Similar Figures and Scale Factors

Master similar figures and scale factors: properties, calculations, and applications through these 5 detailed exercises with comprehensive solutions.

Solution: Exercises 1 to 3
1 Identifying Similar Figures
Exercise 1
Triangle ABC has sides of length 3, 4, and 5. Triangle DEF has sides of length 6, 8, and 10. Are the triangles similar? If so, find the scale factor.
Definition:

Similar figures: Figures that have the same shape but not necessarily the same size

Scale factor: The ratio of corresponding sides in similar figures

Corresponding sides: Sides in the same relative position in similar figures

Similarity Identification Method:
  1. Identify corresponding sides in both figures
  2. Calculate the ratio of corresponding sides
  3. Check if all ratios are equal
  4. If ratios are equal, the figures are similar
  5. The common ratio is the scale factor
Triangle ABC
3, 4, 5
Triangle DEF
6, 8, 10
Scale Factor
2
Step 1: Identify corresponding sides

Assuming corresponding sides are in order:

Side AB corresponds to side DE

Side BC corresponds to side EF

Side AC corresponds to side DF

Step 2: Calculate ratios of corresponding sides

DE/AB = 6/3 = 2

EF/BC = 8/4 = 2

DF/AC = 10/5 = 2

Step 3: Check if ratios are equal

All ratios equal 2, so the triangles are similar

Step 4: Identify the scale factor

Scale factor = 2 (DEF is 2 times larger than ABC)

Triangles are similar, Scale factor = 2
Final answer:

Yes, the triangles are similar with a scale factor of 2

Applied rules:

• Similarity test: Ratios of corresponding sides must be equal

• Scale factor: Common ratio of corresponding sides

• Proportional relationship: All corresponding sides have the same ratio

2 Finding Missing Side Lengths
Exercise 2
Rectangle ABCD is similar to rectangle EFGH. If AB = 4 cm, BC = 6 cm, and EF = 10 cm, find the length of FG.
Definition:

Proportional sides: In similar figures, corresponding sides are proportional

Similar rectangles: Rectangles with the same shape but different sizes

Given
AB = 4, BC = 6, EF = 10
Find
FG = ?
Scale Factor
2.5
Step 1: Identify corresponding sides

AB corresponds to EF

BC corresponds to FG

Step 2: Find the scale factor

Scale factor = EF/AB = 10/4 = 2.5

Step 3: Use the scale factor to find FG

FG = BC × Scale factor

FG = 6 × 2.5 = 15

Step 4: Verify the solution

Check: EF/AB = FG/BC

10/4 = 15/6 → 2.5 = 2.5 ✓

FG = 15 cm
Final answer:

The length of FG is 15 cm

Applied rules:

• Proportional sides: Corresponding sides are in the same ratio

• Scale factor: Multiply by scale factor to find corresponding sides

• Verification: Check that ratios of corresponding sides are equal

3 Scale Factor Applications
Exercise 3
A square with side length 5 cm is dilated by a scale factor of 3. Find the side length, perimeter, and area of the new square.
Definition:

Dilation: A transformation that changes the size of a figure while preserving its shape

Scale factor: The multiplier used to change the size of the figure

Original Side
5 cm
Scale Factor
3
Results
Side: 15 cm, Perimeter: 60 cm, Area: 225 cm²
Step 1: Find the new side length

New side = Original side × Scale factor

New side = 5 × 3 = 15 cm

Step 2: Find the new perimeter

Original perimeter = 4 × 5 = 20 cm

New perimeter = 4 × 15 = 60 cm

Or: New perimeter = Original perimeter × Scale factor = 20 × 3 = 60 cm

Step 3: Find the new area

Original area = 5² = 25 cm²

New area = 15² = 225 cm²

Or: New area = Original area × (Scale factor)² = 25 × 3² = 25 × 9 = 225 cm²

Step 4: Observe the patterns

Linear dimensions (side, perimeter) multiply by the scale factor

Areas multiply by (scale factor)²

Side: 15 cm, Perimeter: 60 cm, Area: 225 cm²
Final answer:

The new square has side length 15 cm, perimeter 60 cm, and area 225 cm²

Applied rules:

