Solved Exercises on Function Notation and Tables in Grade 8

Master function notation and tables: f(x) notation, function evaluation, function tables, domain, range, and function rules through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Function Notation
Exercise 1
Given f(x) = 3x - 2, find f(5), f(-3), and f(0)
Definition:

Function notation: f(x) reads as "f of x" and represents the output value when x is the input

Evaluation method:
  1. Identify the function rule: f(x) = 3x - 2
  2. Replace x with the given input value
  3. Perform the arithmetic operations
  4. Simplify to get the output
Function
f(x) = 3x - 2
Evaluate
f(5) = ?
Step 1: Substitute x = 5

f(5) = 3(5) - 2

Step 2: Perform multiplication

3(5) = 15

Step 3: Subtract the constant

15 - 2 = 13

f(5) = 13
Step 4: Evaluate f(-3)

f(-3) = 3(-3) - 2 = -9 - 2 = -11

Step 5: Evaluate f(0)

f(0) = 3(0) - 2 = 0 - 2 = -2

Final answer:

f(5) = 13, f(-3) = -11, f(0) = -2

Applied rules:

• Function notation: f(x) represents the output when x is the input

• Substitution: Replace every occurrence of x with the input value

• Order of operations: Perform multiplication before addition/subtraction

Tip 1: Always use parentheses when substituting negative numbers to avoid sign errors.
Tip 2: Think of f(x) as a machine that transforms input x into output f(x).
2 Function Table Completion
Exercise 2
Complete the table for g(x) = x² + 2x - 1
x: -2, -1, 0, 1, 2
g(x): ?, ?, ?, ?, ?
Definition:

Function table: A table showing input values (domain) and corresponding output values (range)

Function
g(x) = x² + 2x - 1
Table
Complete
Step 1: Evaluate for x = -2

g(-2) = (-2)² + 2(-2) - 1 = 4 - 4 - 1 = -1

Step 2: Evaluate for x = -1

g(-1) = (-1)² + 2(-1) - 1 = 1 - 2 - 1 = -2

Step 3: Evaluate for x = 0

g(0) = (0)² + 2(0) - 1 = 0 + 0 - 1 = -1

Step 4: Evaluate for x = 1

g(1) = (1)² + 2(1) - 1 = 1 + 2 - 1 = 2

Step 5: Evaluate for x = 2

g(2) = (2)² + 2(2) - 1 = 4 + 4 - 1 = 7

x -2 -1 0 1 2
g(x) -1 -2 -1 2 7
Final answer:

Complete table: (-2,-1), (-1,-2), (0,-1), (1,2), (2,7)

Applied rules:

• Function evaluation: Substitute each input value into the function

• Order of operations: Powers first, then multiplication, then addition/subtraction

• Sign handling: Be careful with negative numbers raised to powers

Tip 1: Always substitute carefully, especially with negative inputs.
Tip 2: Check your work by verifying that the pattern makes sense.
3 Finding Input from Output
Exercise 3
If h(x) = 2x + 5 and h(x) = 13, find the value of x
Definition:

Input/Output relationship: If h(x) = output, then x is the input that produces that output

Function
h(x) = 2x + 5
Output
h(x) = 13
Find
x = ?
Step 1: Set up equation

If h(x) = 13, then 2x + 5 = 13

Step 2: Subtract 5 from both sides

2x + 5 - 5 = 13 - 5 → 2x = 8

Step 3: Divide both sides by 2

2x ÷ 2 = 8 ÷ 2 → x = 4

Step 4: Verify the answer

h(4) = 2(4) + 5 = 8 + 5 = 13 ✓

x = 4
Final answer:

The input value is 4

Applied rules:

• Reverse operations: To find input from output, solve the equation

• Equality preservation: Perform the same operation on both sides

• Verification: Always check your answer by substituting back

Tip 1: To find input from output, set f(x) equal to the output and solve for x.
Tip 2: Always verify by substituting your answer back into the original function.
Key Concepts: Function Notation and Tables
f: x → y
Function Mapping
Key definitions:

Function: A relation where each input has exactly one output

Function notation: f(x) represents the output when x is the input

Domain: Set of all possible input values

Range: Set of all possible output values

Function evaluation:
  1. Identify the function rule: Find the expression that defines f(x)
  2. Substitute the input: Replace x with the given value
  3. Calculate the output: Perform the operations
  4. Simplify: Get the final result
Function notation: f(x), g(x), h(x) are common function names
Function tables: Organize inputs and outputs systematically
One-to-one relationship: Each input maps to exactly one output
Tip 1: Remember that f(x) is just another way of writing y.
Tip 2: Always check your function evaluations by substituting back.
Solution: Exercises 4 to 5
4 Interpreting Function Tables
Exercise 4
Given the function table, find the function rule:
x: 1, 2, 3, 4
f(x): 4, 7, 10, 13
Definition:

Function rule: The mathematical expression that describes how inputs map to outputs

