2: Calculate diameter of Ring 2

Ring 2 diameter = Ring 1 diameter + 4 cm

Ring 2 diameter = 6 + 4 = 10 cm

Step 3: Calculate diameter of Ring 3

Ring 3 diameter = Ring 2 diameter + 4 cm

Ring 3 diameter = 10 + 4 = 14 cm

Step 4: Calculate diameter of Ring 4

Ring 4 diameter = Ring 3 diameter + 4 cm

Ring 4 diameter = 14 + 4 = 18 cm

Step 5: Calculate radius of Ring 4

Ring 4 radius = Ring 4 diameter ÷ 2

Ring 4 radius = 18 ÷ 2 = 9 cm

Ring 1: d=6cm, r=3cm
Ring 2: d=10cm, r=5cm
Ring 3: d=14cm, r=7cm
Ring 4: d=18cm, r=9cm
Final Answer:

The diameters of the first four rings are 6 cm, 10 cm, 14 cm, and 18 cm. The radius of the fourth ring is 9 cm.

Key Rules Applied:

• Arithmetic sequence: Each term differs by constant amount

• Pattern recognition: Identify the rule governing the sequence

• Consistent relationship: d = 2r applies to all circles

Tip: In pattern problems, write out the first few terms to see the relationship.

Comprehensive Summary: Radius and Diameter

Key Definitions

Circle: A set of points equidistant from a central point

Radius (r): The distance from the center of a circle to any point on its edge

Diameter (d): The distance across a circle passing through its center

Center: The exact middle point of a circle

Core Relationships

Fundamental Relationship:

  • d = 2r (diameter equals twice the radius)
  • r = d/2 (radius equals diameter divided by 2)

Related Formulas:

  • Circumference: C = πd or C = 2πr
  • Area: A = πr²
Conversion Methods

To find diameter from radius: d = 2r

To find radius from diameter: r = d/2

Steps:

  1. Identify which measurement you have (radius or diameter)
  2. Choose the appropriate formula
  3. Substitute known values
  4. Perform the calculation
  5. Include units in the answer
Common Applications

Real-world problems: Wheels, plates, tables, mirrors

Construction: Roundabouts, pipes, columns

Art and design: Patterns, logos, decorations

Engineering: Gears, bearings, circular components

Everyday objects: Coins, cups, wheels

Tips & Common Mistakes

Tips:

  • Remember: diameter is always twice the radius
  • Draw a diagram to visualize the problem
  • Always include units in your final answer
  • Check your work by using the reverse operation

Common Mistakes:

  • Confusing radius and diameter
  • Forgetting to multiply/divide by 2
  • Mixing up units in calculations
  • Not checking if answer makes sense
Memorization Aids

Diameter: "Across" the circle (think "D = Across")

Radius: "Radial" from center to edge

Relationship: "Diameter is Double the radius"

Formula: "d = 2r" sounds like "deer = 2 are"

Visual: Picture the diameter as two radii placed end to end

Questions & Answers

Question: How can I remember which is bigger - radius or diameter?

Answer: The diameter is always bigger than the radius because the diameter passes through the center and spans the entire width of the circle, while the radius only goes from the center to the edge. Think of it this way: diameter = radius + radius, so diameter is always twice as big as the radius.

Question: When solving word problems, how do I know if I need to find the radius or diameter?

Answer: Read the problem carefully and identify what is being asked:

  • If the question mentions "across," "spanning," or "from one side to the other through the center," it's asking for the diameter
  • If it mentions "from the center to the edge," it's asking for the radius
  • If you're given one and asked for the other, use the relationship d = 2r or r = d/2

Question: Can the radius ever be larger than the diameter?

Answer: No, the radius can never be larger than the diameter. By definition, the diameter is the longest distance across a circle and equals exactly twice the radius. Since d = 2r, the diameter is always exactly double the radius, making it impossible for the radius to exceed the diameter.