Scale factor: The ratio of any length in the scaled copy to the corresponding length in the original figure. Scale factor = scaled length ÷ original length.
- Identify corresponding lengths in original and scaled copy
- Divide the scaled length by the original length
- Verify the scale factor works for all dimensions
- Interpret the result
Original: 4 cm × 6 cm
Scaled: 10 cm × 15 cm
Scale factor = Scaled length ÷ Original length = 10 ÷ 4 = 2.5
Scale factor = Scaled width ÷ Original width = 15 ÷ 6 = 2.5
Both dimensions give the same scale factor (2.5), confirming this is a proper scale copy
The scale factor from the original rectangle to the scaled copy is 2.5.
• Scale factor formula: Scale factor = scaled length ÷ original length
• Consistency: Scale factor must be the same for all corresponding dimensions
• Proportional relationship: All dimensions change by the same factor
Scale factor application: To find dimensions of a scaled copy, multiply each dimension of the original by the scale factor: scaled dimension = original dimension × scale factor.
Original side lengths: 8 cm, 12 cm, 16 cm
Scaled side 1 = 8 × 0.75 = 6 cm
Scaled side 2 = 12 × 0.75 = 9 cm
Scaled side 3 = 16 × 0.75 = 12 cm
Check: 6/8 = 9/12 = 12/16 = 0.75 ✓
The side lengths of the scaled triangle are 6 cm, 9 cm, and 12 cm.
• Scale factor multiplication: Scaled dimension = Original dimension × Scale factor
• Proportional scaling: All dimensions scale by the same factor
• Verification: Check that the ratios of corresponding sides equal the scale factor
Scale drawing: A drawing that represents an object with accurate proportions but a different size. The scale is a ratio comparing measurements in the drawing to actual measurements.
Scale factor = Actual distance ÷ Map distance = 10 miles ÷ 2 inches = 5 miles per inch
Actual distance = Map distance × Scale factor = 7 inches × 5 miles per inch = 35 miles
2 inches : 10 miles = 7 inches : 35 miles
2/10 = 7/35 → 1/5 = 1/5 ✓
The actual distance between the cities is 35 miles.
The actual distance between the cities is 35 miles.
• Scale factor: Actual measurement ÷ Scale measurement
• Proportional reasoning: Ratios of corresponding measurements are equal
• Unit conversion: Scale drawings convert between different units
Example: Scale factor = 3
Effect: Figure becomes larger
Ratio: Scaled size > Original size
Example: Scale factor = 0.5
Effect: Figure becomes smaller
Ratio: Scaled size < Original size
Example: Scale factor = 1
Effect: Figure stays the same size
Ratio: Scaled size = Original size
• Scale factor = 3 → Triples all dimensions
• Scale factor = 1.5 → Increases by 50%
• Perimeter increases by same factor
• Area increases by factor²
• Scale factor = 0.25 → Reduces to 25%
• Scale factor = 0.1 → Reduces to 10%
• Perimeter decreases by same factor
• Area decreases by factor²
Definitions:
- Scale factor: The ratio of a length in the scaled copy to the corresponding length in the original figure.
- Scale drawing: A drawing that represents an object with accurate proportions but a different size.
- Scale copy: A figure that has the same shape as the original but a different size.
- Similar figures: Figures that have the same shape but not necessarily the same size.
- Corresponding parts: Parts of figures that are in the same relative position.
Core Rules and Properties:
- Scale factor formula: Scale factor = scaled length ÷ original length
- Enlargement: Scale factor > 1 makes the figure larger
- Reduction: Scale factor < 1 makes the figure smaller
- Congruence: Scale factor = 1 means same size
- Proportional relationship: All corresponding lengths change by the same factor
Step-by-Step Methods:
- To find scale factor: Divide any scaled length by the corresponding original length.
- To find scaled dimensions: Multiply original dimensions by the scale factor.
- To find original dimensions: Divide scaled dimensions by the scale factor.
- To verify: Check that all corresponding lengths have the same ratio.
- To apply to real problems: Identify the scale and use proportional reasoning.
Examples:
- Simple: Original = 3, Scaled = 6 → Scale factor = 6/3 = 2
- Standard: Rectangle 2×4 scaled by 3 → New rectangle 6×12
- Advanced: Triangle sides 3, 4, 5 scaled by 0.5 → New triangle 1.5, 2, 2.5
- Real-world: Map scale 1:100,000 → 1 cm represents 1 km
Tips and Tricks:
- Always check that the scale factor is the same for all corresponding dimensions
- Remember that scale factors affect linear dimensions, not area or volume directly
- Use proportions to solve complex scale drawing problems
- Pay attention to units when working with scale drawings
Common Pitfalls:
- Using the wrong ratio (scaled/original vs original/scaled)
- Forgetting that all corresponding parts must scale by the same factor
- Confusing area/volume scaling with linear scaling
- Mixing up units in scale drawing problems
Key Takeaways:
- Scale factors describe how much larger or smaller a figure is compared to the original
- They preserve the shape while changing the size
- Scale factors apply to all linear dimensions equally
- They are fundamental to understanding similar figures and proportional relationships
Proportional: Having a constant ratio between corresponding parts
Similar figures: Figures that have the same shape but different sizes
Ratio: A comparison of two quantities by division
Proportion: An equation stating that two ratios are equal
- Identify: Find corresponding lengths in original and scaled figures
- Calculate: Divide scaled length by original length
- Verify: Check that all corresponding lengths have the same ratio
- Apply: Use the scale factor to find missing dimensions
- Interpret: Understand the meaning in context
• Scale factor: Scaled length ÷ Original length
• Linear scaling: All lengths change by the same factor
• Area scaling: Changes by factor²
• Volume scaling: Changes by factor³
Question: How do I know if a scale factor creates an enlargement or reduction? And what happens to the angles?
Answer: The scale factor determines whether the figure gets bigger or smaller:
- Enlargement: Scale factor > 1 (figure becomes larger)
- Reduction: Scale factor < 1 (figure becomes smaller)
- No change: Scale factor = 1 (figure stays the same size)
Regarding angles: The scale factor does NOT change the angles! When you scale a figure, all angles remain exactly the same. This is why the shapes are called "similar" - they have the same shape but different sizes. Only the lengths of sides change by the scale factor.
Question: My child is confused about how scale factors work with area. If the scale factor is 2, does the area also double?
Answer: No, the area does not double when the scale factor is 2. Here's how it works:
- Linear dimensions: Change by the scale factor (multiply by 2)
- Areas: Change by the square of the scale factor (multiply by 2² = 4)
- Volumes: Change by the cube of the scale factor (multiply by 2³ = 8)
For example, if you have a square with side length 3 (area = 9) and scale it by a factor of 2, the new square has side length 6 (area = 36). The area increased by a factor of 4 (36 ÷ 9 = 4), not 2!
Question: Can scale factors be fractions or decimals? What about negative numbers?
Answer: Scale factors can definitely be fractions or decimals:
- Fractions: 1/2 (reduces by half), 3/4 (reduces to 75%)
- Decimals: 0.5 (same as 1/2), 1.5 (increases by 50%)
For negative scale factors: In basic geometry, we typically use positive scale factors. However, negative scale factors do have meaning - they create a reflection in addition to scaling. For example, a scale factor of -2 would create a figure twice as large but reflected across the center point.
At the 7th-grade level, focus on positive scale factors. The important thing is that any positive number can be a scale factor.