Dilation: A transformation that changes the size of a figure by a scale factor k from a center point.
Scale Factor: The ratio of the lengths of corresponding sides of the image and pre-image (k).
Center of Dilation: The fixed point from which the dilation occurs.
Enlargement: A dilation with scale factor k > 1.
Reduction: A dilation with scale factor 0 < k < 1.
Pre-image: The original figure before dilation.
Image: The resulting figure after dilation.
Point Dilation: Apply the dilation rule \((x, y) \rightarrow (kx, ky)\) where k is the scale factor.
- Identify the original coordinates: (2, 3)
- Identify the scale factor: k = 3
- Apply the dilation rule: \((x, y) \rightarrow (kx, ky)\)
- Calculate the new coordinates
Point A has coordinates (2, 3)
Scale factor k = 3 (enlargement since k > 1)
\((x, y) \rightarrow (kx, ky)\)
\((2, 3) \rightarrow (3 \times 2, 3 \times 3)\)
\((3 \times 2, 3 \times 3) = (6, 9)\)
The image of point A is A'(6, 9).
• Dilation Rule: \((x, y) \rightarrow (kx, ky)\)
• Scale Factor: Multiplier for both coordinates
• Enlargement: Since k = 3 > 1, the point moves farther from origin
Shape Dilation: Apply the same dilation rule to each vertex of the shape.
k = 1/2 (reduction since 0 < k < 1)
A(4, 6) → A'(4×1/2, 6×1/2) = A'(2, 3)
B(8, 2) → B'(8×1/2, 2×1/2) = B'(4, 1)
C(2, 8) → C'(2×1/2, 8×1/2) = C'(1, 4)
Triangle A'B'C' has vertices A'(2, 3), B'(4, 1), C'(1, 4).
• Dilation Rule: Apply same rule to all vertices
• Reduction: Since k = 1/2, triangle becomes smaller
• Shape Preservation: Triangle maintains its shape, only size changes
Scale Factor Determination: The scale factor k equals the ratio of corresponding coordinates: k = (image coordinate)/(original coordinate).
Original x: 3, Image x: 9
Scale factor: k = 9/3 = 3
Original y: 4, Image y: 12
Scale factor: k = 12/4 = 3
Both x and y scale factors equal 3, confirming our result
Since k = 3 > 1, this is an enlargement
The scale factor is 3, representing an enlargement.
• Scale Factor Calculation: k = (image coordinate)/(original coordinate)
• Consistency Check: Both x and y ratios must be equal
• Dilation Classification: k > 1 = enlargement, 0 < k < 1 = reduction
Rectangle Dilation: Apply the dilation rule to all four vertices of the rectangle.
k = 2.5 (enlargement since k > 1)
P(1, 2) → P'(2.5, 5)
Q(4, 2) → Q'(10, 5)
R(4, 5) → R'(10, 12.5)
S(1, 5) → S'(2.5, 12.5)
The rectangle is enlarged by a factor of 2.5 from the origin, maintaining its shape but increasing its size.
The rectangle is enlarged by a factor of 2.5 from the origin, maintaining its shape but increasing its size.
• Uniform Scaling: All vertices multiplied by same scale factor
• Shape Preservation: Rectangle maintains rectangular shape
• Proportional Change: All dimensions increase by same factor
Length Change Under Dilation: The length of a dilated segment equals the original length multiplied by the scale factor.
Using distance formula: √[(6-2)² + (4-1)²] = √[16 + 9] = √25 = 5
(2, 1) → (2/3, 1/3)
(6, 4) → (2, 4/3)
New length = Original length × Scale factor
New length = 5 × (1/3) = 5/3
√[(2 - 2/3)² + (4/3 - 1/3)²] = √[(4/3)² + (1)²] = √[16/9 + 9/9] = √(25/9) = 5/3 ✓
The length of the new segment is 5/3 units.
• Length Scaling: New length = Original length × Scale factor
• Distance Preservation: Proportional relationship maintained
• Reduction: Since k = 1/3 < 1, segment becomes shorter
Comprehensive Summary: Understanding Dilations
Key Definitions
Dilation: A transformation that changes the size of a figure by a scale factor k from a center point, preserving shape but changing size.
Scale Factor: The ratio of the lengths of corresponding sides of the image and pre-image, represented by k.
Center of Dilation: The fixed point from which the dilation occurs; this point remains unchanged.
Enlargement: A dilation with scale factor k > 1, resulting in a larger image.
