Solved Exercises on Slope and Parallel/Perpendicular Lines in Grade 8

Master slope calculation, identify parallel and perpendicular lines, and solve geometric problems through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Calculating slope from two points
Exercise 1
Find the slope of the line passing through points A(2, 3) and B(6, 7).
Then determine if the line rises, falls, is horizontal, or vertical.
Definition:

Slope formula: The slope of a line passing through points \((x_1, y_1)\) and \((x_2, y_2)\) is \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

Slope interpretation: Positive slope = rising line, Negative slope = falling line, Zero slope = horizontal line, Undefined slope = vertical line

Slope calculation method:
  1. Identify the coordinates of the two points
  2. Assign \((x_1, y_1)\) and \((x_2, y_2)\) to the points
  3. Substitute values into the slope formula
  4. Calculate the numerator and denominator separately
  5. Simplify the fraction if possible
  6. Interpret the sign and value of the slope
Points
A(2, 3), B(6, 7)
Formula
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Result
\(m = 1\)
Step 1: Identify the coordinates

Point A: \((x_1, y_1) = (2, 3)\)

Point B: \((x_2, y_2) = (6, 7)\)

Step 2: Apply the slope formula

\(m = \frac{y_2 - y_1}{x_2 - x_1} = \frac{7 - 3}{6 - 2}\)

Step 3: Calculate numerator and denominator

Numerator: \(7 - 3 = 4\)

Denominator: \(6 - 2 = 4\)

Step 4: Compute the slope

\(m = \frac{4}{4} = 1\)

Step 5: Interpret the result

Since \(m = 1 > 0\), the line rises from left to right.

The slope is \(m = 1\), indicating a rising line.
Final answer:

The slope of the line passing through A(2, 3) and B(6, 7) is \(m = 1\). Since the slope is positive, the line rises from left to right.

Applied rules:

• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\) - Order matters in both numerator and denominator

• Sign interpretation: Positive slope = rising, Negative slope = falling

• Special cases: Horizontal line has slope 0, vertical line has undefined slope

Tip 1: Remember "rise over run" - change in y divided by change in x.
Tip 2: Be careful with negative coordinates - subtract carefully.
Tip 3: Always simplify fractions when possible.
2 Identifying parallel lines
Exercise 2
Determine if the lines passing through points A(1, 2) and B(3, 6) are parallel to the line passing through points C(0, -1) and D(2, 3).
Definition:

Parallel lines: Two lines are parallel if and only if they have the same slope and different y-intercepts.

Line 1
m₁ = 2
Line 2
m₂ = 2
Conclusion
Parallel
Step 1: Calculate slope of first line (AB)

Points A(1, 2) and B(3, 6)

\(m_1 = \frac{6 - 2}{3 - 1} = \frac{4}{2} = 2\)

Step 2: Calculate slope of second line (CD)

Points C(0, -1) and D(2, 3)

\(m_2 = \frac{3 - (-1)}{2 - 0} = \frac{4}{2} = 2\)

Step 3: Compare the slopes

Since \(m_1 = m_2 = 2\), the lines have the same slope.

Step 4: Check if they are the same line

Find equations of both lines to ensure they're not identical:

Line AB: Using point A(1, 2), equation: \(y - 2 = 2(x - 1)\) → \(y = 2x\)

Line CD: Using point C(0, -1), equation: \(y - (-1) = 2(x - 0)\) → \(y = 2x - 1\)

Step 5: Conclusion

Same slope (2) but different y-intercepts (0 vs -1), so the lines are parallel.

Both lines have slope m = 2, so they are parallel.
Final answer:

The lines passing through points A(1, 2) and B(3, 6) and through points C(0, -1) and D(2, 3) are parallel because both have the same slope (m = 2).

Applied rules:

• Parallel condition: Two lines are parallel if and only if they have equal slopes

• Equation verification: Check that the lines are not identical by comparing y-intercepts

• Consistency: Calculate slope for both lines using the same formula

Tip 1: Always calculate both slopes before comparing them.
Tip 2: Parallel lines never intersect and maintain constant distance between them.
Tip 3: If slopes are different, lines will intersect at some point.
3 Finding perpendicular lines
Exercise 3
Determine if the line through points P(1, 1) and Q(3, 5) is perpendicular to the line through points R(2, 0) and S(6, -2).
Definition:

Perpendicular lines: Two lines are perpendicular if and only if the product of their slopes equals -1. If one slope is m, the other must be -1/m.

