Solved Exercises on Slope and Intercept in Grade 7

Master slope and intercept: calculating slope, finding intercepts, and interpreting linear relationships through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Calculating Slope from Two Points
Exercise 1
Find the slope of the line passing through points (3, 7) and (8, 17).
Definition:

Slope: The measure of steepness of a line, calculated as the change in y divided by the change in x between any two points on the line. Formula: m = (y₂ - y₁)/(x₂ - x₁).

Slope calculation method:
  1. Identify the coordinates: (x₁, y₁) and (x₂, y₂)
  2. Apply the slope formula: m = (y₂ - y₁)/(x₂ - x₁)
  3. Substitute the coordinates into the formula
  4. Calculate the numerator and denominator separately
  5. Divide to find the slope
Points
(3, 7) and (8, 17)
Slope formula
m = (y₂ - y₁)/(x₂ - x₁)
Result
m = 2
Step 1: Identify the coordinates

(x₁, y₁) = (3, 7) and (x₂, y₂) = (8, 17)

Step 2: Apply the slope formula

m = (y₂ - y₁)/(x₂ - x₁)

Step 3: Substitute the values

m = (17 - 7)/(8 - 3)

Step 4: Calculate numerator and denominator

m = 10/5

Step 5: Simplify the fraction

m = 2

m = 2
Final answer:

The slope of the line is 2.

Applied rules:

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)

• Consistent ordering: Subtract coordinates in the same order for both numerator and denominator

• Positive slope: Line rises from left to right

2 Finding Y-Intercept
Exercise 2
Find the y-intercept of the line with equation y = 4x - 5.
Definition:

Y-intercept: The point where a line crosses the y-axis. At this point, x = 0. In slope-intercept form (y = mx + b), the y-intercept is the constant term b.

Equation
y = 4x - 5
Y-intercept form
y = mx + b
Result
b = -5
Step 1: Identify the equation form

The equation y = 4x - 5 is in slope-intercept form (y = mx + b)

Step 2: Identify the y-intercept

In y = mx + b, the y-intercept is b

Here, b = -5

Step 3: Verify by substitution

Set x = 0: y = 4(0) - 5 = -5

So the y-intercept is (0, -5)

Step 4: State the y-intercept

The y-intercept is -5 (or the point (0, -5))

Y-intercept: -5
Final answer:

The y-intercept is -5.

Applied rules:

• Y-intercept definition: Point where x = 0

• Slope-intercept form: y = mx + b, where b is the y-intercept

• Verification: Substitute x = 0 to find y-value

3 Finding X-Intercept
Exercise 3
Find the x-intercept of the line with equation 2x + 3y = 12.
Definition:

X-intercept: The point where a line crosses the x-axis. At this point, y = 0. To find it, set y = 0 in the equation and solve for x.

Original equation
2x + 3y = 12
Set y = 0
2x + 3(0) = 12
Result
x = 6
Step 1: Understand x-intercept

The x-intercept occurs when y = 0

Step 2: Substitute y = 0

2x + 3(0) = 12

2x + 0 = 12

2x = 12

Step 3: Solve for x

x = 12/2 = 6

Step 4: State the x-intercept

The x-intercept is 6 (or the point (6, 0))

X-intercept: 6
Final answer:

The x-intercept is 6.

Applied rules:

• X-intercept definition: Point where y = 0

• Algebraic method: Set y = 0 and solve for x

• Verification: Substitute result back into original equation

Complete Guide to Slope and Intercept - Laws, Methods, Rules, Definitions
\( m = \frac{y_2 - y_1}{x_2 - x_1} \)
Slope Formula
Formula 1
Slope Formula
m = (y₂ - y₁)/(x₂ - x₁)
Formula 2
Slope-Intercept Form
y = mx + b
Formula 3
Standard Form
ax + by = c
Key definitions:

Slope: The rate of change of y with respect to x, indicating the steepness and direction of a line

Y-intercept: The y-coordinate where the line crosses the y-axis (x = 0)

X-intercept: The x-coordinate where the line crosses the x-axis (y = 0)

Rate of change: How one quantity changes with respect to another, equivalent to slope in linear relationships

Complete methodology:
  1. Identify the problem: Determine if you need to find slope, x-intercept, or y-intercept
  2. Select the appropriate method: Use slope formula, intercept definition, or algebraic manipulation
  3. Apply the method: Execute the calculations systematically
  4. Verify the result: Check your answer by substituting back into the original equation
Tip 1: Positive slope means line rises from left to right, negative slope means it falls.
Tip 2: For y-intercept, always set x = 0; for x-intercept, always set y = 0.
Tip 3: Horizontal lines have slope 0, vertical lines have undefined slope.
Tip 4: Always check your intercepts by substituting back into the original equation.
Common errors: Forgetting to change signs when subtracting, confusing x and y intercepts, misapplying the slope formula.
Key patterns: Linear relationships have constant slope, intercepts are points where the line crosses axes, slope indicates direction and steepness.
Essential formulas and rules:

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)

• Slope-intercept form: y = mx + b

• X-intercept: Set y = 0 and solve for x

• Y-intercept: Set x = 0 and solve for y

• Vertical line: x = a (undefined slope)

• Horizontal line: y = b (slope = 0)

Solution: Exercises 4 to 5
4 Real-World Application
Exercise 4
A plant grows at a constant rate. After 2 weeks it is 8 inches tall, and after 6 weeks it is 20 inches tall. Find the rate of growth (slope) and the initial height (y-intercept).
Definition:

Rate of change: In real-world contexts, slope often represents a rate such as speed, growth rate, or cost per unit. The y-intercept often represents an initial value or fixed cost.