Reduction: A dilation with scale factor 0 < k < 1, resulting in a smaller image.
Pre-image: The original figure before dilation is applied.
Image: The resulting figure after dilation is applied.
Similar Figures: Figures that have the same shape but different sizes, related by dilation.
Core Rules and Principles
Dilation Rule: \((x, y) \rightarrow (kx, ky)\) where k is the scale factor.
Scale Factor Classification:
- k > 1: Enlargement (figure gets larger)
- 0 < k < 1: Reduction (figure gets smaller)
- k = 1: Identity (figure remains unchanged)
- k < 0: Reflection and dilation (figure flips and changes size)
Properties Preserved:
- Shape (figures remain similar)
- Angle measures
- Parallelism
- Perpendicularity
Properties Changed:
- Size (lengths of sides)
- Area (multiplied by k²)
- Perimeter (multiplied by k)
Step-by-Step Methods
For Point Dilation:
- Identify the original coordinates (x, y)
- Determine the scale factor k
- Apply the rule: \((x, y) \rightarrow (kx, ky)\)
- Calculate the new coordinates
For Shape Dilation:
- Identify all vertices of the shape
- Determine the scale factor k
- Apply the dilation rule to each vertex
- Connect the dilated vertices to form the image
For Finding Scale Factor:
- Identify corresponding coordinates of pre-image and image
- Calculate k = (image coordinate)/(original coordinate)
- Verify that the ratio is consistent for all coordinates
- Classify as enlargement (k > 1) or reduction (0 < k < 1)
Examples (Simple → Advanced)
Simple Point Dilation: A(1, 1) dilated by k=2 → A'(2, 2)
Segment Dilation: Line segment from (0, 0) to (3, 4) dilated by k=1/2
Triangle Dilation: Triangle with vertices (0, 0), (2, 0), (1, 2) dilated by k=3
Complex Shape: Polygon with multiple vertices, each dilated by same scale factor
Area Change: Square with side 2 (area 4) dilated by k=2 → area = 4×2² = 16
Coordinate System: Dilation with center not at origin using translation
Tips, Tricks, and Common Pitfalls
Tips:
- Always multiply both coordinates by the scale factor k
- Remember: k > 1 means enlargement, 0 < k < 1 means reduction
- Shapes remain similar after dilation
- Check that corresponding angles remain equal
- Verify that ratios of corresponding sides equal the scale factor
Common Mistakes:
- Only multiplying one coordinate by the scale factor
- Confusing enlargement with reduction
- Forgetting that area changes by k² and perimeter by k
- Mixing up pre-image and image coordinates
- Not verifying that the center of dilation remains fixed
Key Notes for Memorization
Memory Aid: "Dilate means multiply" - multiply both coordinates by the scale factor.
Visual Cue: Think of dilation as zooming in (k > 1) or zooming out (0 < k < 1).
Connection: Dilation is like resizing an image while keeping proportions.
Verification: Check that corresponding sides are proportional and angles are preserved.
Practice Pattern: Start with single points, then progress to segments, triangles, and complex shapes.
Questions & Answers
Question: How is dilation different from other transformations like translation, rotation, or reflection?
Answer: The key difference is:
- Dilation: Changes the size of the figure (non-rigid transformation)
- Translation: Slides the figure without changing size or shape
- Rotation: Turns the figure without changing size or shape
- Reflection: Flips the figure without changing size or shape
Dilation is the only transformation that changes the size of the figure, making it a non-rigid transformation. The others are rigid transformations that preserve size and shape.
Question: What happens to the area and perimeter of a shape after dilation? Do they change proportionally?
Answer: Yes, they change proportionally but differently:
- Linear measurements (sides, perimeter): Multiply by scale factor k
- Area: Multiply by k² (scale factor squared)
- Volume (3D): Multiply by k³ (scale factor cubed)
For example, if you dilate a square with side length 2 by scale factor 3: the new side length is 6 (multiplied by 3), the new area is 36 (2² × 3² = 4 × 9 = 36).
Question: Can the scale factor be negative? What happens if it is?
Answer: Yes, the scale factor can be negative! When k is negative:
- The figure is dilated by |k| (absolute value of k)
- The figure is also reflected across the center of dilation
- For example, k = -2: figure enlarges by factor of 2 AND flips to opposite side of center
- The figure maintains its size change properties (enlargement/reduction) but is inverted
This creates a combination of dilation and reflection, resulting in an inverted, scaled version of the original figure.