Writing Equations in Slope-Intercept Form in Grade 8 Mathematics

Master writing equations in slope-intercept form (y = mx + b) through these 3 detailed exercises and comprehensive summary.

Solution: Exercises 1 to 3
1 Given slope = 3, y-intercept = -2
Exercise 1
Write the equation in slope-intercept form given:
slope = 3, y-intercept = -2
Definition:

Slope-intercept form: y = mx + b where m is slope and b is y-intercept

Slope (m): The coefficient of x, representing rate of change

Y-intercept (b): The constant term, representing the value of y when x = 0

Writing method:
  1. Identify the given slope (m) and y-intercept (b)
  2. Substitute these values into the form y = mx + b
  3. Simplify if necessary
  4. Write the final equation
Given
m = 3, b = -2
Formula
y = mx + b
Result
y = 3x - 2
Step 1: Identify given values

Slope (m) = 3

Y-intercept (b) = -2

Step 2: Substitute into slope-intercept form

Start with the general form: y = mx + b

Replace m with 3: y = 3x + b

Replace b with -2: y = 3x + (-2)

Step 3: Simplify the equation

y = 3x + (-2) simplifies to y = 3x - 2

This is the equation in slope-intercept form

Step 4: Verify the equation

Check: When x = 0, y = 3(0) - 2 = -2 ✓

This confirms the y-intercept is -2

Applied rules:

• Slope-intercept form: y = mx + b identifies m and b directly

• Substitution: Replace m and b with given values

• Simplification: Combine like terms if necessary

Tip 1: Pay attention to signs! If y-intercept is negative, write it as subtracting that value
Tip 2: Always verify by checking that the y-intercept is correct when x = 0
2 Given point (2, 5) and slope = -4
Exercise 2
Write the equation in slope-intercept form given:
point (2, 5) and slope = -4
Definition:

Point-slope form: y - y₁ = m(x - x₁) where (x₁, y₁) is a point and m is slope

Conversion: Transform point-slope form to slope-intercept form

Given
(x₁, y₁) = (2, 5), m = -4
Point-slope
y - 5 = -4(x - 2)
Slope-intercept
y = -4x + 13
Step 1: Use point-slope form

Start with: y - y₁ = m(x - x₁)

Substitute: y - 5 = -4(x - 2)

Step 2: Distribute the slope

y - 5 = -4(x - 2)

y - 5 = -4x + 8

Step 3: Solve for y

Add 5 to both sides: y = -4x + 8 + 5

y = -4x + 13

Step 4: Verify the equation

Check with given point (2, 5): y = -4(2) + 13 = -8 + 13 = 5 ✓

This confirms the equation passes through the given point

Applied rules:

• Point-slope form: y - y₁ = m(x - x₁) for a point and slope

• Distributive property: Apply slope to both terms in parentheses

• Algebraic manipulation: Isolate y to convert to slope-intercept form

Tip 1: Always distribute the slope to both terms inside the parentheses
Tip 2: Verify your final equation by substituting the given point
3 Given points (1, 3) and (4, 9)
Exercise 3
Write the equation in slope-intercept form given:
points (1, 3) and (4, 9)
Definition:

Slope formula: m = (y₂ - y₁)/(x₂ - x₁) for two points (x₁, y₁) and (x₂, y₂)

Two-point method: Find slope first, then use point-slope form

Points
(1, 3) and (4, 9)
Slope
m = 2
Equation
y = 2x + 1
Step 1: Calculate the slope

Use slope formula: m = (y₂ - y₁)/(x₂ - x₁)

Let (x₁, y₁) = (1, 3) and (x₂, y₂) = (4, 9)

m = (9 - 3)/(4 - 1) = 6/3 = 2

Step 2: Use point-slope form with calculated slope

Using point (1, 3) and slope m = 2:

y - 3 = 2(x - 1)

Step 3: Convert to slope-intercept form

y - 3 = 2(x - 1)

y - 3 = 2x - 2

y = 2x - 2 + 3

y = 2x + 1

Step 4: Verify with both points

Check with (1, 3): y = 2(1) + 1 = 3 ✓

Check with (4, 9): y = 2(4) + 1 = 9 ✓

Both points satisfy the equation

Applied rules:

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁) for two points

Point-slope conversion: Use either point to convert to slope-intercept form

• Verification: Both original points must satisfy the final equation

Tip 1: You can use either point in point-slope form; you'll get the same final equation
Tip 2: Always verify with both original points to ensure accuracy
Writing Equations: Methods & Techniques
y = mx + b
Slope-Intercept Form
Point-Slope Form
y - y₁ = m(x - x₁)
When you know a point and slope
Slope Formula
m = (y₂ - y₁)/(x₂ - x₁)
When you know two points
Standard Form
Ax + By = C
May need conversion to slope-intercept
Key Definitions:

Slope-intercept form: y = mx + b where m is slope and b is y-intercept

Point-slope form: y - y₁ = m(x - x₁) using one point and slope

Slope: Rate of change, calculated as rise over run

Y-intercept: Point where line crosses y-axis (x = 0)

Direct method: Given m and b → y = mx + b
Point-slope method: Given point and slope → convert to slope-intercept
Two-point method: Given two points → find slope → convert to slope-intercept
Conversion method: Given other form → algebraically convert to y = mx + b
Writing Methods:
  1. Direct substitution: When m and b are given directly
  2. Point-slope conversion: When given a point and slope
  3. Two-point method: When given two points
  4. Form conversion: When given in standard or other form
Comprehensive Summary: Writing Equations in Slope-Intercept Form

Complete Learning Summary

Key Definitions

Slope-intercept form: The equation y = mx + b where m is the slope and b is the y-intercept. This form directly shows both the rate of change and starting point of a linear relationship.

Slope (m): The coefficient of x in y = mx + b, representing the rate of change. Calculated as (change in y)/(change in x) or rise/run.

Y-intercept (b): The constant term in y = mx + b, representing the value of y when x = 0. The point (0, b) where the line crosses the y-axis.

Core Rules & Principles

Rule 1: In y = mx + b, m is always the coefficient of x and b is always the constant term.

Rule 2: Signs matter! If slope is -3, write y = -3x + b. If y-intercept is -5, write y = mx - 5.

Rule 3: The order of operations must be followed when converting from other forms.

Rule 4: Always verify your final equation by substituting known values.

Step-by-Step Methods

Method 1 (Direct): Given m and b, write y = mx + b directly.

Method 2 (Point-Slope): Given point (x₁, y₁) and slope m, use y - y₁ = m(x - x₁), then solve for y.

Method 3 (Two Points): Given (x₁, y₁) and (x₂, y₂), find slope m = (y₂ - y₁)/(x₂ - x₁), then use point-slope method.

Method 4 (Conversion): Given in standard form Ax + By = C, solve for y to get y = mx + b form.

Examples & Applications

Direct example: m = 2, b = -3 → y = 2x - 3

Point-slope example: Point (1, 4), m = 3 → y - 4 = 3(x - 1) → y = 3x + 1

Two-point example: (2, 5) and (4, 9) → m = (9-5)/(4-2) = 2 → y = 2x + 1

Conversion example: 2x + 3y = 6 → y = -2/3x + 2

Tips & Common Mistakes

Tip 1: Always distribute the slope to both terms in the parentheses when using point-slope form.

Tip 2: When converting from standard form, divide EVERY term by the coefficient of y.

Mistake 1: Forgetting to change signs when distributing a negative slope.

Mistake 2: Not properly isolating y when converting from other forms.

Memory Aids

Memory trick: "y equals m-x plus b" helps remember the order of the slope-intercept form.

Visualization: Think of m as "move" (how the line moves) and b as "beginning" (where it starts on y-axis).

Verification: Always substitute known points to check that your equation is correct.

Pattern recognition: Look for the pattern y = (number)x + (number) to confirm you've achieved slope-intercept form.

Questions & Answers

Question: I sometimes get confused about whether to use point-slope form or slope-intercept form directly. How do I know which one to use?

Answer: Great question! The choice depends on what information you're given:

Use direct slope-intercept form (y = mx + b) when:

  • You're given both the slope (m) AND the y-intercept (b) directly
  • Example: slope = 4, y-intercept = -3 → y = 4x - 3

Use point-slope form first when:

  • You're given a point and slope (but not the y-intercept)
  • You're given two points
  • Example: point (2, 5) and slope = 3 → y - 5 = 3(x - 2) → y = 3x - 1

The goal is always to get to y = mx + b form, but the path depends on your starting information.

Question: When I have two points like (3, 7) and (5, 11), does it matter which point I use in the point-slope form?

Answer: No, it doesn't matter which point you use! You'll get the same final equation either way.

Let's try both with points (3, 7) and (5, 11):

First, find slope: m = (11 - 7)/(5 - 3) = 4/2 = 2

Using point (3, 7): y - 7 = 2(x - 3) → y - 7 = 2x - 6 → y = 2x + 1

Using point (5, 11): y - 11 = 2(x - 5) → y - 11 = 2x - 10 → y = 2x + 1

Both approaches give the same result: y = 2x + 1

Choose whichever point seems easier to work with, often the one with smaller numbers.

Question: I have trouble with the distributive property when converting from point-slope to slope-intercept. Any tips?

Answer: The distributive property can be tricky! Here's a systematic approach:

Example: y - 4 = -3(x - 2)

Step 1: Distribute the slope (-3) to BOTH terms inside the parentheses:

y - 4 = -3(x) + (-3)(-2)

y - 4 = -3x + 6

Step 2: Add 4 to both sides to isolate y:

y = -3x + 6 + 4

y = -3x + 10

Key tip: Remember that a negative slope distributed to a negative term creates a positive result (-3 × -2 = +6).