Rational number: A number that can be expressed as a fraction p/q where p and q are integers and q ≠ 0.
Comparing fractions: Determining which fraction is greater, lesser, or if they are equal.
Common denominator: The same denominator used to compare fractions.
- Find a common denominator or use cross-multiplication
- Convert fractions to equivalent forms if needed
- Compare numerators (when denominators are equal)
- State the correct inequality symbol
For 3/4 and 5/6: Compare 3×6 with 4×5
3×6 = 18 and 4×5 = 20
Since 18 < 20, then 3/4 < 5/6
4/6 = 2/3 (divide numerator and denominator by 2)
Therefore: 2/3 = 4/6
For 7/8 and 5/7: Compare 7×7 with 8×5
7×7 = 49 and 8×5 = 40
Since 49 > 40, then 7/8 > 5/7
For 3/4 and 5/6: LCD = 12 → 9/12 vs 10/12 → 9 < 10 ✓
For 7/8 and 5/7: LCD = 56 → 49/56 vs 40/56 → 49 > 40 ✓
(a) 3/4 < 5/6, (b) 2/3 = 4/6, (c) 7/8 > 5/7
• Cross multiplication: Compare ad vs bc for a/b vs c/d
• Simplification: Reduce fractions to lowest terms
• Common denominator: Convert to same denominator for direct comparison
Ordering decimals: Arranging decimal numbers in ascending (smallest to largest) or descending order.
Negative numbers: Numbers less than zero, positioned to the left of zero on the number line.
Place value: The value of a digit based on its position in the number.
Negative: -2.3, -1.25, -0.8
Positive: 1.75, 0.5, 2.1
Zero: None in this set
Compare absolute values: |-2.3| = 2.3, |-1.25| = 1.25, |-0.8| = 0.8
Since 2.3 > 1.25 > 0.8, then -2.3 < -1.25 < -0.8
Compare: 0.5, 1.75, 2.1
Since 0.5 < 1.75 < 2.1
Negative numbers come first, then zero (if present), then positive numbers
Order: -2.3, -1.25, -0.8, 0.5, 1.75, 2.1
Each number appears to the right of the previous one on the number line
From least to greatest: -2.3, -1.25, -0.8, 0.5, 1.75, 2.1
• Negative comparison: Larger absolute value = smaller number
• Decimal comparison: Compare integer parts first, then decimal parts
• Ordering principle: Negative < Zero < Positive
Mixed forms: Numbers expressed as fractions, decimals, and integers.
Standardization: Converting all numbers to the same form for easy comparison.
0.75 = 0.75
3/5 = 0.6
-0.2 = -0.2
2/3 = 0.666... ≈ 0.667
-1/4 = -0.25
0.6 = 0.6
Negatives: -0.25, -0.2
Positives: 0.6, 0.6, 0.667, 0.75
Since 0.25 > 0.2, then -0.25 < -0.2
0.6 = 0.6 < 0.667 < 0.75
Order: -0.25, -0.2, 0.6, 0.6, 0.667, 0.75
Return to original forms: -1/4, -0.2, 0.6, 3/5, 2/3, 0.75
From least to greatest: -1/4, -0.2, 0.6, 3/5, 2/3, 0.75
• Standardization: Convert all to same form before comparison
• Sign consideration: Negative numbers are always smaller than positive numbers
• Equivalent forms: 3/5 = 0.6 in value
Rational number: Any number that can be expressed as a fraction p/q where p and q are integers and q ≠ 0
Equivalent fractions: Fractions that represent the same value (e.g., 1/2 = 2/4)
Terminating decimal: A decimal that ends after a finite number of digits
Repeating decimal: A decimal that has a repeating pattern of digits
Number line: A visual representation of numbers as points on a straight line
- Identify number types: Determine if numbers are fractions, decimals, or integers
- Choose comparison form: Convert all to same form (usually decimals)
- Apply comparison rules: Use appropriate rules for the number type
- Order systematically: Separate by sign, then order within each group
- Present results: State the correct order or inequality
• Fractions: Cross multiply or find common denominators
• Decimals: Compare place values from left to right
• Signs: Negative < Positive
• Zero: Greater than all negatives, less than all positives
• Equivalency: Simplify fractions before comparing
Number line: A straight line with numbers placed at equal intervals, used to visualize number relationships.
Ordering: Arranging numbers from smallest to largest (ascending) or largest to smallest (descending).
-3/2 = -1.5
1.5 = 1.5
-2 = -2.0
5/4 = 1.25
0 = 0.0
-0.75 = -0.75
Negative numbers: -2.0, -1.5, -0.75 (remember larger absolute value is smaller)
Non-negative: 0.0, 1.25, 1.5
Complete order: -2, -1.5, -0.75, 0, 1.25, 1.5
From greatest to least: 1.5, 1.25, 0, -0.75, -1.5, -2
1.5, 5/4, 0, -0.75, -3/2, -2
From greatest to least: 1.5, 5/4, 0, -0.75, -3/2, -2
• Number line positioning: Greater numbers are to the right
• Negative comparison: Larger absolute value = smaller number
• Order reversal: Reverse sequence for opposite order
Elevation change: Positive values indicate an increase in height, negative values indicate a decrease.
Contextual ordering: Ordering based on the meaning of the numbers in the problem.
Changes: -150m, 200m, -75m, 100m, -200m, 50m
Least to greatest: -200m, -150m, -75m, 50m, 100m, 200m
Greatest decrease (most negative) to greatest increase (most positive)
Order: -200m (biggest drop), -150m, -75m, 50m, 100m, 200m (biggest climb)
From greatest decrease to greatest increase: -200m, -150m, -75m, 50m, 100m, 200m
From greatest decrease to greatest increase in elevation: -200m, -150m, -75m, 50m, 100m, 200m
• Contextual interpretation: Understand what positive/negative values mean
• Standard ordering: Order by numerical value
• Real-world application: Connect mathematical order to practical meaning
Rational number: A number that can be expressed as p/q where p and q are integers and q ≠ 0
Terminating decimal: A decimal that ends (e.g., 0.5, 0.75)
Repeating decimal: A decimal that has a repeating pattern (e.g., 0.333..., 0.1666...)
Number line: A visual representation where numbers are placed in order
Equivalent fractions: Fractions that represent the same value (e.g., 1/2 = 2/4)
- Identify number types: Recognize fractions, decimals, integers, mixed numbers
- Standardize form: Convert all to same form (usually decimals)
- Separate by sign: Handle negatives and positives separately
- Apply comparison rules: Use appropriate technique for the number type
- Order systematically: Arrange from least to greatest or greatest to least
- Verify: Double-check the order makes sense
• Standardization: Convert to same form for accurate comparison
• Sign matters: Negative numbers are always less than positive numbers
• Place value: For decimals, compare from left to right
• Cross multiplication: For fractions, compare ad vs bc for a/b vs c/d
• Zero: Greater than all negatives, less than all positives
• Verification: Always check that the final order makes sense