Solved Exercises on Surface Area of Prisms, Cylinders, Pyramids, Cones in Grade 7

Master surface area calculations for multiple 3D shapes: understanding formulas, step-by-step solutions, and applications through these 5 detailed exercises.

Concepts Summary & Formulas
Surface Area of 3D Shapes: Complete Guide

This section covers the fundamental concepts of calculating surface area for prisms, cylinders, pyramids, and cones. Understanding these calculations is crucial for advanced geometry and real-world applications.

📦
Prism
🥤
Cylinder
🔺
Pyramid
🥢
Cone
📊 Surface Area Formulas
Essential Formulas
📦 Prism: SA = 2B + Ph
Prism Surface Area
🥤 Cylinder: SA = 2πr² + 2πrh
Cylinder Surface Area
🔺 Pyramid: SA = B + (1/2)Pl
Pyramid Surface Area
🥢 Cone: SA = πr² + πrl
Cone Surface Area
Key Definitions:

Surface Area: The total area of all surfaces of a 3D shape, measured in square units

B (Base Area): The area of the base of the shape

P (Perimeter): The perimeter of the base

h (Height): The perpendicular height of the shape

l (Slant Height): The distance along the slanted surface (for pyramids and cones)

r (Radius): The distance from the center to the edge of a circular base

Universal Problem-Solving Method:
  1. Identify the shape (prism, cylinder, pyramid, or cone)
  2. Determine the base type (square, rectangle, circle, triangle, etc.)
  3. Measure or identify dimensions (base area, perimeter, height, radius)
  4. Select the correct formula based on the shape
  5. Calculate individual components (bases, lateral surfaces)
  6. Add all surface areas together
  7. State the final answer with correct square units
Tip 1: Surface area is always in square units (cm², m², etc.).
Tip 2: For pyramids and cones, slant height is different from vertical height.
Tip 3: Remember π ≈ 3.14 for calculations unless specified otherwise.
Tip 4: Break complex shapes into simpler components to calculate.
Prism Properties
Two parallel congruent bases connected by rectangular faces
Cylinder Properties
Two circular bases connected by curved lateral surface
Pyramid Properties
Polygonal base with triangular faces meeting at apex
Cone Properties
Circular base with curved surface meeting at apex
Solution: Exercises 1 to 3
1 Rectangular Prism
Exercise 1
Find the surface area of a rectangular prism with length 6 cm, width 4 cm, and height 3 cm.
📦
Formula:

Rectangular Prism Surface Area: SA = 2(lw + lh + wh)

Step-by-step method:
  1. Identify the shape: Rectangular prism
  2. Identify dimensions: l = 6 cm, w = 4 cm, h = 3 cm
  3. Apply the surface area formula
  4. Calculate each face area
  5. Sum all face areas
Given
l=6, w=4, h=3
Formula
SA = 2(lw+lh+wh)
Result
SA = 108 cm²
Step 1: Calculate Individual Face Areas

lw = 6 × 4 = 24 cm² (front/back faces)

lh = 6 × 3 = 18 cm² (top/bottom faces)

wh = 4 × 3 = 12 cm² (left/right faces)

Step 2: Sum the Areas

lw + lh + wh = 24 + 18 + 12 = 54 cm²

Step 3: Multiply by 2 (Opposite Faces)

SA = 2 × 54 = 108 cm²

Step 4: State Final Answer

Surface Area = 108 cm²

SA = 108 cm²
Final answer:

Surface Area = 108 cm²

Applied rules:

• Prism Surface Area: Sum of all face areas

• Opposite Faces Equal: Front = Back, Top = Bottom, Left = Right

• Square Units: Surface area always in square units

Key Point 1: Rectangular prism has 6 rectangular faces
Key Point 2: Opposite faces have equal areas
Key Point 3: Surface area includes all faces, not just visible ones
2 Cylinder
Exercise 2
Find the surface area of a cylinder with radius 3 cm and height 8 cm. Use π ≈ 3.14.
🥤
Formula:

Cylinder Surface Area: SA = 2πr² + 2πrh

Given
r=3, h=8, π≈3.14
Formula
SA = 2πr² + 2πrh
Result
SA ≈ 207.24 cm²
Step 1: Calculate Circular Base Areas

2πr² = 2 × 3.14 × 3² = 2 × 3.14 × 9 = 56.52 cm²

Step 2: Calculate Lateral Surface Area

2πrh = 2 × 3.14 × 3 × 8 = 150.72 cm²

Step 3: Sum All Surface Areas

SA = 56.52 + 150.72 = 207.24 cm²

Step 4: State Final Answer

Surface Area ≈ 207.24 cm²

SA ≈ 207.24 cm²
Final answer:

Surface Area ≈ 207.24 cm²

Applied rules:

• Cylinder Surface Area: 2 circular bases + 1 curved lateral surface

• Base Area: πr² for each circular base

• Lateral Surface: Circumference × height

Key Point 1: Cylinder has 2 circular bases and 1 curved surface
Key Point 2: Lateral surface area = circumference × height
Key Point 3: Always substitute π value early in calculation
3 Square Pyramid
Exercise 3
Find the surface area of a square pyramid with base edge 6 cm and slant height 5 cm.
🔺
Formula:

Square Pyramid Surface Area: SA = Base Area + 4 × (1/2) × base edge × slant height

SA = s² + 4 × (1/2) × s × l

Given
s=6, l=5
Formula
SA = s² + 4(½sl)
Result
SA = 96 cm²
Step 1: Calculate Base Area

Base Area = s² = 6² = 36 cm²

Step 2: Calculate One Triangular Face Area

Triangular Face = (1/2) × base × slant height = (1/2) × 6 × 5 = 15 cm²

Step 3: Calculate Total Lateral Surface Area

4 triangular faces = 4 × 15 = 60 cm²

Step 4: Calculate Total Surface Area

SA = Base Area + Lateral Surface Area = 36 + 60 = 96 cm²

Step 5: State Final Answer

Surface Area = 96 cm²

SA = 96 cm²
Final answer:

Surface Area = 96 cm²

Applied rules:

• Pyramid Surface Area: Base area + Lateral surface area

• Triangular Face: (1/2) × base × slant height

• Number of Faces: Count all faces including base

Key Point 1: Square pyramid has 1 square base + 4 triangular faces
Key Point 2: Use slant height, not vertical height, for triangular faces
Key Point 3: Surface area includes all 5 faces
Solution: Exercises 4 to 5
4 Cone
Exercise 4
Find the surface area of a cone with radius 4 cm and slant height 7 cm. Use π ≈ 3.14.
🥢
Formula:

Cone Surface Area: SA = πr² + πrl

Given
r=4, l=7, π≈3.14
Formula
SA = πr² + πrl
Result
SA ≈ 138.16 cm²
Step 1: Calculate Circular Base Area

Base Area = πr² = 3.14 × 4² = 3.14 × 16 = 50.24 cm²

Step 2: Calculate Lateral Surface Area

Lateral Surface = πrl = 3.14 × 4 × 7 = 87.92 cm²

Step 3: Calculate Total Surface Area

SA = Base Area + Lateral Surface = 50.24 + 87.92 = 138.16 cm²

Step 4: State Final Answer

Surface Area ≈ 138.16 cm²

SA ≈ 138.16 cm²
Final answer:

Surface Area ≈ 138.16 cm²

Applied rules:

• Cone Surface Area: Circular base + Curved lateral surface

• Base Area: πr²

• Lateral Surface: πrl (using slant height)

Key Point 1: Cone has 1 circular base and 1 curved surface
Key Point 2: Use slant height (l), not vertical height (h), for lateral surface
Key Point 3: Lateral surface area is like a sector of a circle when unfolded
5 Triangular Prism
Exercise 5
Find the surface area of a triangular prism with triangular base having sides 3 cm, 4 cm, 5 cm, and height 10 cm.
🧱
Formula:

Triangular Prism Surface Area: SA = 2 × Base Area + Lateral Surface Area

SA = 2 × Base Area + Perimeter × Height

Given
Triangle sides: 3,4,5; h=10
Formula
SA = 2B + Ph
Result
SA = 132 cm²
Step 1: Identify Triangle Type

This is a right triangle since 3² + 4² = 5² (9 + 16 = 25)

Step 2: Calculate Base Area

Base Area = (1/2) × base × height = (1/2) × 3 × 4 = 6 cm²

Step 3: Calculate Perimeter of Base

Perimeter = 3 + 4 + 5 = 12 cm

Step 4: Calculate Lateral Surface Area

Lateral Surface = Perimeter × Height = 12 × 10 = 120 cm²

Step 5: Calculate Total Surface Area

SA = 2 × Base Area + Lateral Surface = 2 × 6 + 120 = 12 + 120 = 132 cm²

Step 6: State Final Answer

Surface Area = 132 cm²

SA = 132 cm²
Final answer:

Surface Area = 132 cm²

Applied rules:

• Prism Surface Area: 2 × Base Area + Lateral Surface Area

• Lateral Surface: Perimeter of base × height of prism

• Right Triangle: Area = (1/2) × leg₁ × leg₂

Key Point 1: Triangular prism has 2 triangular bases + 3 rectangular faces
Key Point 2: Lateral surface area = perimeter of base × height of prism
Key Point 3: Recognizing right triangles simplifies area calculation
Detailed Course Material: Surface Area of 3D Shapes
📊 Surface Area Formula Summary
All Essential Formulas
Complete Summary: Surface Area of 3D Shapes

Definitions: Surface area is the total area of all surfaces of a 3D shape, measured in square units.

Core Rules: Surface area involves adding up the areas of all faces/surfaces of the 3D shape.