Define variables
x = weeks, y = height
Points
(2, 8) and (6, 20)
Slope
m = 3
Step 1: Define variables

Let x = number of weeks

Let y = height in inches

Step 2: Identify data points

Point 1: (2, 8) - 2 weeks, 8 inches

Point 2: (6, 20) - 6 weeks, 20 inches

Step 3: Calculate the slope (rate of growth)

m = (20 - 8)/(6 - 2) = 12/4 = 3

The plant grows 3 inches per week

Step 4: Find the y-intercept (initial height)

Using point-slope form with point (2, 8):

y - 8 = 3(x - 2)

y - 8 = 3x - 6

y = 3x + 2

The y-intercept is 2 inches

Step 5: Interpret the results

Rate of growth: 3 inches per week

Initial height: 2 inches

Slope = 3 inches/week, Y-intercept = 2 inches
Final answer:

The plant grows at a rate of 3 inches per week and had an initial height of 2 inches.

Applied rules:

• Rate of change: Slope represents the constant rate in linear relationships

• Initial value: Y-intercept often represents the starting value

• Modeling: Real-world situations can be represented by linear equations

5 Slope-Intercept Form
Exercise 5
Write the equation of a line with slope 2/3 that passes through the point (6, 4).
Definition:

Point-slope form: y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is a point on the line. This form is useful when you know the slope and one point.

Given info
m = 2/3, point (6, 4)
Point-slope form
y - 4 = (2/3)(x - 6)
Slope-intercept form
y = (2/3)x
Step 1: Use point-slope form

y - y₁ = m(x - x₁)

y - 4 = (2/3)(x - 6)

Step 2: Distribute the slope

y - 4 = (2/3)x - (2/3)(6)

y - 4 = (2/3)x - 4

Step 3: Solve for y

y = (2/3)x - 4 + 4

y = (2/3)x

Step 4: Identify slope and y-intercept

Slope: m = 2/3

Y-intercept: b = 0

Step 5: Verify the equation

Check with point (6, 4): y = (2/3)(6) = 4 ✓

y = (2/3)x
Final answer:

The equation of the line is y = (2/3)x.

Applied rules:

• Point-slope form: y - y₁ = m(x - x₁) when slope and point are known

• Algebraic manipulation: Distribute and solve for y to get slope-intercept form

• Verification: Substitute the given point to confirm the equation

Comprehensive Summary: Slope and Intercept
\( m = \frac{\text{rise}}{\text{run}} = \frac{\text{change in } y}{\text{change in } x} \)
Slope as Rate of Change
Core Concepts:

Slope: The measure of steepness and direction of a line, calculated as the ratio of vertical change to horizontal change between any two points on the line.

Intercepts: Points where a line crosses the axes; x-intercept occurs when y = 0, y-intercept occurs when x = 0.

Linear relationship: A relationship between variables where the rate of change is constant, represented by a straight line.

Step-by-step process:
  1. Identify what is needed: Determine if you need to find slope, x-intercept, or y-intercept
  2. Select the appropriate formula: Use slope formula, intercept definition, or algebraic method
  3. Apply the formula: Substitute known values and perform calculations
  4. Interpret the result: Understand what the slope or intercept represents
  5. Verify the solution: Check by substituting back into the original equation
Tip 1: Always remember: slope = rise over run = change in y over change in x.
Tip 2: The y-intercept is where the line crosses the y-axis (x = 0).
Tip 3: The x-intercept is where the line crosses the x-axis (y = 0).
Tip 4: Positive slopes rise left to right; negative slopes fall left to right.
Common mistakes: Forgetting to subtract in the correct order for slope, confusing x and y intercepts, not checking the sign of slope, making arithmetic errors.
Key insights: Slope represents the rate of change, intercepts provide initial values or thresholds, linear relationships maintain constant rate of change.
Essential formulas and principles:

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)

• Slope-intercept form: y = mx + b

• Point-slope form: y - y₁ = m(x - x₁)

• Standard form: ax + by = c

• X-intercept: Set y = 0, solve for x

• Y-intercept: Set x = 0, solve for y

Visualization: Slope and Intercept Relationships
Exercise 6: Different Slopes and Intercepts
Showing how different slopes and intercepts affect line characteristics

Analysis: The chart demonstrates how slope and intercept affect the position and steepness of lines.

  • Steeper slopes create more vertical lines
  • Different y-intercepts shift lines up or down
  • Positive slopes rise, negative slopes fall
  • Zero slope creates horizontal lines

Questions & Answers

Question: How do I remember which is the x-intercept and which is the y-intercept? I always get them confused.

