Solved Exercises on Dilations and Similarity in Grade 7

Master dilations and similarity: scale factors, proportional relationships, and geometric properties through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Dilation
Exercise 1
Triangle ABC has vertices A(2, 1), B(4, 3), C(1, 4). Dilate the triangle with a scale factor of 2 centered at the origin. Find the new coordinates.
Definition:

Dilation: A transformation that changes the size of a figure by multiplying all coordinates by the same scale factor. The shape remains similar, but the size changes.

Dilation method:
  1. Identify the scale factor and center of dilation
  2. Multiply each coordinate by the scale factor
  3. Plot the new points and connect them
  4. Verify that the new figure is similar to the original
Original points
A(2,1), B(4,3), C(1,4)
Scale factor
2
New coordinates
A'(4,2), B'(8,6), C'(2,8)
Step 1: Identify the dilation parameters

Scale factor = 2, Center of dilation = Origin (0,0)

Step 2: Apply the dilation formula

For dilation centered at origin with scale factor k: (x,y) → (kx, ky)

For A(2,1): A'(2×2, 1×2) = A'(4,2)

For B(4,3): B'(4×2, 3×2) = B'(8,6)

For C(1,4): C'(1×2, 4×2) = C'(2,8)

Step 3: Verify the dilation

Each coordinate was multiplied by 2

Shape remains similar but size increased

A'(4,2), B'(8,6), C'(2,8)
Final answer:

The dilated triangle has vertices A'(4,2), B'(8,6), and C'(2,8).

Applied rules:

• Dilation formula: (x,y) → (kx, ky) for center at origin

• Scale factor: Multiplies all distances from center of dilation

• Similarity preservation: Angles remain the same, sides are proportional

2 Finding Scale Factor
Exercise 2
Rectangle PQRS has vertices P(1, 1), Q(3, 1), R(3, 2), S(1, 2). The dilated rectangle P'Q'R'S' has vertices P'(3, 3), Q'(9, 3), R'(9, 6), S'(3, 6). Find the scale factor.
Definition:

Scale factor: The ratio of corresponding lengths in similar figures. It describes how much a figure has been enlarged or reduced during a dilation.

Original length
PQ = 2 units
New length
P'Q' = 6 units
Scale factor
3
Step 1: Calculate original dimensions

PQ = 3 - 1 = 2 units (length)

PS = 2 - 1 = 1 unit (width)

Step 2: Calculate dilated dimensions

P'Q' = 9 - 3 = 6 units (length)

P'S' = 6 - 3 = 3 units (width)

Step 3: Find the scale factor

Scale factor = New length ÷ Original length

Scale factor = 6 ÷ 2 = 3

Check: Width scale = 3 ÷ 1 = 3 ✓

Step 4: Verify with coordinates

P(1,1) → P'(3,3): (1×3, 1×3) ✓

Q(3,1) → Q'(9,3): (3×3, 1×3) ✓

Scale factor = 3
Final answer:

The scale factor is 3.

Applied rules:

• Scale factor formula: Scale factor = Image length ÷ Pre-image length

• Consistency: Scale factor is the same for all corresponding sides

• Coordinate verification: Each coordinate is multiplied by the same factor

3 Dilation with Center Other Than Origin
Exercise 3
Point D(5, 7) is dilated with a scale factor of 0.5 centered at point C(2, 3). Find the coordinates of the dilated point D'.
Definition:

Dilation with arbitrary center: When the center of dilation is not the origin, we first translate the figure so the center moves to the origin, apply the dilation, then translate back.

Original point
D(5, 7)
Center of dilation
C(2, 3)
Scale factor
0.5
Step 1: Translate so center is at origin

Translate by (-2, -3) to move C to origin

D(5,7) → D'(5-2, 7-3) = D'(3, 4)

Step 2: Apply dilation with scale factor 0.5

D'(3,4) → D''(3×0.5, 4×0.5) = D''(1.5, 2)

Step 3: Translate back by (2, 3)

D''(1.5, 2) → D'''(1.5+2, 2+3) = D'''(3.5, 5)

Step 4: Verify the result

Distance from C(2,3) to D(5,7): √[(5-2)² + (7-3)²] = √[9+16] = 5

Distance from C(2,3) to D'(3.5,5): √[(3.5-2)² + (5-3)²] = √[2.25+4] = √6.25 = 2.5

2.5 = 0.5 × 5 ✓

D'(3.5, 5)
Final answer:

The dilated point D' has coordinates (3.5, 5).

