Dilations and Similarity Transformations

Master dilations and similarity transformations: coordinate rules, properties, and real-world applications through these 5 detailed exercises with comprehensive solutions.

Solution: Exercises 1 to 3
1 Dilation with Origin Center
Exercise 1
Triangle ABC has vertices at A(2, 1), B(4, 3), and C(1, 4). Find the coordinates of triangle A'B'C' after a dilation with scale factor 3 centered at the origin.
Definition:

Dilation: A transformation that changes the size of a figure while preserving its shape

Scale factor: The multiplier applied to each coordinate in a dilation

Center of dilation: The fixed point from which the dilation occurs

Dilation Method:
  1. Identify the center of dilation (origin in this case)
  2. Identify the scale factor
  3. Multiply each coordinate by the scale factor
  4. Apply (x, y) → (kx, ky) where k is the scale factor
  5. Verify the resulting figure is similar to the original
Original
A(2,1), B(4,3), C(1,4)
Scale Factor
k = 3
Dilated
A'(6,3), B'(12,9), C'(3,12)
Step 1: Apply the dilation formula

For dilation centered at origin with scale factor k: (x, y) → (kx, ky)

Step 2: Find A' coordinates

A(2, 1) → A'(3×2, 3×1) = A'(6, 3)

Step 3: Find B' coordinates

B(4, 3) → B'(3×4, 3×3) = B'(12, 9)

Step 4: Find C' coordinates

C(1, 4) → C'(3×1, 3×4) = C'(3, 12)

Step 5: Verify similarity

Check that corresponding sides are proportional and angles are equal

A'(6,3), B'(12,9), C'(3,12)
Final answer:

The coordinates of the dilated triangle are A'(6,3), B'(12,9), and C'(3,12)

Applied rules:

• Dilation formula: (x, y) → (kx, ky) for origin-centered dilation

• Proportional sides: Each side of the image is k times the original

• Angle preservation: All angles remain the same

2 Dilation with Non-Origin Center
Exercise 2
Rectangle PQRS has vertices P(1, 2), Q(4, 2), R(4, 5), S(1, 5). Dilate the rectangle with scale factor 2 centered at point (2, 3). Find the new coordinates.
Definition:

Non-origin dilation: A dilation where the center is not at (0, 0)

Translation method: Move center to origin, dilate, move back

Original
P(1,2), Q(4,2), R(4,5), S(1,5)
Center
(2,3)
Scale Factor
2
Step 1: Translate center to origin

Subtract center coordinates from each vertex:

P': (1-2, 2-3) = (-1, -1)

Q': (4-2, 2-3) = (2, -1)

R': (4-2, 5-3) = (2, 2)

S': (1-2, 5-3) = (-1, 2)

Step 2: Apply dilation at origin

Multiply each translated coordinate by scale factor 2:

P'': 2(-1, -1) = (-2, -2)

Q'': 2(2, -1) = (4, -2)

R'': 2(2, 2) = (4, 4)

S'': 2(-1, 2) = (-2, 4)

Step 3: Translate back from origin

Add center coordinates back to each dilated vertex:

P''': (-2+2, -2+3) = (0, 1)

Q''': (4+2, -2+3) = (6, 1)

R''': (4+2, 4+3) = (6, 7)

S''': (-2+2, 4+3) = (0, 7)

Step 4: Verify the transformation

Check that distances from center scale by factor 2

P'(0,1), Q'(6,1), R'(6,7), S'(0,7)
Final answer:

The coordinates of the dilated rectangle are P'(0,1), Q'(6,1), R'(6,7), and S'(0,7)

Applied rules:

• Three-step process: Translate to origin → Dilate → Translate back

• Distance preservation: Distance from center scales by factor k

• Shape preservation: Rectangle properties maintained

3 Finding Scale Factor
Exercise 3
A triangle with vertices at (1, 1), (3, 1), and (2, 4) is dilated to form a triangle with vertices at (3, 3), (9, 3), and (6, 12). What is the scale factor and center of dilation?
Definition:

Scale factor: The ratio of any corresponding length in the image to the preimage

Center of dilation: The fixed point from which the dilation emanates

Preimage
(1,1), (3,1), (2,4)
Image
(3,3), (9,3), (6,12)
Scale Factor
3
Step 1: Calculate the scale factor using corresponding points

Take any pair of corresponding points, e.g. (1,1) and (3,3)

Compare distances from potential center

Step 2: Find the center of dilation

The center (h,k) satisfies: Image = Preimage + k(Center to Preimage)

For point (1,1) → (3,3): (3,3) = (1,1) + k((1,1) - (h,k))

Solving system of equations reveals center is (0,0)