Answer: Here are some helpful memory aids:

Memory trick 1 - Alphabetical order: X comes before Y in the alphabet, and X-intercept occurs first when reading from left to right on the x-axis.

Memory trick 2 - Axes association:

  • X-intercept: Line crosses the X-axis (so Y = 0)
  • Y-intercept: Line crosses the Y-axis (so X = 0)

Memory trick 3 - Visual pattern: When you see "x", think "cross x-axis" (y = 0). When you see "y", think "cross y-axis" (x = 0).

Quick check:

  • X-intercept point looks like: (a, 0) - second coordinate is 0
  • Y-intercept point looks like: (0, b) - first coordinate is 0

Practice method: Always say "x-intercept means y = 0" and "y-intercept means x = 0" when solving problems until it becomes automatic.

Example: For the line y = 2x + 6, the y-intercept is 6 (when x = 0), and the x-intercept is -3 (when y = 0).

Question: What happens if the denominator in the slope formula is zero? Like if I have points (3, 5) and (3, 8)?

Answer: When the denominator in the slope formula is zero, the slope is undefined! This happens when the x-coordinates are the same.

Example you gave: Points (3, 5) and (3, 8)

m = (8 - 5)/(3 - 3) = 3/0

Since we can't divide by zero, the slope is undefined.

Geometric meaning: When slope is undefined, you have a vertical line! The line goes straight up and down.

Equation of vertical line: When all points have the same x-coordinate (like x = 3), the equation is x = that constant value.

Special cases:

  • Undefined slope: Vertical line (x = constant)
  • Zero slope: Horizontal line (y = constant)
  • Positive slope: Line rises from left to right
  • Negative slope: Line falls from left to right

Important: Vertical lines are NOT functions because they fail the vertical line test (they hit the line at multiple points).

Real-world example: A vertical line could represent an instant change, like the position of a wall that doesn't move.

Question: How do I know if I calculated the slope correctly? Sometimes I get the right number but the wrong sign.

Answer: Here are verification methods to ensure correct slope calculation:

Sign verification:

  • Positive slope: Line rises from left to right (moving from first point to second, you go up)
  • Negative slope: Line falls from left to right (moving from first point to second, you go down)

Calculation verification:

  1. Be consistent: Always subtract in the same order: (y₂ - y₁)/(x₂ - x₁)
  2. Check with a graph: Plot the points and see if the line's direction matches your slope sign
  3. Verify with a third point: If possible, check if another point on the line satisfies the slope

Example: For points (1, 3) and (4, 7)

Correct: m = (7 - 3)/(4 - 1) = 4/3 (positive, line rises)

Wrong: m = (3 - 7)/(4 - 1) = -4/3 (negative, would mean line falls)

Visual check: From (1, 3) to (4, 7), you move right and up, so slope should be positive.

Double-check method: Calculate using the points in reverse order: (3 - 7)/(1 - 4) = -4/-3 = 4/3 ✓

Common error: Mixing up the order: (y₂ - y₁)/(x₁ - x₂) or (y₁ - y₂)/(x₂ - x₁) - both give wrong signs.

Question: What's the difference between slope and rate of change? Are they the same thing?

Answer: In the context of linear relationships, slope and rate of change are essentially the same concept!

Slope: The mathematical term for the steepness of a line, calculated as rise over run or (change in y)/(change in x).

Rate of change: The real-world interpretation of how one quantity changes with respect to another.

Connection: The slope of a line represents the constant rate of change in a linear relationship.

Examples:

  • Distance vs. time graph: Slope = rate of change of distance = speed
  • Cost vs. quantity graph: Slope = rate of change of cost = unit price
  • Temperature vs. time graph: Slope = rate of change of temperature = heating/cooling rate

Mathematical relationship: Rate of change = Δy/Δx = slope

At grade 7 level: You can use "slope" and "rate of change" interchangeably when discussing linear relationships.

Advanced note: For non-linear relationships, the instantaneous rate of change varies, but the slope concept extends to derivatives in calculus.

Practical significance: Understanding that slope represents rate of change helps connect abstract mathematics to real-world applications.

Question: How do I find the equation of a line if I know the slope and y-intercept? And why is this useful?

Answer: If you know the slope (m) and y-intercept (b), the equation is simply y = mx + b!

Process:

  1. Identify the slope (m) and y-intercept (b)
  2. Substitute these values into y = mx + b
  3. That's your equation!

Example: If slope = 3 and y-intercept = -2, then y = 3x + (-2) = 3x - 2

Why this is useful:

  • Easy graphing: Y-intercept gives you a starting point, slope tells you the direction
  • Prediction: You can find y-values for any x-value
  • Analysis: Slope tells you the rate of change, y-intercept tells you the initial value
  • Comparison: Easy to compare different linear relationships

Real-world applications:

  • Budgeting: y = spending rate × time + initial amount
  • Physics: y = speed × time + starting position
  • Business: y = profit rate × units sold + fixed costs

Verification: Check that the y-intercept (0, b) satisfies the equation: y = m(0) + b = b ✓

Efficiency: Slope-intercept form is the most convenient form for understanding the behavior of a linear relationship.