Similarity in Coordinate Plane

Master similarity transformations in coordinate plane: dilations, translations, and properties through these 5 detailed exercises with comprehensive solutions.

Solution: Exercises 1 to 3
1 Dilation with Center at Origin
Exercise 1
Triangle ABC has vertices at A(2, 3), B(4, 1), and C(1, 5). Find the coordinates of triangle A'B'C' after a dilation with scale factor 2 centered at the origin.
Definition:

Dilation: A transformation that changes the size of a figure while preserving its shape

Scale factor: The multiplier applied to each coordinate in a dilation

Center of dilation: The fixed point from which the dilation occurs

Dilation Method:
  1. Identify the center of dilation (origin in this case)
  2. Identify the scale factor
  3. Multiply each coordinate by the scale factor
  4. Apply (x, y) → (kx, ky) where k is the scale factor
  5. Verify the resulting figure is similar to the original
Original
A(2,3), B(4,1), C(1,5)
Scale Factor
k = 2
Dilated
A'(4,6), B'(8,2), C'(2,10)
Step 1: Apply the dilation formula

For dilation centered at origin with scale factor k: (x, y) → (kx, ky)

Step 2: Find A' coordinates

A(2, 3) → A'(2×2, 3×2) = A'(4, 6)

Step 3: Find B' coordinates

B(4, 1) → B'(4×2, 1×2) = B'(8, 2)

Step 4: Find C' coordinates

C(1, 5) → C'(1×2, 5×2) = C'(2, 10)

Step 5: Verify similarity

Check that corresponding sides are proportional and angles are equal

A'(4,6), B'(8,2), C'(2,10)
Final answer:

The coordinates of the dilated triangle are A'(4,6), B'(8,2), and C'(2,10)

Applied rules:

• Dilation formula: (x, y) → (kx, ky) for origin-centered dilation

• Proportional sides: Each side of the image is k times the original

• Angle preservation: All angles remain the same

2 Verifying Similarity
Exercise 2
Rectangle PQRS has vertices P(1, 2), Q(5, 2), R(5, 6), S(1, 6). Rectangle P'Q'R'S' has vertices P'(2, 4), Q'(10, 4), R'(10, 12), S'(2, 12). Are these rectangles similar? If so, what is the scale factor?
Definition:

Similar figures: Figures with equal corresponding angles and proportional corresponding sides

Scale factor: The ratio of corresponding sides in similar figures

Original
P(1,2), Q(5,2), R(5,6), S(1,6)
New
P'(2,4), Q'(10,4), R'(10,12), S'(2,12)
Scale Factor
2
Step 1: Calculate side lengths of PQRS

PQ = 5 - 1 = 4, QR = 6 - 2 = 4

PS = 6 - 2 = 4, SR = 5 - 1 = 4

Wait, this is a square! Let me recalculate:

PQ = 4 (horizontal), QR = 4 (vertical)

Step 2: Calculate side lengths of P'Q'R'S'

P'Q' = 10 - 2 = 8, Q'R' = 12 - 4 = 8

P'S' = 12 - 4 = 8, S'R' = 10 - 2 = 8

Step 3: Compare ratios of corresponding sides

PQ/P'Q' = 4/8 = 1/2

QR/Q'R' = 4/8 = 1/2

All ratios equal 1/2, so they are similar

Step 4: Verify angles are equal

Both figures are rectangles, so all angles are 90°

Rectangles are similar, Scale factor = 2
Final answer:

Yes, the rectangles are similar with a scale factor of 2

Applied rules:

• Side comparison: Check if all corresponding sides are proportional

• Angle check: Verify corresponding angles are equal

• Scale factor: Common ratio of corresponding sides

3 Finding Scale Factor
Exercise 3
A triangle with vertices at (2, 4), (6, 4), and (4, 8) is dilated to form a triangle with vertices at (4, 8), (12, 8), and (8, 16). What is the scale factor of the dilation?
Definition:

Scale factor: The ratio of any corresponding length in the image to the preimage

Dilation center: The fixed point from which the dilation emanates

Preimage
(2,4), (6,4), (4,8)
Image
(4,8), (12,8), (8,16)
Scale Factor
2
Step 1: Calculate the scale factor using corresponding points

Take any pair of corresponding points, e.g. (2,4) and (4,8)

Scale factor = x-image/x-preimage = 4/2 = 2

Scale factor = y-image/y-preimage = 8/4 = 2

Step 2: Verify with other points

For (6,4) → (12,8): 12/6 = 2, 8/4 = 2 ✓

For (4,8) → (8,16): 8/4 = 2, 16/8 = 2 ✓

Step 3: Check if dilation is centered at origin

Verify: (2,4) × 2 = (4,8) ✓

This confirms dilation is centered at origin

Step 4: State the conclusion

Since all ratios are equal to 2, the scale factor is 2

Scale factor = 2
Final answer:

The scale factor of the dilation is 2

Applied rules:

• Consistent ratios: All corresponding dimensions must scale by the same factor

• Verification: Check multiple point pairs to confirm

• Origin-centered: When dilation center is at origin, (x,y) → (kx,ky)

Similarity in Coordinate Plane: Rules and Methods
(x, y) \rightarrow (kx, ky)
Dilation Formula (Origin Center)
Translation
(x, y) → (x + a, y + b)
Movement in coordinate plane
Dilation
(x, y) → (kx, ky)
Scaling with respect to origin
Scale Factor
k = \frac{\text{new dimension}}{\text{original dimension}}
Multiplier for dilation
Key definitions:

Similar figures: Figures that have the same shape but not necessarily the same size

Dilation: A transformation that enlarges or reduces a figure by a scale factor

Scale factor: The ratio of the image size to the original size

Corresponding parts: Parts of similar figures that are in the same relative position

Coordinate plane: A two-dimensional grid formed by x-axis and y-axis

Ordered pair: A pair of numbers (x, y) that represents a point on the coordinate plane

Coordinate Plane Similarity Method:
  1. Identify the transformation: Determine if it's translation, rotation, reflection, or dilation
  2. For dilations: Apply the scale factor to each coordinate
  3. Compare corresponding sides: Check if ratios are equal
  4. Verify angles: Confirm that corresponding angles are equal
  5. State the scale factor: Calculate the constant of proportionality
Tip 1: In a dilation centered at origin, each coordinate is multiplied by the scale factor.
Tip 2: Similar figures have equal corresponding angles and proportional corresponding sides.
Tip 3: If scale factor > 1, the image is larger; if 0 < scale factor < 1, the image is smaller.
Tip 4: Always check multiple pairs of corresponding sides to confirm similarity.

Common errors: Forgetting to apply scale factor to both coordinates, confusing translation with dilation, misidentifying corresponding parts.
Key features: Equal angles, proportional sides, same shape different size.
Essential Similarity Rules:

• Dilation formula: (x, y) → (kx, ky) for origin-centered dilation

• Proportional sides: All corresponding sides have the same ratio

• Equal angles: All corresponding angles are congruent

• Scale factor: k = new dimension/original dimension

Solution: Exercises 4 to 5
4 Real-world Application
Exercise 4
A city planner creates a map where 1 unit represents 100 feet. A park on the map has vertices at (0, 0), (5, 0), (5, 3), and (0, 3). What is the actual area of the park in square feet?
Definition:

Scale drawing: A representation where measurements are proportionally reduced or enlarged

Area scaling: Area changes by the square of the scale factor

Map Dimensions
5 units × 3 units
Scale
1 unit = 100 ft
Actual Area
150,000 ft²
Step 1: Calculate the map area

Map area = length × width = 5 × 3 = 15 square units

Step 2: Find the scale factor for area

Linear scale factor = 100 (since 1 unit = 100 ft)

Area scale factor = (100)² = 10,000

Step 3: Calculate the actual area

Actual area = Map area × Area scale factor

Actual area = 15 × 10,000 = 150,000 square feet

Step 4: Verify the calculation

Actual dimensions: (5×100) × (3×100) = 500 × 300 = 150,000 ft² ✓

Actual area = 150,000 square feet
Final answer:

The actual area of the park is 150,000 square feet

Applied rules:

• Area scaling: Area scales by (scale factor)²

• Dimension conversion: Apply scale factor to linear dimensions first

• Verification: Check by calculating actual dimensions separately

5 Complex Similarity Problem
Exercise 5
Pentagon ABCDE is similar to pentagon FGHIJ. If the coordinates of ABCDE are A(1,1), B(3,1), C(4,3), D(2,4), E(0,3) and the scale factor is 3, find the coordinates of pentagon FGHIJ.
Definition:

Similar polygons: Polygons with equal corresponding angles and proportional corresponding sides

Vertex correspondence: Vertices in the same relative position in similar figures

Original Vertices
A(1,1), B(3,1), C(4,3), D(2,4), E(0,3)
Scale Factor
k = 3
New Vertices
F(3,3), G(9,3), H(12,9), I(6,12), J(0,9)
Step 1: Apply the dilation formula to each vertex

For each point (x, y), the new point is (3x, 3y)

Step 2: Calculate each new coordinate

A(1,1) → F(3×1, 3×1) = F(3,3)

B(3,1) → G(3×3, 3×1) = G(9,3)

C(4,3) → H(3×4, 3×3) = H(12,9)

