Linear Equation in Slope-Intercept Form: An equation of the form y = mx + b, where m is the slope (rate of change) and b is the y-intercept (initial value when x = 0).
- Identify two points on the line from the graph
- Calculate the slope using m = (y₂ - y₁)/(x₂ - x₁)
- Identify the y-intercept (where line crosses y-axis)
- Substitute m and b into y = mx + b
- Verify equation with another point on the line
Point 1: (0, 4) - y-intercept
Point 2: (2, 7)
m = (y₂ - y₁)/(x₂ - x₁)
m = (7 - 4)/(2 - 0) = 3/2
The line crosses the y-axis at (0, 4), so b = 4
y = mx + b
y = (3/2)x + 4
Check with point (2, 7): y = (3/2)(2) + 4 = 3 + 4 = 7 ✓
The equation of the line is y = (3/2)x + 4. The slope is 3/2 and the y-intercept is 4.
• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
• Y-Intercept: Value of y when x = 0
• Slope-Intercept Form: y = mx + b
| x | y |
|---|---|
| 0 | -2 |
| 1 | 3 |
| 2 | 8 |
| 3 | 13 |
Linear Relationship in Table: A relationship where the rate of change (slope) between any two points is constant. The y-intercept occurs when x = 0.
Using any two points: (0, -2) and (1, 3)
m = (3 - (-2))/(1 - 0) = 5/1 = 5
Check between (1,3) and (2,8): m = (8-3)/(2-1) = 5/1 = 5 ✓
Check between (2,8) and (3,13): m = (13-8)/(3-2) = 5/1 = 5 ✓
When x = 0, y = -2, so b = -2
Using y = mx + b with m = 5 and b = -2
y = 5x - 2
For x = 0: y = 5(0) - 2 = -2 ✓
For x = 1: y = 5(1) - 2 = 3 ✓
For x = 2: y = 5(2) - 2 = 8 ✓
For x = 3: y = 5(3) - 2 = 13 ✓
The equation is y = 5x - 2. The rate of change (slope) is 5, and the initial value (y-intercept) is -2.
• Constant Rate: For linear relationships, the slope is the same between any two points
• Y-Intercept: The value of y when x = 0
• Verification: All table points must satisfy the equation
Point-Slope Method: When given two points, first calculate the slope, then use point-slope form y - y₁ = m(x - x₁), and finally convert to slope-intercept form y = mx + b.
Using m = (y₂ - y₁)/(x₂ - x₁)
m = (-3 - 5)/(3 - (-1)) = -8/4 = -2
Using point (-1, 5): y - 5 = -2(x - (-1))
y - 5 = -2(x + 1)
y - 5 = -2x - 2
y = -2x - 2 + 5
y = -2x + 3
Point (-1, 5): y = -2(-1) + 3 = 2 + 3 = 5 ✓
Point (3, -3): y = -2(3) + 3 = -6 + 3 = -3 ✓
The equation in slope-intercept form is y = -2x + 3
The equation of the line passing through (-1, 5) and (3, -3) is y = -2x + 3. The slope is -2 and the y-intercept is 3.
• Slope Formula: m = (y₂ - y₁)/(x₂ - x₁)
• Point-Slope Form: y - y₁ = m(x - x₁)
• Algebraic Simplification: Distribute and combine like terms
Linear Equation: An equation that forms a straight line when graphed
Slope (m): The rate of change of y with respect to x, calculated as rise over run
Y-Intercept (b): The value of y when x = 0, the point where the line crosses the y-axis
Rate of Change: How much the dependent variable changes for a unit change in the independent variable
Initial Value: The value of the dependent variable when the independent variable is zero (y-intercept)
Point-Slope Form: A linear equation written as y - y₁ = m(x - x₁)
Standard Form: A linear equation written as Ax + By = C where A, B, C are integers
Linear Function: A function with a constant rate of change
- Identify available information: Determine if you have a graph, table, two points, or contextual information
- Find the slope: Use appropriate method based on available data
- Find the y-intercept: Identify where the line crosses the y-axis or solve for b
- Write the equation: Substitute m and b into y = mx + b
- Verify: Check that the equation fits the original data
• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)
• Slope-intercept form: y = mx + b
• Point-slope form: y - y₁ = m(x - x₁)
• Y-intercept: (0, b)
• X-intercept: Solve 0 = mx + b for x
Linear Model: A linear equation that represents a real-world situation. Identify the initial value (y-intercept) and rate of change (slope) from the problem context.