Step 3: Verify the scale factor

From origin: (1,1) → (3,3), so k = 3

Check: (3,1) → (9,3): 3×3 = 9, 3×1 = 3 ✓

Step 4: Confirm the transformation

For origin-centered dilation: (x,y) → (kx,ky)

(2,4) → (3×2, 3×4) = (6,12) ✓

Scale factor = 3, Center = (0,0)
Final answer:

The scale factor is 3 and the center of dilation is at the origin (0,0)

Applied rules:

• Consistent ratios: All corresponding dimensions must scale by the same factor

• Center identification: Lines connecting corresponding vertices meet at center

• Verification: Check multiple point pairs to confirm

Dilations and Similarity Transformations: Rules and Methods
(x, y) \rightarrow (k(x-h) + h, k(y-v) + v)
Dilation Formula (Center at (h,v))
Origin Dilation
(x, y) → (kx, ky)
Dilation centered at origin
Translation
(x, y) → (x + a, y + b)
Movement in coordinate plane
Scale Factor
k = \frac{\text{new dimension}}{\text{original dimension}}
Multiplier for dilation
Key definitions:

Dilation: A transformation that changes the size of a figure while preserving its shape

Similarity transformation: A transformation that preserves shape but not necessarily size

Scale factor: The constant ratio of corresponding sides in similar figures

Center of dilation: The fixed point from which the dilation occurs

Similar figures: Figures that have the same shape but not necessarily the same size

Proportional relationship: A relationship where ratios of corresponding parts are equal

Dilation Analysis Method:
  1. Identify the center: Determine if it's at origin or another point
  2. Find the scale factor: Calculate the ratio of corresponding sides
  3. Apply the transformation: Use the appropriate formula
  4. Verify similarity: Check that angles are preserved and sides are proportional
  5. Confirm properties: Ensure the transformation maintains geometric relationships
Tip 1: For origin-centered dilations, simply multiply coordinates by scale factor.
Tip 2: For non-origin centers, translate to origin, dilate, then translate back.
Tip 3: A scale factor > 1 creates an enlargement; 0 < k < 1 creates a reduction.
Tip 4: Lines connecting corresponding vertices pass through the center of dilation.

Common errors: Forgetting to translate to/from origin for non-origin centers, confusing scale factor with translation, misidentifying corresponding parts.
Key features: Equal angles, proportional sides, same shape different size, center of dilation as fixed point.
Essential Dilation Rules:

• Origin dilation: (x, y) → (kx, ky)

• Non-origin dilation: Translate → Dilate → Translate back

• Shape preservation: All angles remain equal

• Proportionality: All corresponding sides have the same ratio

• Center behavior: Center of dilation remains fixed

Solution: Exercises 4 to 5
4 Real-world Application
Exercise 4
A rectangular garden measuring 6 feet by 8 feet is drawn on a plan with a scale of 1 inch = 2 feet. The drawing is then enlarged by a scale factor of 1.5. What are the dimensions of the final drawing?
Definition:

Scale drawing: A representation where measurements are proportionally reduced or enlarged

Compound transformation: Applying multiple transformations sequentially

Original Dimensions
6 ft × 8 ft
Plan Scale
1 in = 2 ft
Final Dimensions
4.5 in × 6 in
Step 1: Convert actual dimensions to drawing dimensions

Length: 8 ft ÷ 2 ft/inch = 4 inches

Width: 6 ft ÷ 2 ft/inch = 3 inches

Step 2: Apply the enlargement scale factor

New length: 4 inches × 1.5 = 6 inches

New width: 3 inches × 1.5 = 4.5 inches

Step 3: Verify the solution

Check: 6/4.5 = 8/6 = 4/3 (consistent ratio)

Step 4: State the final answer

The final drawing has dimensions 4.5 inches by 6 inches

Final dimensions: 4.5 in × 6 in
Final answer:

The final drawing measures 4.5 inches by 6 inches

Applied rules:

• Scale conversion: Actual ÷ Scale factor = Drawing measurement

• Sequential transformations: Apply transformations one at a time

• Proportionality: Maintain consistent ratios throughout

5 Complex Similarity Problem
Exercise 5
Pentagon ABCDE is similar to pentagon FGHIJ. If the scale factor from ABCDE to FGHIJ is 2.5 and the perimeter of ABCDE is 20 units, find the perimeter and area of FGHIJ if the area of ABCDE is 16 square units.
Definition:

Perimeter scaling: Perimeter changes by the scale factor

Area scaling: Area changes by the square of the scale factor

Given
k = 2.5, P₁ = 20, A₁ = 16
Find
P₂ = ?, A₂ = ?
Results
P₂ = 50, A₂ = 100
Step 1: Calculate the new perimeter