Table
Analyze pattern
Pattern
Find rule
Rule
f(x) = ?
Step 1: Observe the input changes

x increases by 1 each time (1→2→3→4)

Step 2: Observe the output changes

f(x) increases by 3 each time (4→7→10→13)

Step 3: Identify the pattern

For each increase of 1 in x, f(x) increases by 3, so slope = 3

Step 4: Find the y-intercept

Using point (1,4): 4 = 3(1) + b → 4 = 3 + b → b = 1

Step 5: Write the function rule

f(x) = 3x + 1

f(x) = 3x + 1
Final answer:

The function rule is f(x) = 3x + 1

Applied rules:

• Rate of change: Calculate how much output changes per unit input change

• Linear function: If rate of change is constant, function is linear

• Point-slope form: Use any known point to find the y-intercept

Tip 1: Look for consistent differences in output values to identify linear functions.
Tip 2: Always verify your rule by checking it against all given points.
5 Composite Function Evaluation
Exercise 5
Given f(x) = x + 2 and g(x) = 2x - 1, find f(g(3)) and g(f(3))
Definition:

Composite function: Applying one function to the result of another: f(g(x))

Given
f(x) = x + 2, g(x) = 2x - 1
Find
f(g(3)) and g(f(3))
Step 1: Find f(g(3)) - evaluate g(3) first

g(3) = 2(3) - 1 = 6 - 1 = 5

Step 2: Use result as input for f

f(g(3)) = f(5) = 5 + 2 = 7

Step 3: Find g(f(3)) - evaluate f(3) first

f(3) = 3 + 2 = 5

Step 4: Use result as input for g

g(f(3)) = g(5) = 2(5) - 1 = 10 - 1 = 9

Step 5: Compare results

f(g(3)) = 7 and g(f(3)) = 9, so f(g(x)) ≠ g(f(x)) in general

f(g(3)) = 7 and g(f(3)) = 9
Final answer:

f(g(3)) = 7 and g(f(3)) = 9

Applied rules:

• Order of operations: Work from inside out in composite functions

• Function composition: f(g(x)) means "apply g first, then apply f to the result"

• Non-commutativity: Generally, f(g(x)) ≠ g(f(x))

Tip 1: For composite functions f(g(x)), evaluate g(x) first, then use that result as input to f.
Tip 2: Function composition is generally not commutative: order matters!
Comprehensive Guide to Function Notation and Tables
f: x → y
Function Mapping
Key definitions:

Function: A relation where each element of the domain is paired with exactly one element of the range

Function notation: f(x) represents the output when x is the input

Domain: Set of all possible input values (x-values)

Range: Set of all possible output values (y-values)

Function table: Organized representation of input-output pairs

Complete methodology:
  1. Identify the function: Recognize the relationship between input and output
  2. Determine the domain: Find all possible input values
  3. Evaluate for specific inputs: Substitute values into the function
  4. Create function tables: Organize inputs and outputs systematically
  5. Find function rules: Identify patterns from tables or points
Tip 1: Remember that f(x) is just another way of writing y, representing the output.
Tip 2: Functions can be represented in multiple ways: equation, table, graph, or ordered pairs.
Tip 3: The domain tells you what values you CAN use as input, while the range tells you what outputs you CAN get.
Tip 4: Always verify your function evaluations by substituting back into the original equation.
Common errors: Confusing domain and range, forgetting order of operations when evaluating, mistaking relations for functions when they aren't, forgetting that function composition is not commutative.
Exam preparation: Practice function evaluation, understand domain restrictions, master function notation, learn to identify functions from various representations, and understand function composition.
Essential formulas and rules:

• Function notation: f(x) means "the function of x" or "f of x"

• Domain restrictions: For √x, domain is x ≥ 0; for 1/x, domain is x ≠ 0

• Function equality: Two functions are equal if they have the same domain and produce the same output for every input

• Composite functions: f(g(x)) means apply g first, then apply f to the result

• Function identification: Each input must map to exactly one output

Detailed Summary: Function Notation and Tables

Key Definitions

Function: A relation where each input (x-value) corresponds to exactly one output (y-value). This is the fundamental rule that distinguishes functions from other relations.

Function Notation: f(x) is read as "f of x" and represents the output value when x is the input. It's equivalent to y in equations.

Domain: The set of all possible input values (x-values) for which the function is defined.

Range: The set of all possible output values (y-values) that the function can produce.

Function Table: A tabular representation showing input values and their corresponding output values.

Core Rules and Principles

Function Rule: Each input has exactly one output. This is the defining characteristic of a function.

Substitution Principle: To evaluate f(a), substitute a for every occurrence of x in the function rule.

Order of Operations: When evaluating functions, follow PEMDAS/BODMAS: Parentheses, Exponents, Multiplication/Division, Addition/Subtraction.

Function Composition: f(g(x)) means apply g first, then apply f to the result. Note: f(g(x)) ≠ g(f(x)) in general.