Independent variable: h (hours)
Dependent variable: C (total cost)
The setup fee is $15, paid even if h = 0
This is the y-intercept: b = 15
The cost increases by $8 for each additional hour
This is the slope: m = 8
Using y = mx + b with y = C, x = h, m = 8, b = 15
C = 8h + 15
Slope (m = 8): The cost increases by $8 for each additional hour
Y-intercept (b = 15): The initial cost is $15 before any hours are worked
The equation is C = 8h + 15. The slope of 8 represents the hourly rate ($8 per hour), and the y-intercept of 15 represents the initial setup fee ($15).
• Modeling: Identify initial value and rate of change from context
• Linear Relationships: y = mx + b where m is rate and b is starting value
• Contextual Interpretation: Explain slope and intercept in real-world terms
Mixed Information: When given one point and the y-intercept, find the slope using the slope formula, then write the equation using the known y-intercept.
Y-intercept: b = -4, so one point is (0, -4)
Other point: (5, 11)
m = (11 - (-4))/(5 - 0) = 15/5 = 3
Using y = mx + b with m = 3 and b = -4
y = 3x - 4
| x | y = 3x - 4 | y |
|---|---|---|
| -1 | 3(-1) - 4 | -7 |
| 0 | 3(0) - 4 | -4 |
| 1 | 3(1) - 4 | -1 |
| 2 | 3(2) - 4 | 2 |
| 3 | 3(3) - 4 | 5 |
Check (5, 11): y = 3(5) - 4 = 15 - 4 = 11 ✓
The equation is y = 3x - 4. The slope is 3 and the y-intercept is -4. The table of values demonstrates the linear relationship.
• Two-Point Method: Use y-intercept as one point and given point as second
• Algebraic Substitution: Insert known values to find unknowns
• Verification: Check equation with original data
Linear Function: A function of the form f(x) = mx + b, where m and b are constants
Slope: The measure of steepness of a line, calculated as rise over run
Y-Intercept: The point where the graph crosses the y-axis (x = 0)
X-Intercept: The point where the graph crosses the x-axis (y = 0)
Rate of Change: How one quantity changes in relation to another quantity
Direct Variation: A linear function where b = 0 (passes through origin)
Constant Function: A linear function where m = 0 (horizontal line)
- Identify the form: Determine if equation is in slope-intercept form
- Extract parameters: Identify slope (m) and y-intercept (b)
- Interpret meaning: Understand what m and b represent in context
- Graph systematically: Use y-intercept and slope to plot points
- Verify solution: Check that points satisfy the original equation
• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)
• Slope-intercept form: y = mx + b
• Point-slope form: y - y₁ = m(x - x₁)
• Standard form: Ax + By = C
• X-intercept: Solve y = 0
• Y-intercept: Solve x = 0
Comprehensive Summary: Writing Linear Equations
- Linear Equation: An equation that forms a straight line when graphed, typically in the form y = mx + b.
- Slope (m): The rate of change of y with respect to x, calculated as rise over run (vertical change divided by horizontal change).
- Y-Intercept (b): The value of y when x = 0, representing the point (0, b) where the line crosses the y-axis.
- Rate of Change: How much the dependent variable (y) changes for a unit change in the independent variable (x).
- Initial Value: The starting value of a function when the independent variable is zero (the y-intercept).
- Point-Slope Form: A linear equation written as y - y₁ = m(x - x₁), useful when given a point and slope.
- Standard Form: A linear equation written as Ax + By = C where A, B, and C are integers.
- Linear Function: A function with a constant rate of change, graphed as a straight line.
- Direct Variation: A special linear function where y = mx (no constant term, passes through origin).
- Constant Function: A linear function where y = b (slope is zero, horizontal line).
