Composite shape: A figure made up of two or more basic geometric shapes combined together.
Semicircle: Half of a circle, with area equal to half the area of a full circle.
- Identify and separate the individual shapes within the composite figure
- Calculate the area of each individual shape
- Add all individual areas together to get the total area
- Subtract areas if parts are cut out or removed
Area of rectangle = length × width
\(A_{rectangle} = 8 \times 6 = 48 cm²\)
Area of semicircle = ½ × π × r²
\(A_{semicircle} = \frac{1}{2} \times 3.14 \times 4^2 = \frac{1}{2} \times 3.14 \times 16 = 25.12 cm²\)
Total area = rectangle area + semicircle area
\(A_{total} = 48 + 25.12 = 73.12 cm²\)
The area of the composite shape is 73.12 cm²
The area of the composite shape is 73.12 cm²
• Composite area: Sum of individual areas
• Semicircle area: ½ × π × r²
• Rectangle area: length × width
Optimization: Finding the maximum or minimum value of a quantity under given constraints.
Perimeter constraint: Fixed total distance around a shape.
Perimeter = 2(length + width) = 40m
Therefore: length + width = 20m
So: width = 20 - length
Area = length × width
Area = length × (20 - length)
Area = 20l - l²
For a quadratic equation of the form -l² + 20l, the maximum occurs at l = -b/(2a)
Where a = -1 and b = 20
l = -20/(2×(-1)) = 10m
If length = 10m, then width = 20 - 10 = 10m
Maximum area = 10 × 10 = 100m²
Dimensions of 10m × 10m will maximize the area to 100m²
• Perimeter formula: P = 2(l + w)
• Optimization principle: For fixed perimeter, square has maximum area
• Quadratic maximum: Occurs at vertex of parabola
Perimeter: Total distance around the outside of a shape.
Area: Amount of space inside a shape.
Perimeter of rectangle = 2(length + width)
\(P_{rectangle} = 2(12 + 8) = 2(20) = 40 cm\)
Since square has same perimeter: 4 × side = 40 cm
Side length = 40 ÷ 4 = 10 cm
Rectangle area = 12 × 8 = 96 cm²
Square area = 10² = 100 cm²
Square area (100 cm²) > Rectangle area (96 cm²)
The square has a larger area (100 cm²) than the rectangle (96 cm²)
• Rectangle perimeter: P = 2(l + w)
• Square perimeter: P = 4s
• For fixed perimeter, square maximizes area
Composite shape: A figure made up of two or more basic geometric shapes.
Optimization: Finding maximum or minimum values under constraints.
Geometric reasoning: Using properties of shapes to solve problems.
- Understand: Read the problem carefully and identify what is given and what is needed
- Plan: Decide which formulas and strategies to use
- Solve: Carry out the calculations systematically
- Check: Verify the answer makes sense and units are correct
• Composite areas: Add individual areas for combined shapes
• Optimization: Square maximizes area for fixed perimeter
• Relationships: Perimeter and area have inverse optimization properties
• Verification: Always check dimensional consistency
Inscribed circle: A circle drawn inside a polygon that touches all sides of the polygon.
Shaded region: The area between two shapes, calculated by subtracting smaller area from larger area.
When a circle is inscribed in a square, the diameter of the circle equals the side length of the square.
Diameter = 2 × radius = 2 × 6 = 12 cm
So square side = 12 cm
Area of square = side²
\(A_{square} = 12^2 = 144 cm²\)
Area of circle = π × r²
\(A_{circle} = 3.14 × 6^2 = 3.14 × 36 = 113.04 cm²\)
Shaded area = Square area - Circle area
\(A_{shaded} = 144 - 113.04 = 30.96 cm²\)
The area of the shaded region is 30.96 cm²
• Inscribed circle: Diameter = square side length
• Shaded area: Subtract smaller area from larger area
• Circle area: A = πr²
Scale factor: The ratio of corresponding lengths in similar figures.
Area scaling: When dimensions are scaled by factor k, area is scaled by factor k².
Original area = length × width
\(A_{original} = 20 × 15 = 300 m²\)
New length = original length × scale factor
New length = 20 × 1.5 = 30 m
New width = 15 × 1.5 = 22.5 m
New area = new length × new width
\(A_{new} = 30 × 22.5 = 675 m²\)
Ratio = new area / original area
Ratio = 675 / 300 = 2.25
This equals 1.5², confirming the area scaling rule
The ratio of new area to original area is 2.25:1
• Linear scaling: New dimension = original × scale factor
• Area scaling: New area = original area × (scale factor)²
• Scale factor relationship: Area changes by square of linear scale factor
Composite shape: A figure made up of two or more basic geometric shapes combined together.
Optimization: Finding maximum or minimum values of a quantity under given constraints.
Geometric reasoning: Using properties of shapes and spatial relationships to solve problems.
Scale factor: The ratio comparing corresponding lengths in similar figures.
- Problem identification: Carefully read the problem and identify what is being asked
- Information extraction: List all given information and unknowns
- Visualization: Draw diagrams and label all known dimensions
- Strategy planning: Decide which formulas and approaches to use
- Systematic solving: Carry out calculations step by step
- Verification: Check if the answer is reasonable and units are correct
• Draw diagrams: Visual representation helps understand the problem
• Label everything: Mark all known and unknown dimensions
• Break complex shapes: Divide into simpler, familiar shapes
• Use formulas systematically: Apply the correct formula for each part
• Check reasonableness: Verify that the answer makes sense
• Watch for key words: "maximum," "minimum," "ratio," "scale factor"
1×19, 2×18, 3×17, ..., 10×10
Key Insight: As rectangle dimensions approach square (10×10), area increases to maximum.
- Rectangle 1×19: Area = 19 sq units
- Rectangle 5×15: Area = 75 sq units
- Rectangle 10×10: Area = 100 sq units (Maximum)