Applied rules:

• Translation method: Move center to origin, dilate, move back

• Distance relationship: Distances from center of dilation are scaled by the scale factor

• Scale factor application: New distance = Scale factor × Original distance

Complete Guide to Dilations and Similarity - Laws, Methods, Rules, Definitions
\( D_{(k,C)}: (x,y) \rightarrow (k(x-h)+h, k(y-k)+k) \)
Dilation Formula (center at (h,k))
Formula 1
Dilation at Origin
(x,y) → (kx, ky)
Formula 2
Scale Factor
k = Image length ÷ Pre-image length
Formula 3
Dilation at (h,k)
(x,y) → (k(x-h)+h, k(y-k)+k)
Key definitions:

Dilation: A transformation that enlarges or reduces a figure by a scale factor relative to a fixed point called the center of dilation

Scale factor: The ratio that determines how much a figure is enlarged or reduced

Similar figures: Figures that have the same shape but not necessarily the same size; corresponding angles are equal and corresponding sides are proportional

Center of dilation: The fixed point from which all distances are measured and scaled

Complete methodology:
  1. Identify dilation parameters: Scale factor and center of dilation
  2. Apply the appropriate formula: Based on center location
  3. Transform each point: Apply the transformation to all vertices
  4. Verify similarity: Check that corresponding angles are equal and sides are proportional
Tip 1: Scale factors greater than 1 enlarge the figure, between 0 and 1 shrink it.
Tip 2: Negative scale factors create a reflection in addition to size change.
Tip 3: Always multiply coordinates by the scale factor, don't add to them.
Tip 4: For centers other than origin, use the translation method: translate to origin, dilate, translate back.
Common errors: Forgetting to multiply both coordinates by the scale factor, confusing enlargement with reduction, not accounting for center of dilation when it's not the origin.
Key patterns: Dilations preserve angle measures, distances from center are scaled by the scale factor, parallel lines remain parallel.
Essential formulas and rules:

• Dilation at origin: (x,y) → (kx, ky)

• Dilation at (h,k): (x,y) → (k(x-h)+h, k(y-k)+k)

• Scale factor: k = image length ÷ pre-image length

• Similarity: Corresponding angles equal, sides proportional

Solution: Exercises 4 to 5
4 Similarity Problem
Exercise 4
Triangle XYZ has sides of length 6 cm, 8 cm, and 10 cm. Triangle UVW is similar to XYZ and has the shortest side of length 9 cm. Find the lengths of the other two sides of triangle UVW.
Definition:

Similar triangles: Triangles that have corresponding angles equal and corresponding sides proportional. The ratio of corresponding sides is constant.

Original triangle
XYZ: 6, 8, 10 cm
Shortest side ratio
9/6 = 1.5
Other sides
12 cm, 15 cm
Step 1: Identify corresponding sides

Shortest side of XYZ = 6 cm

Shortest side of UVW = 9 cm

Step 2: Find the scale factor

Scale factor = 9 ÷ 6 = 1.5

Step 3: Apply scale factor to other sides

Side corresponding to 8 cm: 8 × 1.5 = 12 cm

Side corresponding to 10 cm: 10 × 1.5 = 15 cm

Step 4: Verify the proportion

6:8:10 = 9:12:15

6/9 = 8/12 = 10/15 = 2/3 ✓

12 cm and 15 cm
Final answer:

The other two sides of triangle UVW are 12 cm and 15 cm.

Applied rules:

• Similarity property: Corresponding sides of similar triangles are proportional

• Scale factor: Ratio of any pair of corresponding sides

• Proportional reasoning: Apply the same scale factor to all corresponding sides

5 Real-World Application
Exercise 5
A rectangular garden measures 12 feet by 8 feet. A scale drawing of the garden has dimensions of 6 inches by 4 inches. What is the scale factor? If a tree is 3 feet from the longer side in the actual garden, how far is it from the longer side in the drawing?
Definition:

Scale drawings: Representations of real objects where all dimensions are reduced by the same scale factor, maintaining proportional relationships.