Line 1
m₁ = 2
Line 2
m₂ = -1/2
Product
m₁ × m₂ = -1
Step 1: Calculate slope of first line (PQ)

Points P(1, 1) and Q(3, 5)

\(m_1 = \frac{5 - 1}{3 - 1} = \frac{4}{2} = 2\)

Step 2: Calculate slope of second line (RS)

Points R(2, 0) and S(6, -2)

\(m_2 = \frac{-2 - 0}{6 - 2} = \frac{-2}{4} = -\frac{1}{2}\)

Step 3: Check perpendicularity condition

Calculate the product of the slopes: \(m_1 \times m_2 = 2 \times \left(-\frac{1}{2}\right) = -1\)

Step 4: Verify the perpendicular relationship

Since \(m_1 \times m_2 = -1\), the lines are perpendicular.

This means \(m_2 = -\frac{1}{m_1}\) or \(-\frac{1}{2} = -\frac{1}{2}\) ✓

Step 5: Conclusion

The lines are perpendicular since the product of their slopes equals -1.

The lines are perpendicular because m₁ × m₂ = 2 × (-1/2) = -1
Final answer:

The line through points P(1, 1) and Q(3, 5) is perpendicular to the line through points R(2, 0) and S(6, -2) because the product of their slopes equals -1 (2 × -1/2 = -1).

Applied rules:

• Perpendicular condition: Two lines are perpendicular if and only if \(m_1 \times m_2 = -1\)

• Slope relationship: If one line has slope m, a perpendicular line has slope -1/m

• Special cases: Horizontal lines (slope 0) are perpendicular to vertical lines (undefined slope)

Tip 1: Remember that perpendicular lines form a 90° angle where they meet.
Tip 2: If one line is horizontal (slope 0), any vertical line (undefined slope) is perpendicular to it.
Tip 3: Always multiply the slopes to check perpendicularity, not just compare them.
Rules and methods, laws,...
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope Formula
Parallel Lines
\(m_1 = m_2\)
Equal slopes
Perpendicular Lines
\(m_1 \times m_2 = -1\)
Product = -1
Negative Reciprocal
\(m_{\perp} = -\frac{1}{m}\)
Perpendicular slope
Key definitions:

Slope: Measure of steepness of a line, calculated as rise over run.

Parallel lines: Lines that never intersect and have equal slopes.

Perpendicular lines: Lines that intersect at right angles (90°).

Complete methodology:
  1. For slope calculation: Use the formula \(m = \frac{y_2 - y_1}{x_2 - x_1}\) with two points on the line
  2. For parallel lines: Compare slopes - if equal, lines are parallel
  3. For perpendicular lines: Multiply slopes - if product is -1, lines are perpendicular
  4. For verification: Always check calculations and interpret results
Tip 1: The slope of a horizontal line is 0 (no rise).
Tip 2: The slope of a vertical line is undefined (zero run in denominator).
Tip 3: Perpendicular lines form a cross (+) shape when drawn.
Tip 4: Always double-check your arithmetic when calculating slopes.
Common errors: Mixing up coordinates, forgetting order in subtraction, miscalculating fractions.
Exam preparation: Practice identifying slopes from graphs, memorize parallel and perpendicular conditions.
Formulas to know by heart:

• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

• Parallel lines: \(m_1 = m_2\)

• Perpendicular lines: \(m_1 \times m_2 = -1\)

• Perpendicular slope: \(m_{\perp} = -\frac{1}{m}\)

Solution: Exercises 4 to 5
4 Finding perpendicular slope
Exercise 4
Given a line with slope m = 3/4, find the slope of a line perpendicular to it. Then find the equation of the perpendicular line passing through point (2, 5).
Definition:

Perpendicular slope: If a line has slope m, then any line perpendicular to it has slope -1/m (negative reciprocal).

Point-slope form: The equation of a line with slope m passing through point \((x_1, y_1)\) is \(y - y_1 = m(x - x_1)\).

