Problem-Solving with Linear Functions in Grade 8 Mathematics

Master problem-solving with linear functions through these 3 detailed exercises and comprehensive summary.

Solution: Exercises 1 to 3
1 Car Rental Problem
Exercise 1
A car rental company charges $25 per day plus a $50 insurance fee. Write a linear function to represent the total cost and find the cost for renting for 7 days.
Definition:

Linear function: A function that can be written in the form f(x) = mx + b where m and b are constants

Rate of change: The coefficient m, representing how much y changes per unit change in x

Initial value: The constant b, representing the value of y when x = 0

Problem-solving method:
  1. Identify the variables and what they represent
  2. Determine the rate of change (slope)
  3. Identify the initial value (y-intercept)
  4. Write the linear function in the form f(x) = mx + b
  5. Use the function to solve for specific values
Variables
x = days, f(x) = cost
Rate
m = $25/day
Initial
b = $50
Step 1: Define the variables

Let x = number of days the car is rented

Let f(x) = total cost in dollars

Step 2: Identify the rate of change

The cost increases by $25 for each additional day

Rate of change (slope) m = 25 dollars per day

Step 3: Identify the initial value

Even if the car is rented for 0 days, there's still a $50 insurance fee

Initial value (y-intercept) b = 50 dollars

Step 4: Write the linear function

f(x) = mx + b

f(x) = 25x + 50

Step 5: Solve for 7 days

f(7) = 25(7) + 50

f(7) = 175 + 50 = 225

The cost for renting for 7 days is $225

Applied rules:

• Linear function form: f(x) = mx + b identifies rate and initial value

• Rate identification: Look for "per" or "for each" to find the slope

• Initial value: The value when the independent variable is zero

Tip 1: The slope usually represents a rate (cost per day, speed, etc.)
Tip 2: The y-intercept often represents a starting amount or fixed cost
2 Water Tank Problem
Exercise 2
A water tank initially contains 200 gallons of water. Water drains from the tank at a rate of 5 gallons per minute. Write a linear function to represent the remaining water and find how long it takes to empty the tank.
Definition:

Decreasing linear function: When slope is negative, representing decrease over time

Initial condition: Starting value before any change occurs

Variables
x = minutes, f(x) = gallons
Rate
m = -5 gal/min
Initial
b = 200 gal
Step 1: Define the variables

Let x = number of minutes that have passed

Let f(x) = amount of water remaining in gallons

Step 2: Identify the rate of change

The water level decreases by 5 gallons each minute

Rate of change (slope) m = -5 gallons per minute (negative because it's decreasing)

Step 3: Identify the initial value

Initially, the tank contains 200 gallons

Initial value (y-intercept) b = 200 gallons

Step 4: Write the linear function

f(x) = mx + b

f(x) = -5x + 200

Step 5: Find when tank is empty

When the tank is empty, f(x) = 0

0 = -5x + 200

5x = 200

x = 40 minutes

The tank will be empty after 40 minutes

Applied rules:

• Negative slope: Represents decrease or decline over time

• Initial condition: Value at the start (time = 0)

• Solving for zeros: Set f(x) = 0 to find when the function reaches zero

Tip 1: Decreasing quantities have negative slopes
Tip 2: To find when something reaches zero, set the function equal to zero and solve
3 Savings Account Problem
Exercise 3
Sarah starts a savings account with $100. She deposits $20 each week. Write a linear function to represent her savings and determine how many weeks it will take to save $300.
Definition:

Accumulation model: Linear function representing growth over time

Proportional increase: Constant rate of addition to initial amount

Variables
x = weeks, f(x) = savings
Rate
m = $20/week
Initial
b = $100
Step 1: Define the variables

Let x = number of weeks since opening the account

Let f(x) = total savings in dollars

Step 2: Identify the rate of change

Sarah adds $20 each week to her savings

Rate of change (slope) m = 20 dollars per week

Step 3: Identify the initial value

She started with $100 in the account

Initial value (y-intercept) b = 100 dollars

Step 4: Write the linear function

f(x) = mx + b

f(x) = 20x + 100

Step 5: Find when savings reach $300

When f(x) = 300:

300 = 20x + 100

200 = 20x

x = 10 weeks

It will take 10 weeks to save $300

Applied rules:

• Positive slope: Represents accumulation or increase over time

• Initial deposit: The y-intercept represents the starting amount

• Regular additions: The slope represents the consistent rate of addition

Tip 1: Increasing quantities have positive slopes
Tip 2: To find when the function reaches a certain value, set f(x) equal to that value and solve
Linear Functions: Models & Applications
f(x) = mx + b
Linear Function Form
Rate Problems
distance = rate × time
Speed, flow, growth rates
Cost Functions
total = rate × quantity + fixed
Rental, subscription, pricing
Accumulation
amount = rate × time + initial
Savings, inventory, population
Key Definitions:

Independent variable (x): The variable that is controlled or manipulated

Dependent variable (f(x)): The variable that changes in response to x

Rate of change (slope m): How much f(x) changes for each unit change in x

Initial value (y-intercept b): The value of f(x) when x = 0

Linear function: A function whose graph is a straight line

Positive slope: Increasing trend (growth, accumulation)
Negative slope: Decreasing trend (decay, consumption)
Zero slope: Constant value (no change)
Y-intercept: Starting value, fixed cost, initial condition
Problem-Solving Methods:
  1. Variable identification: Determine which quantity depends on which
  2. Rate determination: Find the constant rate of change
  3. Initial value: Identify the starting condition
  4. Function formation: Write f(x) = mx + b with appropriate values
  5. Application: Use the function to solve specific problems
Comprehensive Summary: Problem-Solving with Linear Functions

Complete Learning Summary

Key Definitions

Linear function: A function that can be written in the form f(x) = mx + b where m and b are constants. Its graph is a straight line.

Rate of change (slope m): The coefficient of x in f(x) = mx + b, representing how much the output changes for each unit change in the input.

Initial value (y-intercept b): The constant term in f(x) = mx + b, representing the value of the function when x = 0.

Independent variable: The input variable (usually x) that can be controlled or manipulated.

Dependent variable: The output variable (usually f(x)) that responds to changes in the independent variable.

Core Rules & Principles

Rule 1: In f(x) = mx + b, m represents the rate of change and b represents the initial value.

Rule 2: Positive slopes indicate increasing relationships, negative slopes indicate decreasing relationships.

Rule 3: The units of the slope are the units of output divided by the units of input.

Rule 4: To find when a function reaches a specific value, set f(x) equal to that value and solve for x.

Step-by-Step Methods

Method 1 (Function creation): Identify the rate of change (m) and initial value (b), then write f(x) = mx + b.

Method 2 (Value prediction): Substitute a known input value into the function to find the output.

Method 3 (Input determination): Set the function equal to a desired output and solve for the input.

Method 4 (Comparison): Use the function to compare different scenarios or time periods.

Examples & Applications

Cost problems: f(x) = rate × x + fixed cost (rental fees, cell phone plans)

Distance-speed-time: distance = speed × time + initial distance

Financial growth: savings = weekly deposit × weeks + initial amount

Consumption/depletion: remaining = initial - rate × time (water draining, fuel consumption)

Tips & Common Mistakes

Tip 1: Always include units when interpreting slope and y-intercept.

Tip 2: Make sure the slope has the correct sign (positive for increase, negative for decrease).

Mistake 1: Mixing up which variable is dependent and which is independent.

Mistake 2: Forgetting to consider the sign of the slope in real-world contexts.

Memory Aids

Memory trick: "f of x equals m-x plus b" - m is the rate, b is the beginning amount.

Visualization: Think of m as "how fast it changes" and b as "where it starts."

Verification: Always check that your function makes sense in the real-world context.

Pattern recognition: Look for "per," "each," or "for every" to identify rates.

Questions & Answers

Question: How do I know which variable should be x and which should be f(x) in a word problem?

Answer: The independent variable (x) is what you control or what changes on its own. The dependent variable (f(x)) is what changes as a result of the independent variable.

Ask yourself: "What depends on what?"

Examples:

  • Time and cost: Cost depends on time → x = time, f(x) = cost
  • Distance and fuel: Fuel consumed depends on distance → x = distance, f(x) = fuel
  • Items purchased and total: Total depends on items → x = items, f(x) = total

The independent variable is usually time, quantity, or some input; the dependent variable is the result or outcome.

Question: I can write the linear function, but I struggle with explaining what the slope and y-intercept mean in the context of the problem. Any tips?

Answer: Here's a systematic approach to interpreting slope and y-intercept in context:

For the slope: Use the phrase "For each unit increase in [x-variable], [f(x)-variable] changes by [slope value] [units]."

For the y-intercept: Use the phrase "When [x-variable] is 0, [f(x)-variable] is [y-intercept value] [units]."

Example: If f(x) = 25x + 50 represents car rental cost:

  • Slope: "For each additional day, the cost increases by $25"
  • Y-intercept: "When the rental period is 0 days, the cost is $50" (the insurance fee)

Always include units and make sure your interpretation makes sense in the real-world context.

Question: When I have a problem about something decreasing, like water draining, why is the slope negative?

Answer: The slope represents the rate of change. When something is decreasing, the rate of change is negative.

Think of it this way:

  • If water is draining at 5 gallons per minute, the amount of water is decreasing by 5 gallons each minute
  • Decrease means negative change, so slope = -5
  • The equation f(x) = -5x + 200 shows that after x minutes, y gallons remain

Positive slope = increasing quantity

Negative slope = decreasing quantity

The sign of the slope tells you the direction of change in the real-world situation.