D(2,4) → I(3×2, 3×4) = I(6,12)

E(0,3) → J(3×0, 3×3) = J(0,9)

Step 3: Verify the transformation

Check that corresponding sides are in the ratio 3:1

Example: Distance AB compared to distance FG

Step 4: Confirm similarity

Both pentagons have the same shape but different sizes

All corresponding angles are preserved

F(3,3), G(9,3), H(12,9), I(6,12), J(0,9)
Final answer:

The coordinates of pentagon FGHIJ are F(3,3), G(9,3), H(12,9), I(6,12), and J(0,9)

Applied rules:

• Dilation application: Multiply each coordinate by scale factor

• Vertex correspondence: Maintain the same order of vertices

• Similarity preservation: Shape remains the same, size changes proportionally

Similarity in Coordinate Plane: Comprehensive Guide
\text{Scale Factor} = \frac{\text{Image Dimension}}{\text{Original Dimension}}
Similarity Scale Factor
Key definitions:

Similar figures: Geometric figures that have the same shape but not necessarily the same size

Dilation: A transformation that changes the size of a figure while preserving its shape

Scale factor: The constant ratio of corresponding sides in similar figures

Corresponding parts: Sides or angles that are in the same relative position in similar figures

Coordinate transformation: Changing the coordinates of a figure according to a rule

Proportional relationship: A relationship where ratios of corresponding measurements are equal

Similarity transformation: A transformation that results in a similar figure

Coordinate Plane Similarity Analysis Method:
  1. Identify the transformation: Determine what type of similarity transformation is applied
  2. Locate corresponding vertices: Match vertices in the same relative position
  3. Calculate the scale factor: Find the ratio of corresponding sides
  4. Apply the transformation: Use the scale factor to find new coordinates
  5. Verify similarity: Check that angles are preserved and sides are proportional
Tip 1: Always verify that corresponding angles are equal in similar figures.
Tip 2: The scale factor is the same for all corresponding sides in similar figures.
Tip 3: For area calculations, multiply by (scale factor)².
Tip 4: In coordinate dilations centered at origin, multiply each coordinate by the scale factor.

Common errors: Mixing up corresponding sides, forgetting to square scale factor for areas, misapplying transformation rules.
Key features: Equal angles, proportional sides, same shape different size.
Essential Similarity Rules:

• Equal angles: Corresponding angles in similar figures are always equal

• Proportional sides: Corresponding sides have the same ratio

• Dilation formula: (x, y) → (kx, ky) for origin-centered dilation

• Scale factor: k = new dimension/original dimension

• Area relationship: Area scales by k²

• Perimeter relationship: Perimeter scales by k

Scale Factor Effects on Similar Figures
Exercise 6: Linear vs Area Scaling
Compare how different scale factors affect linear dimensions and areas:
Scale factor 2: Linear ×2, Area ×4
Scale factor 3: Linear ×3, Area ×9
Scale factor 0.5: Linear ×0.5, Area ×0.25

Analysis: The chart shows how scale factors affect different measurements in similar figures.

  • Linear dimensions scale by the scale factor
  • Areas scale by the square of the scale factor
  • Angles remain unchanged

Questions & Answers

Question: How do I know if two figures on a coordinate plane are similar?

Answer: To determine if two figures are similar, check both conditions:

  • Equal angles: All corresponding angles must be equal
  • Proportional sides: All corresponding sides must have the same ratio

For coordinate figures:

  1. Calculate the lengths of corresponding sides
  2. Check if all ratios of corresponding sides are equal
  3. Verify that the shapes have the same number of sides and similar appearance

If both conditions are met, the figures are similar.

Question: What happens to the area when a figure is dilated by a scale factor?

Answer: When a figure is dilated by a scale factor k, the area changes by a factor of k²:

  • Linear dimensions: Multiply by k
  • Areas: Multiply by k²
  • Volumes: Multiply by k³ (for 3D figures)

Example: If a rectangle with area 10 is dilated by scale factor 3:

New area = 10 × 3² = 10 × 9 = 90

This is because area involves two dimensions, both of which are scaled by k.

Question: Can the scale factor be a fraction? What does that mean?

Answer: Yes, scale factors can be fractions, which means the figure gets smaller:

  • Scale factor > 1: Figure gets larger (enlargement)
  • Scale factor = 1: Figure stays the same size (congruent)
  • Scale factor < 1: Figure gets smaller (reduction)

Examples:

  • Scale factor of 2: Figure doubles in size
  • Scale factor of 1/2: Figure becomes half the size
  • Scale factor of 3/4: Figure becomes 3/4 the size

A scale factor of 1/2 is the same as 0.5, meaning each coordinate becomes half of its original value.