One-step equation: An equation that requires only one operation to solve for the variable. The goal is to isolate the variable on one side of the equation.
- Identify the operation being performed on the variable
- Perform the inverse operation on both sides of the equation
- Simplify both sides to isolate the variable
- Verify the solution by substituting back into the original equation
The equation is x + 7 = 15
The variable x has 7 added to it.
The inverse of addition is subtraction.
Subtract 7 from both sides: x + 7 - 7 = 15 - 7
On the left side: x + 7 - 7 = x
On the right side: 15 - 7 = 8
So: x = 8
Substitute x = 8 into the original equation: 8 + 7 = 15
15 = 15 ✓ The solution is correct.
The solution to the equation x + 7 = 15 is x = 8.
The solution to the equation x + 7 = 15 is x = 8. When we substitute 8 for x in the original equation, we get 8 + 7 = 15, which is true.
• Inverse operations: Addition and subtraction are inverse operations
• Balance principle: Whatever is done to one side of the equation must be done to the other side
• Verification: Always check the solution by substituting back into the original equation
One-step equation with multiplication: An equation where the variable is multiplied by a coefficient. To solve, divide both sides by the coefficient to isolate the variable.
The equation is 3x = 21
The variable x is multiplied by 3.
The inverse of multiplication is division.
Divide both sides by 3: (3x)/3 = 21/3
On the left side: (3x)/3 = x
On the right side: 21/3 = 7
So: x = 7
Substitute x = 7 into the original equation: 3(7) = 21
21 = 21 ✓ The solution is correct.
The solution to the equation 3x = 21 is x = 7.
The solution to the equation 3x = 21 is x = 7. When we substitute 7 for x in the original equation, we get 3(7) = 21, which is true.
• Inverse operations: Multiplication and division are inverse operations
• Balance principle: Whatever is done to one side of the equation must be done to the other side• Verification: Always check the solution by substituting back into the original equation
Two-step equation: An equation that requires two operations to solve for the variable. We need to "undo" operations in reverse order of operations (PEMDAS/BODMAS).
The equation is 2x + 5 = 17
Operations on x: multiply by 2, then add 5
First, undo the addition of 5 by subtracting 5 from both sides:
2x + 5 - 5 = 17 - 5
2x = 12
Now, undo the multiplication by 2 by dividing both sides by 2:
(2x)/2 = 12/2
x = 6
Substitute x = 6 into the original equation: 2(6) + 5 = 17
12 + 5 = 17
17 = 17 ✓ The solution is correct.
The solution to the equation 2x + 5 = 17 is x = 6.
The solution to the equation 2x + 5 = 17 is x = 6. When we substitute 6 for x in the original equation, we get 2(6) + 5 = 12 + 5 = 17, which is true.
• Reverse order of operations: Undo operations in reverse order (SADMEP)
• Balance principle: Whatever is done to one side must be done to the other
• Verification: Always check the solution by substituting back into the original equation
Linear equation: An equation where the highest exponent of the variable is 1.
One-step equation: An equation that requires only one operation to solve for the variable.
Two-step equation: An equation that requires two operations to solve for the variable.
Inverse operations: Operations that undo each other (addition/subtraction, multiplication/division).
- One-step equations: Use inverse operation once to isolate the variable
- Two-step equations: Use inverse operations twice in reverse order of operations
- Verification: Substitute solution back into original equation
- Check: Ensure both sides of the equation are equal
• Inverse operations: Addition and subtraction are inverses; multiplication and division are inverses
• Balance principle: Perform the same operation to both sides of an equation
• Order for two-step equations: Undo addition/subtraction first, then multiplication/division
Two-step equation with division: An equation where the variable is divided by a number and another operation is performed. We need to undo operations in reverse order.
The equation is (x/4) - 3 = 5
Operations on x: divide by 4, then subtract 3
First, undo the subtraction of 3 by adding 3 to both sides:
(x/4) - 3 + 3 = 5 + 3
x/4 = 8
Now, undo the division by 4 by multiplying both sides by 4:
(x/4) × 4 = 8 × 4
x = 32
Substitute x = 32 into the original equation: (32/4) - 3 = 5
8 - 3 = 5
5 = 5 ✓ The solution is correct.
The solution to the equation (x/4) - 3 = 5 is x = 32.
The solution to the equation (x/4) - 3 = 5 is x = 32. When we substitute 32 for x in the original equation, we get (32/4) - 3 = 8 - 3 = 5, which is true.
• Reverse order of operations: Undo operations in reverse order (SADMEP)
• Inverse operations: Division and multiplication are inverse operations
• Balance principle: Whatever is done to one side must be done to the other
Two-step equation with negative coefficient: An equation where the variable has a negative coefficient. The same solving principles apply, but be careful with negative signs.