Given slope
m = 3/4
Perp. slope
mₚ = -4/3
Equation
y = -4x/3 + 23/3
Step 1: Find the perpendicular slope

If the original slope is \(m = \frac{3}{4}\), then the perpendicular slope is:

\(m_{\perp} = -\frac{1}{m} = -\frac{1}{\frac{3}{4}} = -\frac{4}{3}\)

Step 2: Use point-slope form

The point-slope form is \(y - y_1 = m(x - x_1)\)

Using point (2, 5) and slope \(m_{\perp} = -\frac{4}{3}\):

\(y - 5 = -\frac{4}{3}(x - 2)\)

Step 3: Simplify the equation

\(y - 5 = -\frac{4}{3}x + \frac{8}{3}\)

\(y = -\frac{4}{3}x + \frac{8}{3} + 5\)

\(y = -\frac{4}{3}x + \frac{8}{3} + \frac{15}{3}\)

\(y = -\frac{4}{3}x + \frac{23}{3}\)

Step 4: Verify perpendicularity

Check: Original slope × Perpendicular slope = \(\frac{3}{4} \times \left(-\frac{4}{3}\right) = -1\) ✓

Step 5: Verify the point lies on the line

Substitute (2, 5): \(5 = -\frac{4}{3}(2) + \frac{23}{3} = -\frac{8}{3} + \frac{23}{3} = \frac{15}{3} = 5\) ✓

Perpendicular slope: mₚ = -4/3, Equation: y = -4x/3 + 23/3
Final answer:

The slope of a line perpendicular to the given line is \(m_{\perp} = -\frac{4}{3}\). The equation of the perpendicular line passing through (2, 5) is \(y = -\frac{4}{3}x + \frac{23}{3}\).

Applied rules:

• Negative reciprocal: Perpendicular slope is \(-\frac{1}{m}\) of the original slope

• Point-slope form: Use when you know a point and slope of a line

• Verification: Always check that slopes multiply to -1 for perpendicularity

Tip 1: To find the negative reciprocal of a fraction, flip it and change the sign.
Tip 2: If original slope is a whole number n, perpendicular slope is -1/n.
Tip 3: Perpendicular lines have slopes that are opposite reciprocals.
5 Real-world application
Exercise 5
A wheelchair ramp must have a maximum slope of 1/12 for safety. If a ramp rises 2 feet vertically, what is the minimum horizontal distance needed? Also, determine if a proposed ramp with a 15-foot horizontal run and 1-foot rise meets safety requirements.
Definition:

Slope in real-world contexts: Rise over run, representing steepness. In accessibility, maximum slope limits ensure safety.

Required slope
≤ 1/12
Part 1
Run ≥ 24 ft
Part 2
Safe ✓
Step 1: Part 1 - Find minimum horizontal distance

Given: Maximum slope = 1/12, Vertical rise = 2 feet

Using slope formula: \(m = \frac{\text{rise}}{\text{run}}\)

For maximum safe slope: \(\frac{1}{12} = \frac{2}{\text{run}}\)

Cross multiply: \(1 \times \text{run} = 12 \times 2\)

So: \(\text{run} = 24\) feet

Step 2: Part 1 conclusion

The minimum horizontal distance needed is 24 feet to maintain a safe slope of 1/12 or less.

Step 3: Part 2 - Check proposed ramp safety

Given: Horizontal run = 15 feet, Vertical rise = 1 foot

Actual slope = \(\frac{\text{rise}}{\text{run}} = \frac{1}{15}\)

Step 4: Compare slopes

Maximum allowed slope: 1/12 ≈ 0.083

Proposed ramp slope: 1/15 ≈ 0.067

Since 1/15 < 1/12, the proposed ramp is safer than the maximum requirement.

Step 5: Verification

We can also compare directly: \(\frac{1}{15} < \frac{1}{12}\) because 15 > 12 (when numerators are equal, larger denominator means smaller fraction)

Part 1: Minimum run = 24 ft; Part 2: Proposed ramp is safe (slope = 1/15 < 1/12)
Final answer:

Part 1: For a 2-foot rise, the minimum horizontal distance needed is 24 feet to maintain a safe slope of 1/12. Part 2: The proposed ramp with 15-foot run and 1-foot rise has a slope of 1/15, which is less than the maximum allowed slope of 1/12, so it meets safety requirements.

Applied rules:

• Real-world slope: Still calculated as rise over run in practical applications

• Inequality comparison: When checking maximum limits, compare actual value to allowed maximum

• Fraction comparison: To compare fractions with same numerator, larger denominator means smaller value

Tip 1: In real-world applications, slope often represents rate of change or steepness.
Tip 2: When solving for unknowns in slope problems, use cross multiplication.
Tip 3: Safety requirements often set maximum slope values for accessibility.
Comprehensive Rules, Methods, and Properties for Slope and Parallel/Perpendicular Lines
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope Formula
Key definitions:

Slope: The measure of steepness of a line, calculated as the ratio of vertical change (rise) to horizontal change (run).