Actual dimensions
12 ft × 8 ft
Drawing dimensions
6 in × 4 in
Scale factor
1/24
Step 1: Convert units to be consistent

Actual: 12 feet × 8 feet

Drawing: 6 inches × 4 inches

Convert feet to inches: 12 ft = 144 in, 8 ft = 96 in

Step 2: Find the scale factor

Length scale: 6 ÷ 144 = 1/24

Width scale: 4 ÷ 96 = 1/24

Scale factor = 1/24

Step 3: Apply scale factor to tree position

Actual tree distance: 3 feet = 36 inches

Drawing tree distance: 36 × (1/24) = 1.5 inches

Step 4: Verify the calculation

Check: 1.5 inches × 24 = 36 inches = 3 feet ✓

Scale factor: 1/24, Tree position: 1.5 inches
Final answer:

The scale factor is 1/24. The tree is 1.5 inches from the longer side in the drawing.

Applied rules:

• Unit consistency: Convert measurements to the same units before finding scale factor

• Proportional relationships: All dimensions scale by the same factor

• Real-world application: Scale drawings maintain proportional relationships

Comprehensive Summary: Dilations and Similarity
\( \text{Scale factor} = \frac{\text{Image length}}{\text{Pre-image length}} \)
Scale Factor Formula
Core Concepts:

Dilation: A transformation that produces an image that is the same shape as the original but a different size. It stretches or shrinks the original figure.

Similarity: Two figures are similar if they have the same shape but not necessarily the same size. All corresponding angles are equal, and all corresponding sides are proportional.

Scale factor: The ratio of any two corresponding lengths in two similar figures.

Step-by-step solving process:
  1. Identify the transformation: Determine if it's a dilation and identify parameters
  2. Apply the dilation rule: Use the appropriate formula based on center location
  3. Calculate new coordinates: Apply the transformation to all relevant points
  4. Verify similarity: Check that properties are preserved
Tip 1: For dilations centered at the origin, simply multiply each coordinate by the scale factor.
Tip 2: Similar figures have equal angles and proportional sides.
Tip 3: Scale factors greater than 1 produce enlargements, less than 1 produce reductions.
Tip 4: Always check that the scale factor is consistent across all corresponding measurements.
Common mistakes: Confusing scale factor with additive changes, not accounting for center of dilation, forgetting that dilations preserve angle measures but change side lengths proportionally.
Key insights: Dilations create similar figures, scale factors apply to all linear measurements, distances from center of dilation scale by the scale factor.
Essential formulas and principles:

• Dilation at origin: (x,y) → (kx, ky)

• Dilation at (h,k): (x,y) → (k(x-h)+h, k(y-k)+k)

• Scale factor: k = image dimension ÷ original dimension

• Similarity criteria: AA, SAS, SSS for triangles

• Proportional sides: a/b = c/d for corresponding sides

Visualization: Dilation Effects
Exercise 6: Scale Factor Relationships
Showing how different scale factors affect geometric figures

Analysis: The chart demonstrates how scale factors affect figure size while preserving shape.

  • Scale factor > 1: Enlargement
  • Scale factor between 0 and 1: Reduction
  • Scale factor = 1: No change
  • Angle measures remain constant

Questions & Answers

Question: How do I know if two figures are similar? What are the specific criteria?

Answer: Two figures are similar if they meet these criteria:

For triangles specifically, any of these tests prove similarity:

  • AA (Angle-Angle): Two pairs of corresponding angles are equal
  • SAS (Side-Angle-Side): Two pairs of sides are proportional AND the included angles are equal
  • SSS (Side-Side-Side): All three pairs of corresponding sides are proportional

For any polygons:

  • Corresponding angles must be equal
  • Corresponding sides must be proportional

Checking method:

  1. Compare corresponding angles - they must be equal
  2. Calculate ratios of corresponding sides - they must all be equal
  3. Verify that the scale factor is consistent across all sides

Example: If triangle ABC has sides 3, 4, 5 and triangle DEF has sides 6, 8, 10, then 6/3 = 8/4 = 10/5 = 2, so the triangles are similar with scale factor 2.