Perimeter scales linearly with the scale factor

P₂ = P₁ × k = 20 × 2.5 = 50 units

Step 2: Calculate the new area

Area scales with the square of the scale factor

A₂ = A₁ × k² = 16 × (2.5)² = 16 × 6.25 = 100 square units

Step 3: Verify the relationship

Check: A₂/A₁ = (P₂/P₁)² → 100/16 = (50/20)² → 6.25 = 6.25 ✓

Step 4: State the final answer

The perimeter of FGHIJ is 50 units and the area is 100 square units

Perimeter = 50 units, Area = 100 sq units
Final answer:

The perimeter of pentagon FGHIJ is 50 units and the area is 100 square units

Applied rules:

• Linear scaling: Perimeter × scale factor

• Area scaling: Area × (scale factor)²

• Dimension relationships: Area scales as square of linear dimensions

Dilations and Similarity: Comprehensive Guide
\text{Scale Factor} = \frac{\text{Image Dimension}}{\text{Original Dimension}}
Similarity Scale Factor
Key definitions:

Dilation: A transformation that changes the size of a figure while preserving its shape

Similar figures: Figures that have the same shape but not necessarily the same size

Scale factor: The constant ratio of corresponding sides in similar figures

Center of dilation: The fixed point from which the dilation occurs

Similarity transformation: A transformation that results in a similar figure

Proportional sides: Sides that have the same ratio in similar figures

Angle preservation: The property that corresponding angles remain equal in similar figures

Dilation and Similarity Analysis Method:
  1. Identify the transformation: Determine if it's a dilation or other similarity transformation
  2. Locate the center: Find the fixed point of the dilation
  3. Calculate the scale factor: Find the ratio of corresponding sides
  4. Apply the transformation: Use the appropriate formula based on center location
  5. Verify similarity: Check that angles are preserved and sides are proportional
Tip 1: Always verify that corresponding angles remain equal after transformation.
Tip 2: The scale factor is the same for all corresponding sides in similar figures.
Tip 3: For area calculations, multiply by (scale factor)².
Tip 4: Remember that angles never change in similar figures, only side lengths do.

Common errors: Mixing up corresponding sides, forgetting to apply scale factor to both coordinates, misidentifying the center of dilation.
Key features: Equal angles, proportional sides, same shape different size, center of dilation as fixed point.
Essential Similarity Rules:

• Dilation formula: (x, y) → (kx, ky) for origin-centered dilation

• Proportional sides: All corresponding sides have the same ratio

• Angle preservation: All corresponding angles are equal

• Scale factor: k = new dimension/original dimension

• Area relationship: Area scales by k²

• Perimeter relationship: Perimeter scales by k

Effects of Different Scale Factors
Exercise 6: Scale Factor Impact
Compare how different scale factors affect linear dimensions, areas, and perimeters:
Scale factor 2: Linear ×2, Area ×4, Perimeter ×2
Scale factor 3: Linear ×3, Area ×9, Perimeter ×3
Scale factor 0.5: Linear ×0.5, Area ×0.25, Perimeter ×0.5

Analysis: The chart shows how different scale factors affect various measurements in dilations.

  • Linear dimensions scale by the scale factor
  • Areas scale by the square of the scale factor
  • Perimeters scale by the scale factor

Questions & Answers

Question: How do I know if a transformation is a dilation?

Answer: A transformation is a dilation if:

  • Shape preservation: The figure maintains its shape (all angles remain equal)
  • Proportional sides: All corresponding sides change by the same ratio
  • Fixed point: There is a center of dilation that may or may not move
  • Uniform scaling: The figure gets larger or smaller uniformly

Check that the ratio of any corresponding sides is constant throughout the figure.

Question: What happens to the area when a figure is dilated?

Answer: When a figure is dilated by scale factor k, the area changes by a factor of k²:

  • Linear dimensions: Multiply by k
  • Areas: Multiply by k²
  • Perimeters: Multiply by k

Example: If a rectangle with area 10 is dilated by scale factor 3:

New area = 10 × 3² = 10 × 9 = 90

This is because area involves two dimensions, both of which scale by k.

Question: Can the scale factor be negative? What does that mean?

Answer: Yes, scale factors can be negative, which creates a dilation combined with a reflection:

  • Positive scale factor: Figure gets larger/smaller in the same orientation
  • Negative scale factor: Figure gets larger/smaller and flips across the center

Example: Scale factor of -2 means the figure is twice as large but reflected across the center of dilation.

For 7th grade, focus on positive scale factors unless otherwise specified.