Domain Restrictions: Some functions have limitations on their domains (e.g., square roots require non-negative inputs, denominators cannot be zero).

Step-by-Step Methods

Evaluating Functions: 1) Identify the function rule, 2) Substitute the input value for x, 3) Perform operations following order of operations, 4) Simplify to get the output.

Creating Function Tables: 1) Select input values, 2) Apply the function rule to each input, 3) Record the input-output pairs, 4) Verify accuracy by checking calculations.

Finding Function Rules from Tables: 1) Calculate rate of change between consecutive points, 2) If constant, it's linear (y = mx + b), 3) Use any point to find the y-intercept, 4) Write the rule.

Working with Composite Functions: 1) Identify the inner and outer functions, 2) Evaluate the inner function first, 3) Use the result as input for the outer function, 4) Simplify the final result.

Examples and Applications

Simple Example: If f(x) = 2x + 3, then f(4) = 2(4) + 3 = 8 + 3 = 11.

Advanced Example: If f(x) = x² - 1 and g(x) = 3x + 2, then f(g(1)) = f(3(1) + 2) = f(5) = 5² - 1 = 25 - 1 = 24.

Real-world Application: A function might model the cost of buying x items where C(x) = 5x + 10 represents $5 per item plus $10 shipping.

Table Example: For f(x) = x + 1, if x = {1, 2, 3}, then f(x) = {2, 3, 4} forming the ordered pairs (1,2), (2,3), (3,4).

Tips and Common Pitfalls

Tips: Always use parentheses when substituting negative numbers to avoid sign errors. Think of functions as machines that transform inputs into outputs. Check your work by substituting your answer back into the original function.

Common Mistakes: Forgetting to apply operations to negative numbers properly (e.g., (-2)² = 4, not -4). Mixing up domain and range. Assuming function composition is commutative. Not following order of operations when evaluating complex functions.

Pitfalls to Avoid: Treating f(x) as f × x (it's not multiplication). Forgetting that each input must map to exactly one output. Assuming that all relations are functions.

Key Notes for Memorization

Memory Aid: "F of X" means "function of x" - it's the output when x is the input. Think: "What does the function give me when I put x in?"

Quick Rules: Domain = inputs, Range = outputs. Each input has ONE output. f(g(x)) means g first, then f. Order matters!

Visual Memory: Picture a function as a machine with an input slot and an output slot. Whatever goes in gets transformed according to the function rule.

Verification Strategy: Always check your function evaluations by substituting your answer back into the original function to ensure it works.

Questions & Answers

Question: I'm confused about function notation. Why do we write f(x) instead of just y? What's the advantage?

Answer: Great question! While f(x) and y often represent the same concept, function notation offers several advantages:

  • Clarity: f(x) explicitly shows that the output depends on the input x
  • Multiple functions: You can have f(x), g(x), h(x) to represent different functions simultaneously
  • Specific evaluation: f(3) clearly means "evaluate the function f when x=3"
  • Operations: Makes function composition clearer: f(g(x)) vs trying to express this with just y

Example: If f(x) = x² and g(x) = 2x + 1, you can easily distinguish between them and compute f(2) = 4 and g(2) = 5. With just y, you'd need extra context.

Function notation is more precise and allows for clearer mathematical communication, especially as problems become more complex.

Question: How do I find the function rule from a table of values? Is there a systematic way to do this?

Answer: Yes, there is a systematic approach for finding function rules from tables:

  • Check for linear functions: Calculate the difference between consecutive y-values. If it's constant, the function is linear (y = mx + b)
  • Find the slope (m): Change in y divided by change in x between any two points
  • Find the y-intercept (b): Use the equation y = mx + b and any point to solve for b
  • For quadratic functions: If first differences aren't constant, calculate second differences. If second differences are constant, it's quadratic

Example: If x: 1, 2, 3, 4 and y: 4, 7, 10, 13:

  • First differences: 7-4=3, 10-7=3, 13-10=3 (constant!)
  • So m = 3
  • Using point (1,4): 4 = 3(1) + b, so b = 1
  • Function rule: f(x) = 3x + 1

Always verify by checking that your rule works for all given points!

Question: What's the difference between f(g(x)) and f(x)·g(x)? Are they the same thing?

Answer: These are completely different operations:

  • Composition f(g(x)): Apply g to x first, then apply f to the result of g(x)
  • Multiplication f(x)·g(x): Evaluate f(x) and g(x) separately, then multiply the results

Example: Let f(x) = x + 1 and g(x) = 2x

  • f(g(x)) = f(2x) = (2x) + 1 = 2x + 1 (composition)
  • f(x)·g(x) = (x + 1)·(2x) = 2x² + 2x (multiplication)

These yield completely different results! Composition creates a new function by chaining operations, while multiplication combines the outputs of two functions at the same input.

The notation is crucial: parentheses indicate composition, while the dot (·) or juxtaposition indicates multiplication.