Fraction to decimal: Converting a fraction to its decimal equivalent by dividing numerator by denominator.
Terminating decimal: A decimal that ends after a finite number of digits.
Repeating decimal: A decimal that has a repeating pattern of digits.
- Divide the numerator by the denominator
- Continue division until remainder is 0 (terminating) or pattern repeats (repeating)
- Identify the type of decimal
3 ÷ 4 = 0.75
This is a terminating decimal (ends after 2 digits)
7 ÷ 8 = 0.875
This is a terminating decimal (ends after 3 digits)
2 ÷ 3 = 0.666... = 0.6̄
This is a repeating decimal (6 repeats indefinitely)
5 ÷ 6 = 0.8333... = 0.83̄
This is a repeating decimal (3 repeats indefinitely)
Terminating: 3/4 = 0.75, 7/8 = 0.875
Repeating: 2/3 = 0.6̄, 5/6 = 0.83̄
3/4 = 0.75 (terminating), 7/8 = 0.875 (terminating), 2/3 = 0.6̄ (repeating), 5/6 = 0.83̄ (repeating)
• Division: Numerator ÷ Denominator
• Terminating: Denominator factors only include 2 and/or 5
• Repeating: Other prime factors in denominator
Integer: Positive or negative whole numbers including zero.
Operations with integers: Following rules for signs when adding, subtracting, multiplying, and dividing.
Order of operations: PEMDAS/BODMAS applies to integers as well.
-15 + 8 - (-3) + 7
= -15 + 8 + 3 + 7
= -15 + 18 = 3
(-4) × 3 ÷ (-2) × 5
= -12 ÷ (-2) × 5
= 6 × 5 = 30
-24 ÷ 4 + (-3) × 2 - 7
= -6 + (-6) - 7
= -6 - 6 - 7 = -19
Remember: Subtracting a negative = adding a positive
Multiplying/dividing: Even number of negatives = positive, odd = negative
(a) -15 + 8 - (-3) + 7 = 3, (b) (-4) × 3 ÷ (-2) × 5 = 30, (c) -24 ÷ 4 + (-3) × 2 - 7 = -19
• Subtraction: a - (-b) = a + b
• Multiplication: Count negative signs, even = positive, odd = negative
• Order of operations: Perform operations left to right after handling parentheses
Decimal to fraction: Converting a decimal to its fractional equivalent.
Simplifying fractions: Dividing numerator and denominator by their GCD.
Repeating decimals: Special technique using algebra to convert.
0.6 has 1 digit after decimal → denominator is 10
0.6 = 6/10
Simplify: GCD(6,10) = 2 → 6÷2/10÷2 = 3/5
0.375 has 3 digits after decimal → denominator is 1000
0.375 = 375/1000
Simplify: GCD(375,1000) = 125 → 375÷125/1000÷125 = 3/8
Let x = 0.222...
10x = 2.222...
10x - x = 2.222... - 0.222... = 2
9x = 2 → x = 2/9
Let x = 0.1666...
10x = 1.666...
100x = 16.666...
100x - 10x = 16.666... - 1.666... = 15
90x = 15 → x = 15/90 = 1/6
0.6 = 3/5, 0.375 = 3/8, 0.2̄ = 2/9, 0.16̄ = 1/6
• Terminating decimals: Place over power of 10 based on decimal places
• Repeating decimals: Use algebraic method with place value
• Simplification: Divide by GCD to get simplest form
Integer: Whole numbers including positive, negative, and zero
Fraction: Ratio of two integers (numerator/denominator)
Decimal: Number expressed in base-10 positional notation
Rational number: Any number that can be expressed as a fraction
Terminating decimal: Decimal that ends after finite digits
Repeating decimal: Decimal with repeating pattern of digits
- Identify the number type: Fraction, decimal, or integer
- Choose conversion method: Based on the operation needed
- Apply appropriate algorithm: Division, multiplication, or algebraic method
- Simplify if needed: Reduce fractions to lowest terms
- Verify the result: Check if conversion is correct
• Fraction to decimal: Divide numerator by denominator
• Decimal to fraction: Place over appropriate power of 10
• Sign rules: Even number of negatives = positive
• Terminating condition: Denominator factors only 2 and 5
• Simplification: Divide by GCD to get lowest terms
Ordering rational numbers: Arranging numbers in ascending or descending order.
Number line: Visual representation of numbers arranged by value.
-1.5 = -1.5
3/4 = 0.75
-2 = -2.0
0.6 = 0.6
-0.75 = -0.75
2.25 = 2.25
-3/2 = -1.5
For negative numbers, the one with larger absolute value is smaller
-2.0 < -1.5 < -0.75
For positive numbers, larger value is greater
0.6 < 0.75 < 2.25
Negative numbers first, then positive
-2.0, -1.5, -1.5, -0.75, 0.6, 0.75, 2.25
From least to greatest: -2, -1.5, -3/2, -0.75, 0.6, 3/4, 2.25
From least to greatest: -2, -1.5, -3/2, -0.75, 0.6, 3/4, 2.25
• Conversion: Convert to same form for easy comparison
• Negative comparison: Larger absolute value = smaller number
• Positive comparison: Larger value = greater number
Mixed operations: Calculations involving multiple number types and operations.
Order of operations: PEMDAS/BODMAS applies to mixed number types.
-3/4 = -0.75
Expression becomes: 2.5 + (-0.75) × 1.6 ÷ (-0.8) - 1.25
First: (-0.75) × 1.6 = -1.2
Then: -1.2 ÷ (-0.8) = 1.5
Expression becomes: 2.5 + 1.5 - 1.25
First: 2.5 + 1.5 = 4.0
Then: 4.0 - 1.25 = 2.75
Check: 2.5 + (-0.75) × 1.6 ÷ (-0.8) - 1.25 = 2.5 + 1.5 - 1.25 = 2.75
2.5 + (-3/4) × 1.6 ÷ (-0.8) - 1.25 = 2.75
• Order of operations: Follow PEMDAS strictly
• Sign rules: Negative ÷ Negative = Positive
• Conversion: Convert to same form when convenient
Rational number: Any number that can be expressed as p/q where p and q are integers and q ≠ 0
Integer: Whole numbers including positive, negative, and zero
Fraction: Part of a whole expressed as numerator/denominator
Decimal: Number expressed in base-10 positional notation
Terminating decimal: Decimal that ends after finite number of digits
Repeating decimal: Decimal with infinitely repeating pattern
- Identify number type: Determine if you're working with fraction, decimal, or integer
- Choose conversion method: Based on the operation needed
- Apply appropriate algorithm: Use division, multiplication, or algebraic method
- Follow order of operations: Apply PEMDAS/BODMAS correctly
- Simplify when possible: Reduce fractions and round decimals appropriately
- Verify result: Check if the answer makes sense
• Fraction to decimal: Divide numerator by denominator
• Decimal to fraction: Place over appropriate power of 10 and simplify
• Sign rules: Multiplication/division: even negatives = positive, odd = negative
• Terminating condition: Denominator has only factors of 2 and/or 5
• Order of operations: Always follow PEMDAS/BODMAS
• Comparison: Convert to same form for accurate comparison