Solved Exercises on Volume Calculations in Grade 8

Master volume calculations: prisms, cylinders, pyramids, cones, and spheres through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Rectangular prism volume
Exercise 1
Find the volume of a rectangular prism with length 6 cm, width 4 cm, and height 5 cm.
Definition:

Rectangular prism: A three-dimensional figure with six rectangular faces, also known as a rectangular box.

Volume: The amount of space occupied by a three-dimensional object, measured in cubic units.

Volume calculation method:
  1. Identify the dimensions: length, width, and height
  2. Apply the formula: Volume = length × width × height
  3. Substitute the values into the formula
  4. Perform the multiplication
  5. Include the appropriate cubic units
Dimensions
Length = 6 cm, Width = 4 cm, Height = 5 cm
Formula
V = l × w × h
Substitute
V = 6 × 4 × 5
Calculate
V = 120
Step 1: Identify the dimensions

Length (l) = 6 cm, Width (w) = 4 cm, Height (h) = 5 cm

Step 2: Apply the rectangular prism volume formula

Volume = length × width × height

Step 3: Substitute the values

V = 6 × 4 × 5

Step 4: Perform the multiplication

V = 24 × 5 = 120

Step 5: Include units

Volume = 120 cubic centimeters or 120 cm³

V = 120 cm³
Final answer:

The volume of the rectangular prism is 120 cubic centimeters

Applied rules:

• Volume Formula: For rectangular prism: V = lwh

• Unit Consistency: All measurements must be in the same unit

• Cubic Units: Volume is always expressed in cubic units

TIP: Remember that volume is the space inside a 3D object.
COMMON MISTAKE: Don't forget to cube the units (cm³, m³, etc.).
2 Cylinder volume
Exercise 2
Find the volume of a cylinder with radius 3 cm and height 8 cm. Use π ≈ 3.14.
Definition:

Cylinder: A three-dimensional figure with two parallel circular bases connected by a curved surface.

Base Area: The area of the circular base, calculated as πr².

Dimensions
Radius = 3 cm, Height = 8 cm
Formula
V = πr²h
Substitute
V = π × 3² × 8
Calculate
V ≈ 226.08
Step 1: Identify the dimensions

Radius (r) = 3 cm, Height (h) = 8 cm

Step 2: Apply the cylinder volume formula

Volume = π × radius² × height

Step 3: Substitute the values

V = π × 3² × 8 = π × 9 × 8

Step 4: Perform the calculation

V = 72π ≈ 72 × 3.14 = 226.08

Step 5: Include units

Volume ≈ 226.08 cubic centimeters or 226.08 cm³

V ≈ 226.08 cm³
Final answer:

The volume of the cylinder is approximately 226.08 cubic centimeters

Applied rules:

• Cylinder Formula: V = πr²h

• Circle Area: Base area = πr²

• Approximation: Use π ≈ 3.14 for calculations

TIP: Think of a cylinder as a stack of circles (base area × height).
COMMON MISTAKE: Don't confuse radius with diameter (radius = diameter ÷ 2).
3 Pyramid volume
Exercise 3
Find the volume of a square pyramid with base edge length 6 cm and height 10 cm.
Definition:

Square pyramid: A three-dimensional figure with a square base and triangular faces meeting at an apex.

Base Area: For a square base, area = side².

Dimensions
Base edge = 6 cm, Height = 10 cm
Formula
V = ⅓ × Base Area × Height
Substitute
V = ⅓ × 6² × 10
Calculate
V = 120
Step 1: Identify the dimensions

Base edge length = 6 cm, Height = 10 cm

Step 2: Calculate the base area

Base area = (edge length)² = 6² = 36 cm²

Step 3: Apply the pyramid volume formula

Volume = ⅓ × base area × height

Step 4: Substitute the values

V = ⅓ × 36 × 10

Step 5: Perform the calculation

V = (36 × 10) ÷ 3 = 360 ÷ 3 = 120

Step 6: Include units

Volume = 120 cubic centimeters or 120 cm³

V = 120 cm³
Final answer:

The volume of the square pyramid is 120 cubic centimeters

Applied rules:

• Pyramid Formula: V = ⅓ × Base Area × Height

• Square Base: Area = side²

• One-Third Rule: Pyramids have ⅓ the volume of prisms with same base and height

TIP: Remember that pyramids are ⅓ the volume of a prism with the same base and height.
COMMON MISTAKE: Don't forget the ⅓ factor in the pyramid formula.
Volume Formulas and Methods
\(V = lwh\)
Prism Volume
\(V = \pi r^2 h\)
Cylinder Volume
Prism
\(V = Bh\)
Base Area × Height
Cylinder
\(V = \pi r^2 h\)
π × Radius² × Height
Pyramid
\(V = \frac{1}{3}Bh\)
⅓ × Base Area × Height
All Volume Formulas:
Prism: V = Bh
Cylinder: V = πr²h
Pyramid: V = ⅓Bh
Cone: V = ⅓πr²h
Sphere: V = (4/3)πr³
Key definitions:

Volume: The measure of space occupied by a three-dimensional object, expressed in cubic units

Base Area (B): The area of the bottom face of a 3D figure

Height (h): The perpendicular distance from the base to the top of the figure

Radius (r): The distance from the center of a circle to its edge

Complete methodology:
  1. Identify the shape: Determine which 3D figure you're working with
  2. Select the formula: Choose the appropriate volume formula
  3. Measure dimensions: Find the necessary measurements (length, width, height, radius)
  4. Substitute values: Plug measurements into the formula
  5. Calculate: Perform the mathematical operations
  6. Include units: Express the answer in cubic units
Volume Relationships: Pyramids and cones have ⅓ the volume of prisms/cylinders with same base and height.
Unit Cubing: Always cube the linear units (cm³, m³, ft³, etc.).
Volume Calculation Rules:

• Prism Formula: V = Base Area × Height

• Cylinder Formula: V = πr²h

• Pyramid Formula: V = ⅓ × Base Area × Height

• Cone Formula: V = ⅓πr²h

• Sphere Formula: V = (4/3)πr³

Solution: Exercises 4 to 5
4 Cone volume
Exercise 4
Find the volume of a cone with radius 4 cm and height 9 cm. Use π ≈ 3.14.
Definition:

Cone: A three-dimensional figure with a circular base and a single vertex (apex) connected by a curved surface.

Relationship to Cylinder: A cone has ⅓ the volume of a cylinder with the same base and height.

Dimensions
Radius = 4 cm, Height = 9 cm
Formula
V = ⅓πr²h
Substitute
V = ⅓π × 4² × 9
Calculate
V ≈ 150.72
Step 1: Identify the dimensions

Radius (r) = 4 cm, Height (h) = 9 cm

Step 2: Apply the cone volume formula

Volume = ⅓ × π × radius² × height

Step 3: Substitute the values

V = ⅓ × π × 4² × 9 = ⅓ × π × 16 × 9

Step 4: Perform the calculation

V = ⅓ × 144π = 48π ≈ 48 × 3.14 = 150.72

Step 5: Include units

Volume ≈ 150.72 cubic centimeters or 150.72 cm³

V ≈ 150.72 cm³
Final answer:

The volume of the cone is approximately 150.72 cubic centimeters

Applied rules:

• Cone Formula: V = ⅓πr²h

• Circle Area: Used in the base area calculation

• One-Third Rule: Cones have ⅓ the volume of cylinders with same base and height

TIP: Cones are like pyramids but with circular bases instead of polygonal bases.
COMMON MISTAKE: Don't forget the ⅓ factor in the cone formula.
5 Sphere volume
Exercise 5
Find the volume of a sphere with radius 5 cm. Use π ≈ 3.14.
Definition:

Sphere: A perfectly round three-dimensional figure where every point on the surface is equidistant from the center.

Radius: The distance from the center to any point on the sphere's surface.