The equation is -2x + 8 = -4
Operations on x: multiply by -2, then add 8
First, undo the addition of 8 by subtracting 8 from both sides:
-2x + 8 - 8 = -4 - 8
-2x = -12
Now, undo the multiplication by -2 by dividing both sides by -2:
(-2x)/(-2) = (-12)/(-2)
x = 6
Substitute x = 6 into the original equation: -2(6) + 8 = -4
-12 + 8 = -4
-4 = -4 ✓ The solution is correct.
The solution to the equation -2x + 8 = -4 is x = 6.
The solution to the equation -2x + 8 = -4 is x = 6. When we substitute 6 for x in the original equation, we get -2(6) + 8 = -12 + 8 = -4, which is true.
• Reverse order of operations: Undo operations in reverse order (SADMEP)
• Division by negative: Dividing both sides by a negative number flips the signs
• Balance principle: Whatever is done to one side must be done to the other
What are Linear Equations? Linear equations are equations where the highest exponent of the variable is 1. They can be written in the form ax + b = c, where a, b, and c are constants and a ≠ 0.
Types of Linear Equations:
- One-step equations: Require only one operation to solve (x + a = b, ax = b, x/a = b)
- Two-step equations: Require two operations to solve (ax + b = c, ax - b = c, etc.)
Solving One-Step Equations:
- Identify the operation being performed on the variable
- Apply the inverse operation to both sides of the equation
- Simplify both sides to isolate the variable
- Verify by substituting the solution back into the original equation
Solving Two-Step Equations:
- Identify all operations being performed on the variable
- Undo operations in reverse order of operations (SADMEP)
- First undo addition/subtraction, then undo multiplication/division
- Isolate the variable on one side of the equation
- Verify by substituting the solution back into the original equation
Verification Process:
- Substitute the solution back into the original equation
- Simplify both sides of the equation
- Check that both sides are equal
- If equal, the solution is correct; if not, recheck your work
One-step: x + 5 = 12 → x = 7
One-step: 3x = 18 → x = 6
Two-step: 2x + 3 = 11 → x = 4
Two-step: (x/2) - 4 = 6 → x = 20
• Forgetting to perform the same operation to both sides
• Not following the correct order of operations for two-step equations
• Making arithmetic errors with negative numbers
• Forgetting to verify the solution
Questions & Answers
Question: I get confused about which operation to do first when solving two-step equations. How do I know the order?
Answer: The key is to reverse the order of operations (PEMDAS/BODMAS). When solving equations, we use "SADMEP" (Subtraction/Addition/Division/Multiplication/Exponents/Parentheses) - essentially reversing PEMDAS:
- First, undo addition and subtraction (whichever comes first in the equation)
- Then, undo multiplication and division (whichever comes first in the equation)
For example, in the equation 3x + 7 = 22:
- x is multiplied by 3, then 7 is added
- To solve, we do the opposite in reverse order: subtract 7 first, then divide by 3
- 3x + 7 = 22 → 3x = 15 → x = 5
Always undo operations in the reverse order they were applied to the variable.
Question: Why do I need to do the same thing to both sides of the equation? Can't I just do it to one side?
Answer: An equation represents a balance - both sides are equal. If you only change one side, the balance is broken and the equation is no longer true:
Think of an equation like a physical balance scale. If you have 5 apples on each side (5 = 5), and you add 2 apples to only one side, the scale is no longer balanced (5 ≠ 7).
For example, with the equation x + 3 = 8:
- If we subtract 3 from only the left side: x + 3 - 3 = 8, which gives us x = 8
- But substituting back: 8 + 3 = 11, not 8, so this is wrong
- If we subtract 3 from both sides: x + 3 - 3 = 8 - 3, which gives us x = 5
- Checking: 5 + 3 = 8 ✓ This maintains the balance
The fundamental principle is that an equation must remain balanced at all times.
Question: How do I handle equations with negative coefficients like -3x = 12?
Answer: Equations with negative coefficients are solved the same way as with positive coefficients, but you must be careful with signs:
For -3x = 12:
- Divide both sides by -3: (-3x)/(-3) = 12/(-3)
- Left side: (-3x)/(-3) = x
- Right side: 12/(-3) = -4
- So x = -4
Important rules when dividing by negatives:
- Negative ÷ Negative = Positive
- Positive ÷ Negative = Negative
- Negative ÷ Positive = Negative
Always verify: -3(-4) = 12 ✓
The negative coefficient doesn't change the solving method, just be careful with the signs during division.