Scale Factor: The ratio that compares the size of the new figure to the original figure in a dilation.
Dilation: A transformation that changes the size of a figure by multiplying coordinates by a scale factor.
Enlargement: A dilation where the scale factor is greater than 1.
Reduction: A dilation where the scale factor is between 0 and 1.
Similar Figures: Figures that have the same shape but different sizes, related by a scale factor.
Proportion: An equation stating that two ratios are equal.
Scale Factor Calculation: Divide any new dimension by its corresponding original dimension: k = (new dimension)/(original dimension).
- Identify corresponding dimensions
- Divide new dimension by original dimension
- Verify with other dimensions
- Classify as enlargement or reduction
Original length = 4 units, New length = 12 units
Original width = 3 units, New width = 9 units
k = New length / Original length = 12/4 = 3
k = New width / Original width = 9/3 = 3
Both ratios equal 3, confirming the scale factor
Since k = 3 > 1, this is an enlargement
The scale factor is 3, representing an enlargement.
• Scale Factor Formula: k = (new dimension)/(original dimension)
• Consistency Check: All ratios must be equal
• Dilation Classification: k > 1 = enlargement, 0 < k < 1 = reduction
Applying Scale Factor: Multiply each dimension by the scale factor to find the new dimensions.
Original sides: 5 cm, 7 cm, 9 cm
New side 1: 5 × 0.6 = 3 cm
New side 2: 7 × 0.6 = 4.2 cm
New side 3: 9 × 0.6 = 5.4 cm
3/5 = 0.6, 4.2/7 = 0.6, 5.4/9 = 0.6 ✓
Since k = 0.6 < 1, this is a reduction
The new triangle has sides of 3 cm, 4.2 cm, and 5.4 cm.
• Dimension Scaling: New dimension = Original dimension × Scale factor
• Proportional Relationships: All sides scale by the same factor
• Reduction: Since k = 0.6 < 1, triangle is reduced in size
Area Scale Factor: When a figure is dilated by scale factor k, the area changes by a factor of k².
Original area = 25 square units
Scale factor k = 3
For area: multiply by k²
Area scale factor = 3² = 9
New area = Original area × Area scale factor
New area = 25 × 9 = 225 square units
The area of the new square is 225 square units.
• Area Scaling: New area = Original area × k²
• Dimension vs Area: Linear dimensions scale by k, areas by k²
• Exponential Scaling: Area changes quadratically with scale factor
Perimeter Scale Factor: Linear measurements (perimeter, side lengths) scale by the same factor k as the dilation.
k = New perimeter / Original perimeter
k = 36 / 24 = 1.5
Area scales by k²
New area = Original area × k²
New area = 32 × (1.5)² = 32 × 2.25 = 72 square units
Perimeter: 24 × 1.5 = 36 ✓
Area: 32 × 2.25 = 72 ✓
The scale factor is 1.5 and the new area is 72 square units.
• Linear Scaling: Perimeter scales by k
• Area Scaling: Area scales by k²
• Consistency: All linear dimensions scale by the same factor
Corresponding Sides: In similar figures, corresponding sides are proportional by the scale factor.
Scale factor k = 2.5
Original side length = 4 units
New side = Original side × Scale factor
New side = 4 × 2.5 = 10 units
New side / Original side = 10 / 4 = 2.5 ✓
The scale factor is indeed 2.5, confirming our calculation
The corresponding side of the second triangle is 10 units.
• Proportional Sides: Corresponding sides of similar figures are proportional
• Scale Factor Application: New dimension = Original dimension × Scale factor
• Similarity Property: All corresponding linear dimensions scale by the same factor
Comprehensive Summary: Scale Factors
Key Definitions
Scale Factor: The ratio that compares the size of the new figure to the original figure in a dilation (k = new/original).
Dilation: A transformation that changes the size of a figure by multiplying coordinates by a scale factor.
Enlargement: A dilation where the scale factor is greater than 1 (k > 1).
Reduction: A dilation where the scale factor is between 0 and 1 (0 < k < 1).
