Writing Linear Equations from Data in Grade 8 Mathematics

Master writing linear equations from data through these 3 detailed exercises and comprehensive summary.

Solution: Exercises 1 to 3
1 From Table Data
Exercise 1
Write a linear equation for the data in this table:
x y
0 5
1 8
2 11
3 14
Definition:

Linear relationship: A relationship where the rate of change between x and y is constant

Slope (m): The constant rate of change, calculated as (y₂ - y₁)/(x₂ - x₁)

Y-intercept (b): The value of y when x = 0

Equation writing method:
  1. Verify the relationship is linear by checking for constant rate of change
  2. Identify the y-intercept (value of y when x = 0)
  3. Calculate the slope using any two points
  4. Write the equation in y = mx + b form
  5. Verify with other points in the table
Rate
8-5=3, 11-8=3, 14-11=3
Slope
m = 3
Y-int
b = 5
Step 1: Check for constant rate of change

From (0, 5) to (1, 8): 8 - 5 = 3

From (1, 8) to (2, 11): 11 - 8 = 3

From (2, 11) to (3, 14): 14 - 11 = 3

Since the rate of change is constant (3), this is a linear relationship

Step 2: Identify the y-intercept

When x = 0, y = 5

Therefore, the y-intercept b = 5

Step 3: Calculate the slope

Using any two points, for example (0, 5) and (1, 8)

Slope m = (8 - 5)/(1 - 0) = 3/1 = 3

Step 4: Write the equation

Using y = mx + b with m = 3 and b = 5

Equation: y = 3x + 5

Step 5: Verify the equation

Check with point (2, 11): y = 3(2) + 5 = 6 + 5 = 11 ✓

Check with point (3, 14): y = 3(3) + 5 = 9 + 5 = 14 ✓

Applied rules:

• Linear test: Rate of change must be constant for all consecutive points

• Y-intercept: Value of y when x = 0

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)

Tip 1: Always check that the rate of change is constant before assuming linearity
Tip 2: When x = 0 appears in the table, the y-value is the y-intercept
2 From Two Points
Exercise 2
Write a linear equation for the line passing through points (2, 7) and (5, 13).
Definition:

Point-slope form: y - y₁ = m(x - x₁) using one point and slope

Two-point form: Use two points to find slope, then convert to slope-intercept

Points
(2, 7) and (5, 13)
Slope
m = 2
Equation
y = 2x + 3
Step 1: Calculate the slope

Using the slope formula: m = (y₂ - y₁)/(x₂ - x₁)

Let (x₁, y₁) = (2, 7) and (x₂, y₂) = (5, 13)

m = (13 - 7)/(5 - 2) = 6/3 = 2

Step 2: Use point-slope form

Using point (2, 7) and slope m = 2

y - 7 = 2(x - 2)

Step 3: Convert to slope-intercept form

y - 7 = 2(x - 2)

y - 7 = 2x - 4

y = 2x - 4 + 7

y = 2x + 3

Step 4: Verify with both points

Check with (2, 7): y = 2(2) + 3 = 4 + 3 = 7 ✓

Check with (5, 13): y = 2(5) + 3 = 10 + 3 = 13 ✓

Applied rules:

• Slope formula: m = (y₂ - y₁)/(x₂ - x₁) for any two points

• Point-slope form: y - y₁ = m(x - x₁)

• Conversion: Solve for y to get slope-intercept form

Tip 1: You can use either point in the point-slope form; you'll get the same final equation
Tip 2: Always verify your equation with both original points
3 From Graph
Exercise 3
Write a linear equation for the line shown on the graph that passes through points (0, -2) and (4, 6).
Definition:

Graph reading: Identify two clear points from the line to determine the equation

Y-intercept from graph: The point where the line crosses the y-axis

Points
(0, -2) and (4, 6)
Slope
m = 2
Equation
y = 2x - 2
Step 1: Identify two points from the graph

From the graph, we can see the line passes through (0, -2) and (4, 6)

Point (0, -2) is particularly useful since it's the y-intercept

Step 2: Calculate the slope

Using points (0, -2) and (4, 6)

m = (6 - (-2))/(4 - 0) = 8/4 = 2

Step 3: Identify the y-intercept

Since the line passes through (0, -2), the y-intercept is b = -2

Step 4: Write the equation

Using y = mx + b with m = 2 and b = -2

Equation: y = 2x - 2

Step 5: Verify the equation

Check with point (0, -2): y = 2(0) - 2 = -2 ✓

Check with point (4, 6): y = 2(4) - 2 = 8 - 2 = 6 ✓

Applied rules:

• Y-intercept identification: Look for where the line crosses the y-axis (x = 0)

• Slope calculation: Use any two points on the line

• Graph reading: Choose points with integer coordinates when possible

Tip 1: Always look for the y-intercept first when reading from a graph
Tip 2: Choose points that are clearly marked on grid lines for accuracy
Linear Equations: Methods & Techniques
y = mx + b
Slope-Intercept Form
Slope Formula
m = (y₂ - y₁)/(x₂ - x₁)
Rate of change between two points
Point-Slope Form
y - y₁ = m(x - x₁)
Using one point and slope
Y-Intercept
b = y-value when x = 0
Point where line crosses y-axis
Key Definitions:

Slope-intercept form: y = mx + b where m is slope and b is y-intercept

Point-slope form: y - y₁ = m(x - x₁) using one point and slope

Slope: Rate of change, calculated as rise over run

Y-intercept: Point where line crosses y-axis (x = 0)

From table: Calculate rate of change, find y-intercept when x = 0
From two points: Calculate slope, then use point-slope form
From graph: Read points, calculate slope and y-intercept
Linear test: Rate of change must be constant
Writing Methods:
  1. Table method: Calculate constant rate of change, identify y-intercept
  2. Two-point method: Calculate slope, use point-slope form
  3. Graph method: Read points from graph, calculate slope and y-intercept
  4. Verification: Check equation with original data points
Comprehensive Summary: Writing Linear Equations from Data

Complete Learning Summary

Key Definitions

Linear equation: An equation that forms a straight line when graphed, typically in the form y = mx + b.

Slope (m): The rate of change between variables, calculated as rise over run or (change in y)/(change in x).

Y-intercept (b): The value of y when x = 0, where the line crosses the y-axis.

Constant rate of change: The characteristic of linear relationships where y changes by the same amount for each unit change in x.

Point-slope form: An alternative form of linear equations: y - y₁ = m(x - x₁).

Core Rules & Principles

Rule 1: For a relationship to be linear, the rate of change between consecutive points must be constant.

Rule 2: In y = mx + b, m represents the slope and b represents the y-intercept.

Rule 3: Slope can be calculated using any two points on the line: m = (y₂ - y₁)/(x₂ - x₁).

Rule 4: The y-intercept is the value of y when x = 0.

Rule 5: All points on the line must satisfy the linear equation.

Step-by-Step Methods

Method 1 (From table): Check for constant rate of change, identify y-intercept when x = 0, calculate slope, write y = mx + b.

Method 2 (From two points): Calculate slope using the slope formula, use point-slope form, convert to slope-intercept form.

Method 3 (From graph): Read two clear points, calculate slope, identify y-intercept, write y = mx + b.

Method 4 (Verification): Substitute original data points into the equation to verify accuracy.

Examples & Applications

Table example: If x increases by 1 and y increases by 3 consistently, slope m = 3.

Two-point example: Points (1, 2) and (3, 8) → m = (8-2)/(3-1) = 3 → y = 3x - 1.

Graph example: Line crossing (0, 4) and (2, 10) → slope = 3, y-intercept = 4 → y = 3x + 4.

Real-world application: Cost = Rate × Time + Fixed cost (linear relationship).

Tips & Common Mistakes

Tip 1: Always verify that the rate of change is constant before assuming linearity.

Tip 2: When x = 0 appears in a table, that y-value is automatically the y-intercept.

Mistake 1: Forgetting to check that the rate of change is truly constant across all data points.

Mistake 2: Incorrectly calculating slope by mixing up x and y values in the formula.

Memory Aids

Memory trick: "y equals m-x plus b" - remember slope comes first, then y-intercept.

Visualization: Think of slope as "how much y changes when x increases by 1".

Pattern recognition: Look for constant differences in consecutive y-values when x increases by 1.

Verification: Always substitute a point back into your equation to check your work.

Questions & Answers

Question: How do I know if data in a table represents a linear relationship? What if the rate of change isn't obvious?

Answer: To determine if data is linear, calculate the rate of change between consecutive points:

Step 1: Calculate (y₂ - y₁) for each pair of consecutive points

Step 2: Calculate (x₂ - x₁) for each pair

Step 3: Compute (y₂ - y₁)/(x₂ - x₁) for each pair

Step 4: If all calculated values are the same, the relationship is linear

If the rate of change varies, the relationship is not linear. For example, if one pair gives rate = 2 and another gives rate = 3, it's not linear.

Question: What if I can't read the y-intercept directly from a graph? How do I find it?

Answer: If the y-intercept isn't visible on the graph, follow these steps:

Step 1: Identify any two points on the line

Step 2: Calculate the slope using m = (y₂ - y₁)/(x₂ - x₁)

Step 3: Use the point-slope form: y - y₁ = m(x - x₁)

Step 4: Simplify to get y = mx + b form, where b is the y-intercept

Alternatively, once you have the slope, use the equation y = mx + b with one known point to solve for b.

Question: I sometimes get confused about which point to use when I have two points. Does it matter?

Answer: No, it doesn't matter which point you use in the point-slope form! You'll get the same final equation.

Example: Points (2, 5) and (4, 9) with slope m = 2

  • Using (2, 5): y - 5 = 2(x - 2) → y = 2x + 1
  • Using (4, 9): y - 9 = 2(x - 4) → y = 2x + 1

Both approaches yield the same equation. Choose the point that makes calculations easier (often the one with smaller numbers).