Question: What happens when the scale factor is negative? I've seen examples with negative scale factors.

Answer: Negative scale factors create a dilation combined with a reflection!

What happens:

  • The figure is dilated by the absolute value of the scale factor
  • The figure is reflected across the center of dilation
  • The figure appears on the opposite side of the center

Examples:

For a point (x,y) with center of dilation at origin:

  • Scale factor of -2: (x,y) → (-2x, -2y)
  • Scale factor of -0.5: (x,y) → (-0.5x, -0.5y)

Effect:

  • Scale factor of -2: Figure is enlarged by factor 2 and reflected
  • Scale factor of -0.5: Figure is reduced by factor 0.5 and reflected

Visual result: The dilated figure is the same size it would be with the positive scale factor, but it's on the opposite side of the center of dilation.

At grade 7 level: You'll most commonly work with positive scale factors, but understanding negative scale factors shows how dilations can create interesting geometric transformations.

Question: How do I find the center of dilation if I'm only given two similar figures?

Answer: To find the center of dilation, follow this method:

Step-by-step process:

  1. Identify corresponding vertices in both figures
  2. Draw lines connecting each pair of corresponding vertices
  3. The center of dilation is where all these lines intersect

Example: If triangle ABC corresponds to triangle A'B'C', draw lines AA', BB', and CC'. The intersection point is the center of dilation.

Special case: If the figures are oriented the same way (no reflection), the center of dilation lies on the same side of both figures.

Verification: Once you find the center, measure the distances from center to corresponding points. The ratio should be constant (the scale factor).

Coordinate method: If you know coordinates of corresponding points, you can solve algebraically using the dilation formula.

Key insight: The center of dilation is equidistant from corresponding points in the ratio of the scale factor. This means if scale factor is k, then distance to image point = k × distance to original point.

Question: Do dilations preserve anything? I know they change size, but what stays the same?

Answer: Yes, dilations preserve several important properties:

What IS preserved:

  • Angle measures: All angles remain the same size
  • Parallelism: Parallel lines remain parallel
  • Collinearity: Points that were on the same line remain on the same line
  • Midpoints: Midpoints of segments remain midpoints
  • Betweenness: If point B was between A and C, it remains between them
  • Shape: The overall shape remains the same (figures are similar)

What is NOT preserved:

  • Lengths: All lengths change by the scale factor
  • Areas: Areas change by the square of the scale factor
  • Perimeters: Perimeters change by the scale factor
  • Position: Location may change depending on center of dilation

Important relationship:

  • If scale factor is k, then linear measurements are multiplied by k
  • Areas are multiplied by k²
  • Volumes (in 3D) are multiplied by k³

Key insight: Dilations preserve the geometric properties that define shape, but change the properties that depend on size.

Question: How are dilations and similarity related to real-world applications? Where would I see this in everyday life?

Answer: Dilations and similarity appear everywhere in real life! Here are practical applications:

Maps and Geography:

  • Map scales are dilations of real locations
  • Distances on maps are proportional to real distances

Architecture and Construction:

  • Blueprints use dilations to represent buildings
  • Models are scaled versions of actual structures

Photography and Art:

  • Zooming in/out changes size but preserves shape
  • Scale models and miniatures

Engineering:

  • Prototype testing (smaller versions of large objects)
  • Parts manufacturing with tolerances

Everyday Examples:

  • Enlarging photos on a screen
  • Reducing recipes for fewer servings
  • Creating logos that look good at any size
  • Reading small text with magnifying glass

Technology:

  • Computer graphics and gaming
  • UI scaling for different screen sizes
  • GPS mapping and navigation

Scientific Applications:

  • Microscopy (magnifying small objects)
  • Telescopes (enlarging distant objects)
  • Scale models in research

Problem-solving skill: Understanding similarity helps with proportional reasoning in many practical situations like construction, design, and scientific measurements.