Dimension
Radius = 5 cm
Formula
V = (4/3)πr³
Substitute
V = (4/3)π × 5³
Calculate
V ≈ 523.33
Step 1: Identify the dimension

Radius (r) = 5 cm

Step 2: Apply the sphere volume formula

Volume = (4/3) × π × radius³

Step 3: Substitute the value

V = (4/3) × π × 5³ = (4/3) × π × 125

Step 4: Perform the calculation

V = (4 × 125π)/3 = 500π/3 ≈ (500 × 3.14)/3 ≈ 1570/3 ≈ 523.33

Step 5: Include units

Volume ≈ 523.33 cubic centimeters or 523.33 cm³

V ≈ 523.33 cm³
Final answer:

The volume of the sphere is approximately 523.33 cubic centimeters

Applied rules:

• Sphere Formula: V = (4/3)πr³

• Cubing the Radius: The radius is cubed in the formula

• Constant Factor: The (4/3) factor is specific to spheres

TIP: Remember that the sphere formula has the (4/3) factor and r³.
COMMON MISTAKE: Don't confuse the sphere formula with the circle area formula (πr²).
Volume Calculation Laws, Methods, and Definitions
\(V_{\text{prism}} = Bh\)
Prism Volume
\(V_{\text{sphere}} = \frac{4}{3}\pi r^3\)
Sphere Volume
Key definitions:

Volume: The measure of space occupied by a three-dimensional object, expressed in cubic units

Base Area (B): The area of the bottom face of a 3D figure, varies by shape

Height (h): The perpendicular distance from the base to the opposite face or apex

Radius (r): The distance from the center of a circular base to its edge

Complete methodology:
  1. Identify the 3D shape: Determine if prism, cylinder, pyramid, cone, or sphere
  2. Recall the appropriate formula: Match the shape to its volume formula
  3. Measure required dimensions: Obtain length, width, height, radius, etc.
  4. Substitute values into formula: Replace variables with measured values
  5. Perform calculations: Follow order of operations carefully
  6. Express answer in cubic units: Include appropriate unit³ notation
Tip 1: For prisms and cylinders, volume = base area × height.
Tip 2: For pyramids and cones, volume = ⅓(base area × height).
Tip 3: Always cube the linear units (cm³, m³, ft³, etc.).
Tip 4: Remember that spheres have the unique formula involving (4/3) and r³.
Common errors: Forgetting to cube the radius, missing the ⅓ factor, confusing formulas.
Exam preparation: Memorize all volume formulas, practice with various shapes.
Volume Calculation Rules:

• Prism Formula: V = Base Area × Height

• Cylinder Formula: V = πr²h

• Pyramid Formula: V = ⅓(Base Area × Height)

• Cone Formula: V = ⅓πr²h

• Sphere Formula: V = (4/3)πr³

Questions & Answers

Question: Why do pyramids and cones have ⅓ in their volume formulas but prisms and cylinders don't?

Answer: This is a fascinating geometric relationship! It comes from the way the shapes are constructed:

  • Prisms/Cylinders: Have constant cross-sectional area from base to top
  • Pyramids/Cones: Have cross-sectional areas that decrease from base to apex
  • Geometric Proof: A pyramid/cone fits exactly 3 times into a prism/cylinder with the same base and height

Think of it this way: if you had a prism and a pyramid with the same base and height, you could fill the pyramid with water and pour it into the prism 3 times to fill it completely.

This is why the volume of pyramids and cones is ⅓ of the corresponding prism or cylinder.

Question: How do I remember all these different volume formulas? They seem so complicated!

Answer: Here are some memory strategies for volume formulas:

  • Group by pattern: Prisms/Cylinders: Base × Height; Pyramids/Cones: ⅓(Base × Height)
  • Remember the core: Most volumes are some form of Base Area × Height
  • Sphere is unique: Only one with (4/3)πr³ - think "sphere special"
  • Practice with shapes: Visualize each 3D figure

Also, notice that pyramids and cones both have the ⅓ factor because they're similar shapes - one with a polygonal base (pyramid) and one with a circular base (cone).

Write the formulas repeatedly and practice with different problems until they become natural!

Question: What's the difference between surface area and volume? They both deal with 3D shapes.

Answer: Surface area and volume are different measurements:

  • Surface Area: Measures the total area of all the faces/surfaces of a 3D shape (2D measurement)
  • Volume: Measures the space inside a 3D shape (3D measurement)
  • Units: Surface area is in square units (cm², m²), volume is in cubic units (cm³, m³)

Think of it this way: Surface area is like wrapping paper needed to cover a box, while volume is like how much you can fit inside the box.