Methods: Identify the shape, calculate individual face areas, then sum all areas together.

Applications: Packaging, construction, manufacturing, and everyday objects requiring coverage or coating.

Comprehensive Definitions:

Surface Area: The total area of all surfaces of a 3D shape, measured in square units

Prism: A 3D shape with two parallel congruent polygonal bases connected by rectangular faces

Cylinder: A 3D shape with two parallel circular bases connected by a curved lateral surface

Pyramid: A 3D shape with a polygonal base and triangular faces meeting at an apex

Cone: A 3D shape with a circular base and a curved surface meeting at an apex

Universal Problem-Solving Strategy:
  1. Shape Recognition: Identify whether it's a prism, cylinder, pyramid, or cone
  2. Base Identification: Determine the shape of the base (square, rectangle, triangle, circle)
  3. Dimension Measurement: Note all given dimensions (sides, radius, height, slant height)
  4. Formula Selection: Choose the appropriate surface area formula
  5. Component Calculation: Calculate areas of individual faces/components
  6. Total Calculation: Add all surface areas together
  7. Unit Verification: Ensure answer has square units
Tip 1: Draw a net (unfolded view) to visualize all faces clearly.
Tip 2: For pyramids and cones, use slant height (l), not vertical height (h) for lateral surfaces.
Tip 3: Surface area is always expressed in square units.
Tip 4: Remember π ≈ 3.14 for calculations unless told otherwise.
Common Errors: Confusing surface area with volume, using wrong height for pyramids/cones, forgetting to include all faces, calculation mistakes with π.
Memorization Tips: Prisms: 2 bases + lateral area, Cylinders: 2 circles + rectangle, Pyramids: base + triangular faces, Cones: circle + curved surface.
Essential Formulas to Memorize:

• Prism Surface Area: SA = 2B + Ph (where B = base area, P = perimeter, h = height)

• Cylinder Surface Area: SA = 2πr² + 2πrh

• Pyramid Surface Area: SA = B + (1/2)Pl (where l = slant height)

• Cone Surface Area: SA = πr² + πrl

Key Point 1: Surface area is always in square units (cm², m², etc.)
Key Point 2: Slant height is different from vertical height for pyramids and cones
Key Point 3: Include all faces in surface area calculation
Key Point 4: Prisms have rectangular lateral faces, cylinders have curved lateral surface
Real-World Examples
Painting containers, wrapping gifts, packaging materials, construction projects
Problem Keywords
"surface area", "cover", "paint", "wrap", "skin", "outside", "square units"
Shape Characteristics
Prisms: parallel bases, Cylinders: circular bases, Pyramids: converging apex, Cones: circular base with apex
Unit Conversion
Always ensure all measurements are in the same unit before calculating

Questions & Answers

Question: How do I know when to use slant height versus vertical height in surface area calculations?

Answer: The choice depends on what part of the surface area you're calculating:

  • Vertical Height (h): Use for calculating the area of the base(s) and for the lateral surface area of prisms and cylinders.
  • Slant Height (l): Use for calculating the lateral surface area of pyramids and cones.

Think of it this way:

  • For pyramids and cones, the lateral (side) surfaces are slanted, so you need the actual distance along the slanted surface (slant height).
  • For prisms and cylinders, the lateral surfaces are straight up and down, so you use the vertical height.

In surface area formulas:

  • Pyramids: SA = Base Area + (1/2) × Perimeter × Slant Height
  • Cones: SA = πr² + πr × Slant Height

Question: How do I find the surface area of a shape if I'm not given the slant height?

Answer: If you're given the vertical height but not the slant height for pyramids or cones, you can calculate the slant height using the Pythagorean theorem:

  • For Cones: If you know the radius (r) and vertical height (h), then: l = √(r² + h²)
  • For Pyramids: If you know the vertical height (h) and the distance from the center of the base to the midpoint of a base edge (let's call it d), then: l = √(h² + d²)

For example, if a cone has radius 3 cm and height 4 cm:

Slant height l = √(3² + 4²) = √(9 + 16) = √25 = 5 cm

Once you have the slant height, you can use it in the surface area formula.

Question: In word problems, how do I identify if I need to find surface area? What keywords should I look for?

Answer: Look for keywords and phrases that indicate you need to find the outside covering of a 3D object:

  • Direct Surface Area Words: "surface area," "cover," "wrap," "paint," "coat," "skin," "outside"
  • Application Contexts: "how much paint is needed," "wrapping paper required," "metal sheeting for can," "plastic needed for cone"
  • Material Indicators: "amount of material," "quantity of," "needed to cover," "required for outside"

Examples:

  • "How much paint is needed to coat the cylindrical tank?" → Surface Area
  • "What is the surface area of the pyramid?" → Surface Area
  • "How much wrapping paper is needed for the conical party hat?" → Surface Area

If the question asks about filling, containing, or internal space, that would be volume instead of surface area.