Parallel lines: Lines in the same plane that never intersect and have identical slopes.

Perpendicular lines: Lines that intersect at a right angle (90°), with slopes that are negative reciprocals of each other.

Rate of change: In real-world applications, slope represents how one quantity changes relative to another.

Complete methodology:
  1. Calculate slope: Use the formula \(m = \frac{y_2 - y_1}{x_2 - x_1}\) with any two points on the line
  2. Identify parallel lines: Compare slopes - if \(m_1 = m_2\), lines are parallel
  3. Identify perpendicular lines: Check if \(m_1 \times m_2 = -1\) or if \(m_2 = -\frac{1}{m_1}\)
  4. Find perpendicular slope: Take the negative reciprocal of the original slope
  5. Verify results: Check calculations and ensure mathematical relationships hold
Tip 1: Always pay attention to the order of subtraction in the slope formula to avoid sign errors.
Tip 2: The slope of a horizontal line is 0, and the slope of a vertical line is undefined.
Tip 3: For perpendicular lines, multiply the slopes to check if the product is -1.
Tip 4: When finding the negative reciprocal, flip the fraction and change the sign.
Common errors: Mixing up x and y coordinates, incorrect order of subtraction, miscalculating fractions, forgetting sign changes when finding negative reciprocals.
Exam preparation: Memorize slope formulas, practice identifying parallel and perpendicular lines from equations, work on word problems involving rates of change.
Formulas to know by heart:

• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

• Parallel lines: \(m_1 = m_2\)

• Perpendicular lines: \(m_1 \times m_2 = -1\)

• Perpendicular slope: \(m_{\perp} = -\frac{1}{m}\)

• Point-slope form: \(y - y_1 = m(x - x_1)\)

• Slope-intercept form: \(y = mx + b\)

Questions & Answers

Question: I don't understand why the product of slopes of perpendicular lines equals -1. Can you explain the reasoning behind this rule?

Answer: Great question! The reason comes from the geometric relationship between perpendicular lines:

  • When two lines are perpendicular, one line is rotated 90° from the other.
  • If a line has slope m, rotating it 90° creates a new line whose slope is the negative reciprocal: -1/m.
  • When we multiply the original slope by the new slope: m × (-1/m) = -1.

Think of it this way: if one line rises steeply (large positive slope), a perpendicular line must fall steeply in the opposite direction (large negative slope with reciprocal magnitude). For example, if one line has slope 2, a perpendicular line has slope -1/2. Their product: 2 × (-1/2) = -1.

This relationship holds for all perpendicular lines except when one is horizontal (slope 0) and the other is vertical (undefined slope), which are still perpendicular by definition.

Question: How do I quickly find the negative reciprocal of a fraction? For example, what is the negative reciprocal of 3/5?

Answer: Finding the negative reciprocal of a fraction is straightforward:

  1. Flip the fraction (find its reciprocal): 3/5 becomes 5/3
  2. Change the sign (make it negative): 5/3 becomes -5/3

So the negative reciprocal of 3/5 is -5/3.

Quick verification: (3/5) × (-5/3) = -15/15 = -1 ✓

Additional examples:

  • Negative reciprocal of 2/7 is -7/2
  • Negative reciprocal of -4/3 is 3/4 (sign changes from negative to positive)
  • Negative reciprocal of 5 (or 5/1) is -1/5

Remember: flip then negate!

Question: I sometimes get confused about whether to use (y₂-y₁)/(x₂-x₁) or (x₂-x₁)/(y₂-y₁) for slope. How can I remember which is correct?

Answer: The correct formula is always slope = rise/run = (y₂-y₁)/(x₂-x₁). Here are memory aids to remember this:

  • "Rise over Run": Rise is the vertical change (Δy), run is the horizontal change (Δx)
  • Y comes before X alphabetically: Think "Y over X" - (y₂-y₁)/(x₂-x₁)
  • Vertical over Horizontal: Y-axis is vertical, X-axis is horizontal
  • Dependent over Independent: Y is dependent variable, X is independent variable

Think of slope as "how much y changes per unit change in x." So we put the change in y (rise) over the change in x (run).

Example: Points (1, 2) and (3, 6) - slope = (6-2)/(3-1) = 4/2 = 2. This means for every 1 unit increase in x, y increases by 2 units.

If you accidentally switch the order, you'll get the reciprocal of the correct slope, which will lead to wrong conclusions about parallel and perpendicular relationships.