Both are important but measure different aspects of 3D shapes.

Question: How do I know which dimension is the radius of a cylinder? Sometimes they give diameter instead.

Answer: This is a very common source of confusion! Here's how to identify the radius:

  • Radius (r): Distance from center of circular base to edge
  • Diameter (d): Distance across the circle through the center
  • Relationship: d = 2r, or r = d/2

Always look for the key words "radius" or "diameter" in the problem. If diameter is given, divide by 2 to get the radius.

For example, if a cylinder has a diameter of 10 cm, the radius is 5 cm. Use the radius (not diameter) in volume formulas.

When in doubt, draw the shape and label the measurements to visualize the relationship.

Question: Do I always need to use 3.14 for π, or can I leave my answer in terms of π?

Answer: It depends on the instructions given in the problem:

  • If told to approximate: Use π ≈ 3.14 and give decimal answer
  • If asked for exact answer: Leave answer in terms of π
  • If no instruction given: Either form is acceptable, but decimals are often preferred for real-world applications

For example: Volume = 100π cm³ (exact) vs Volume ≈ 314 cm³ (approximate).

In standardized tests, pay attention to whether they ask for "exact" or "approximate" answers.

Complete Summary: Volume of 3D Shapes

Key Concepts and Definitions:

Volume: The amount of space occupied by a three-dimensional object, measured in cubic units (cm³, m³, ft³, etc.).

Three-Dimensional Shape: A geometric figure that has length, width, and height (depth).

Base Area (B): The area of the bottom face of a 3D figure, which varies depending on the shape of the base.

Height (h): The perpendicular distance from the base to the top of the figure, measured along the axis of the shape.

Volume Formulas Summary:
Prism: V = Base Area × Height
Cylinder: V = πr²h
Pyramid: V = ⅓(Base Area × Height)
Cone: V = ⅓πr²h
Sphere: V = (4/3)πr³
Core Rules and Principles:

• Prism/Cylinder Rule: Volume = Base Area × Height

• Pyramid/Cone Rule: Volume = ⅓(Base Area × Height) - always smaller than corresponding prism/cylinder

• Sphere Rule: Volume = (4/3)πr³ - unique formula with r³ and (4/3) factor

• Unit Consistency: All measurements must be in the same unit before calculating

• Cubic Units: Volume is always expressed in cubic units (units³)

Step-by-Step Methods:
  1. Identify the 3D Shape: Determine whether it's a prism, cylinder, pyramid, cone, or sphere
  2. Select the Appropriate Formula: Choose the formula that matches the identified shape
  3. Measure Required Dimensions: Obtain all necessary measurements (length, width, height, radius)
  4. Verify Unit Consistency: Ensure all measurements are in the same unit
  5. Substitute Values: Replace variables in the formula with measured values
  6. Perform Calculations: Follow order of operations carefully, especially with fractions and π
  7. Include Proper Units: Express the final answer in cubic units
Multiple Examples:
Rectangular Prism: Length = 4 cm, Width = 3 cm, Height = 2 cm → V = 4×3×2 = 24 cm³
Cylinder: Radius = 2 cm, Height = 5 cm → V = π×2²×5 = 20π ≈ 62.8 cm³
Square Pyramid: Base edge = 6 cm, Height = 4 cm → V = ⅓×(6²)×4 = 48 cm³
Cone: Radius = 3 cm, Height = 8 cm → V = ⅓π×3²×8 = 24π ≈ 75.36 cm³
Sphere: Radius = 3 cm → V = (4/3)π×3³ = 36π ≈ 113.04 cm³
Tips and Tricks: Remember that pyramids and cones have ⅓ the volume of prisms/cylinders with same base and height.
Common Pitfalls: Don't confuse radius with diameter, always cube the units, don't forget the ⅓ factor.
Memory Aid: "Pointy things" (pyramids/cones) have ⅓ the volume of "flat tops" (prisms/cylinders).
Key Takeaways: Volume measures the space inside 3D shapes. Each shape has a specific formula, but many follow the pattern of base area times height. Remember that pyramids and cones have ⅓ the volume of corresponding prisms and cylinders, and spheres have their own unique formula. Always include cubic units in your final answer.