• Linear scaling: Side lengths multiply by scale factor

• Area scaling: Areas multiply by (scale factor)²

• Volume scaling: Volumes multiply by (scale factor)³

Similar Figures and Scale Factors: Rules and Methods
\text{Scale Factor} = \frac{\text{New Dimension}}{\text{Original Dimension}}
Scale Factor Formula
Linear Scaling
New = Original × Scale Factor
Side lengths, perimeter, etc.
Area Scaling
New Area = Original × (Scale Factor)²
Area changes by square of scale factor
Volume Scaling
New Volume = Original × (Scale Factor)³
Volume changes by cube of scale factor
Key definitions:

Similar figures: Geometric figures that have the same shape but not necessarily the same size

Scale factor: The ratio of corresponding sides in similar figures

Corresponding sides: Sides that are in the same relative position in similar figures

Corresponding angles: Angles that are in the same relative position in similar figures

Proportion: An equation stating that two ratios are equal

Dilation: A transformation that changes the size of a figure while preserving its shape

Similar Figures Analysis Method:
  1. Identify corresponding parts: Match sides and angles in both figures
  2. Calculate ratios: Find the ratio of corresponding sides
  3. Check for equality: Verify that all ratios are equal
  4. Determine scale factor: Use the common ratio
  5. Apply to unknowns: Use scale factor to find missing measurements
Tip 1: In similar figures, corresponding angles are always equal.
Tip 2: Scale factor is the multiplier to go from original to new figure.
Tip 3: If scale factor > 1, the figure gets larger; if < 1, it gets smaller.
Tip 4: Area changes by the square of the scale factor, volume by the cube.

Common errors: Mixing up corresponding sides, forgetting to square scale factor for areas, confusing scale factor direction (original to new vs new to original).
Key properties: Equal corresponding angles, proportional corresponding sides, same shape but different sizes.
Essential Similarity Rules:

• Angle preservation: Corresponding angles are equal

• Side proportionality: Corresponding sides are in the same ratio

• Scale factor: Common ratio of corresponding sides

• Area relationship: Area ratio = (Scale factor)²

• Volume relationship: Volume ratio = (Scale factor)³

Solution: Exercises 4 to 5
4 Real-world Application
Exercise 4
A model car is built at a scale of 1:24. If the model is 6 inches long, how long is the actual car in feet?
Definition:

Scale ratio: The ratio of model size to actual size (written as 1:n)

Proportional relationship: Model/Actual = Scale ratio

Scale
1:24
Model Length
6 inches
Actual Length
144 inches = 12 feet
Step 1: Set up the proportion

Model/Actual = 1/24

6/Actual = 1/24

Step 2: Cross multiply

6 × 24 = 1 × Actual

144 = Actual

Step 3: Convert to feet

144 inches = 144 ÷ 12 = 12 feet

Step 4: Verify the solution

Check: 6/144 = 1/24 → 1/24 = 1/24 ✓

Actual car length = 12 feet
Final answer:

The actual car is 12 feet long

Applied rules:

• Scale proportion: Model/Actual = Scale ratio

• Unit conversion: 12 inches = 1 foot

• Cross multiplication: Solve proportions by cross multiplying

5 Area Relationships
Exercise 5
Two similar triangles have a scale factor of 2:3. If the area of the smaller triangle is 18 square units, what is the area of the larger triangle?
Definition:

Area scaling: When linear dimensions change by a scale factor, areas change by the square of that factor

Ratio of areas: Equals the square of the ratio of corresponding sides

Scale Factor
2:3
Area Ratio
4:9
Larger Area
40.5 sq units
Step 1: Identify the scale factor

Scale factor (smaller to larger) = 2:3

Step 2: Find the area ratio

Area ratio = (Scale factor)² = (2/3)² = 4/9

Step 3: Set up the proportion

Smaller area/Larger area = 4/9

18/Larger area = 4/9

Step 4: Solve for the larger area

18 × 9 = 4 × Larger area

162 = 4 × Larger area

Larger area = 162/4 = 40.5

Step 5: Verify the solution

Check: 18/40.5 = 4/9 → 2/4.5 = 4/9 → 4/9 = 4/9 ✓

Larger triangle area = 40.5 square units
Final answer:

The area of the larger triangle is 40.5 square units

Applied rules:

• Area scaling: Area ratio = (Linear scale factor)²

• Proportional relationship: Smaller area/Larger area = Area ratio

• Cross multiplication: Solve for unknown in proportions

Similar Figures and Scale Factors: Comprehensive Guide
\text{Scale Factor} = \frac{\text{New Dimension}}{\text{Original Dimension}}
Scale Factor Formula
Key definitions:

Similar figures: Geometric figures that have the same shape but not necessarily the same size

Scale factor: The constant ratio of corresponding sides in similar figures

Corresponding parts: Sides or angles that are in the same relative position in similar figures

Proportion: An equation stating that two ratios are equal

Dilation: A transformation that changes the size of a figure while preserving its shape

Similarity ratio: The ratio of corresponding sides in similar figures

Area ratio: The ratio of corresponding areas in similar figures

Complete Similar Figures Methodology:
  1. Identify the figures: Determine if the shapes are similar
  2. Match corresponding parts: Pair up sides and angles that are in the same position
  3. Calculate the scale factor: Find the ratio of any pair of corresponding sides
  4. Verify similarity: Check that all corresponding sides have the same ratio
  5. Apply the scale factor: Use it to find missing measurements
  6. Handle area/volume: Remember area scales by (scale factor)² and volume by (scale factor)³
  7. Check your work: Verify that all ratios are consistent
Tip 1: Always identify corresponding parts before doing any calculations.
Tip 2: In similar figures, all corresponding angles are equal.
Tip 3: If scale factor > 1, the image is larger; if 0 < scale factor < 1, the image is smaller.
Tip 4: Remember that area changes by the square of the scale factor, not the scale factor itself.

Common errors: Confusing corresponding sides, forgetting to square scale factor for areas, misidentifying the scale factor direction, mixing up units.
Exam preparation: Practice identifying corresponding parts, master area and volume scaling relationships, understand real-world applications like maps and models.

Similar Figures Formulas to Remember:

• Scale factor: k = New/Original

• Linear dimensions: New = Original × k

• Areas: New Area = Original Area × k²

• Volumes: New Volume = Original Volume × k³

• Similarity test: All corresponding sides must have the same ratio

• Angle preservation: Corresponding angles are always equal

Scale Factor Effects on Measurements
Exercise 6: Comparing Different Scale Factors
Compare how different scale factors affect linear, area, and volume measurements:
Scale factor 2: Linear ×2, Area ×4, Volume ×8
Scale factor 3: Linear ×3, Area ×9, Volume ×27

Analysis: The chart shows how different scale factors affect various measurements.

  • Linear dimensions change by the scale factor
  • Areas change by the square of the scale factor
  • Volumes change by the cube of the scale factor

Questions & Answers

Question: How do I know which sides correspond to each other in similar figures?

Answer: Look for sides that are in the same relative position in both figures:

  • Order of vertices: If ΔABC ~ ΔDEF, then AB corresponds to DE, BC to EF, and AC to DF
  • Relative position: Longest side corresponds to longest side, shortest to shortest
  • Adjacent angles: Sides between the same angles correspond to each other

If figures are labeled with vertices, match them in the same order. If not, look for sides that are between the same angles or have the same relative position.

Question: Why do areas change by the square of the scale factor instead of just the scale factor?

Answer: Area is a two-dimensional measurement, so both dimensions are affected by the scale factor:

  • Rectangle area: A = length × width
  • If both dimensions are scaled by k: New area = (k × length) × (k × width) = k² × (length × width)
  • So: New area = Original area × k²

Since area involves multiplying two linear dimensions, and each dimension is multiplied by the scale factor, the area is multiplied by the scale factor twice (k × k = k²).

For volume (3D), it's k³ because all three dimensions are scaled.

Question: Can scale factors be less than 1? What does that mean?

Answer: Yes, scale factors can definitely be less than 1, which means the figure is getting smaller:

  • Scale factor > 1: Figure gets larger (enlargement)
  • Scale factor = 1: Figure stays the same size (congruent)
  • Scale factor < 1: Figure gets smaller (reduction)

Examples:

  • Scale factor of 2: Figure doubles in size
  • Scale factor of 0.5: Figure becomes half the size
  • Scale factor of 0.25: Figure becomes one quarter the size

A scale factor of 0.5 is the same as 1/2, meaning the new figure is 1/2 the size of the original.