Similar Figures: Figures that have the same shape but different sizes, related by a scale factor.
Proportion: An equation stating that two ratios are equal.
Corresponding Parts: Parts of similar figures that match up when one is transformed onto the other.
Core Rules and Principles
Scale Factor Formula: k = (new dimension)/(original dimension)
Dilation Rule: \((x, y) \rightarrow (kx, ky)\)
Classification:
- k > 1: Enlargement
- 0 < k < 1: Reduction
- k = 1: Identity (no change)
- k < 0: Reflection and dilation
Scaling Effects:
- Linear dimensions (length, width, perimeter): multiply by k
- Area: multiply by k²
- Volume: multiply by k³
Step-by-Step Methods
For Finding Scale Factor:
- Identify corresponding dimensions in both figures
- Divide new dimension by original dimension: k = new/old
- Verify with other corresponding dimensions
- Classify as enlargement (k > 1) or reduction (0 < k < 1)
For Applying Scale Factor:
- Identify the scale factor k
- Multiply each dimension by k
- For area: multiply by k²
- For volume: multiply by k³
For Finding Missing Dimensions:
- Identify the scale factor
- Identify the known dimension
- Multiply or divide by the scale factor as appropriate
- Verify the result makes sense
Examples (Simple → Advanced)
Simple Scale Factor: Original = 2, New = 6 → k = 6/2 = 3
One-Dimensional: Line segment from 3 to 9 units → k = 3
Two-Dimensional: Square with side 4 dilated to side 12 → k = 3, area changes by 9
Three-Dimensional: Cube with edge 2 dilated by k=2 → new edge = 4, volume changes by 8
Complex Shapes: Polygons with multiple sides, all scaling by same factor
Real-World: Maps, blueprints, models with given scale factors
Tips, Tricks, and Common Pitfalls
Tips:
- Always check that all corresponding ratios equal the same scale factor
- Remember: area scales by k², volume by k³
- For reductions, the scale factor is less than 1 but greater than 0
- Scale factor can be expressed as a fraction, decimal, or percentage
- Use cross-multiplication to solve proportion problems
Common Mistakes:
- Confusing area scale factor with linear scale factor
- Applying scale factor to area without squaring it
- Forgetting that all corresponding parts scale by the same factor
- Mixing up original and new dimensions when calculating k
- Not verifying that the scale factor is consistent across all dimensions
Key Notes for Memorization
Memory Aid: "Scale factor is new divided by old, and areas scale by the square of that."
Visual Cue: Think of zooming in (k > 1) or zooming out (0 < k < 1).
Connection: Scale factor is the key to understanding similarity and proportional relationships.
Verification: Always check that corresponding sides are proportional after applying scale factor.
Practice Pattern: Start with simple shapes, then progress to complex figures and real-world applications.
Questions & Answers
Question: What's the difference between scale factor and ratio? Are they the same thing?
Answer: A scale factor is a specific type of ratio:
- Ratio: A comparison of any two quantities (can be anything)
- Scale Factor: A ratio that specifically compares corresponding dimensions of similar figures
So all scale factors are ratios, but not all ratios are scale factors. The scale factor is the constant of proportionality between similar figures.
Question: Why does area scale by k² instead of just k? That seems counterintuitive.
Answer: Area is two-dimensional (length × width), so both dimensions scale by k:
- If original area = l × w, then new area = (kl) × (kw) = k²(l × w)
- Both length and width are multiplied by k, so area is multiplied by k × k = k²
- For volume (3D), it's k³ because length, width, and height all scale by k
This is why a 2x scale factor makes area 4x larger, not 2x larger.
Question: Can scale factors be negative? What happens if they are?
Answer: Yes, scale factors can be negative! When k is negative:
- The figure is dilated by |k| (absolute value of k)
- The figure is also reflected across the center of dilation
- For example, k = -2: figure enlarges by factor of 2 AND flips to opposite side of center
- The size changes according to |k|, but position is inverted
This creates a combination of dilation and reflection, resulting in an inverted, scaled version of the original figure.