- Slope Formula: m = (y₂ - y₁)/(x₂ - x₁) for any two points on the line
- Slope-Intercept Form: y = mx + b directly shows slope and y-intercept
- Point-Slope Form: y - y₁ = m(x - x₁) uses one point and the slope
- Y-Intercept Identification: Found by setting x = 0 in the equation
- X-Intercept Identification: Found by setting y = 0 in the equation
- Parallel Lines: Have equal slopes (m₁ = m₂)
- Perpendicular Lines: Have slopes that are negative reciprocals (m₁ × m₂ = -1)
- Linear Growth: Positive slope indicates increasing relationship
- Linear Decay: Negative slope indicates decreasing relationship
- Identify given information: Determine if you have a graph, table, two points, or contextual information
- Find the slope: Use appropriate method (slope formula, table pattern, or graph rise/run)
- Find the y-intercept: Identify where line crosses y-axis or solve for b using known point
- Write the equation: Substitute m and b into y = mx + b
- Verify the equation: Check that it satisfies all given points or conditions
- Interpret in context: Understand what slope and intercept mean in real-world problems
- From Two Points: Points (2,5) and (4,9) → m=(9-5)/(4-2)=2, using (2,5): 5=2(2)+b → b=1 → y=2x+1
- From Graph: Y-intercept (0,3), slope from (0,3) to (2,7): m=(7-3)/(2-0)=2 → y=2x+3
- From Table: If x increases by 1 and y increases by 4 consistently, slope=4, y-intercept from x=0 column
- From Context: $10 initial fee + $3 per item → y=3x+10 where slope=3 (rate) and y-int=10 (initial)
- From Point and Intercept: Point (3,8) and y-intercept -1 → m=(8-(-1))/(3-0)=3 → y=3x-1
- Advanced Example: Line through (1,4) perpendicular to y=2x+5 → New slope = -1/2 → y-4=(-1/2)(x-1) → y=(-1/2)x+4.5
- Tip 1: Always start by identifying what information you have (two points, graph, table, context).
- Tip 2: In tables, if x-values increase by 1, the change in y-values equals the slope.
- Tip 3: On graphs, pick lattice points (integer coordinates) for easier calculations.
- Tip 4: The y-intercept is always the point (0, b).
- Tip 5: Verify your equation by substituting original points back into it.
- Pitfall 1: Mixing up x and y coordinates when calculating slope.
- Pitfall 2: Forgetting to simplify to slope-intercept form.
- Pitfall 3: Not considering the sign of the slope (positive vs negative).
- Pitfall 4: Confusing rate of change with initial value.
- Memory Aid: "Y equals MX plus B" - Y-intercept is B, Slope is M
- Slope Direction: Positive = uphill, Negative = downhill, Zero = flat, Undefined = vertical
- Steepness: Larger |m| = steeper line
- Intercepts: X-intercept found by setting y=0, Y-intercept found by setting x=0
- Parallel/Perpendicular: Parallel = same slope, Perpendicular = negative reciprocal
- Real-World Meaning: Slope = rate of change, Y-intercept = starting value
- Verification: Always check that your equation works for the given data points
Questions & Answers
Question: How do I know if I calculated the slope correctly? What should I check?
Answer: Here are ways to verify your slope calculation:
- Direction Check: Does the sign match the graph? Positive slope should rise from left to right.
- Steepness Check: Does the magnitude match the visual steepness?
- Alternative Pair: Use a different pair of points from the same line to calculate slope - should get the same result.
- Equation Check: Substitute the slope and a point into y = mx + b to see if it holds true.
If all checks pass, your slope is likely correct.
Question: How do I identify the rate of change and initial value from a word problem?
Answer: Look for these clues:
- Rate of Change (Slope): Words like "per", "each", "every", "for each", "at a rate of"
- Initial Value (Y-Intercept): Words like "starting", "initial", "beginning", "fixed", "setup", "base", "flat fee"
Example: "$5 per hour plus $20 setup fee" → Rate = 5, Initial = 20 → y = 5x + 20
Question: What if the table doesn't start with x = 0? How do I find the y-intercept?
Answer: You can still find the y-intercept using the point-slope method:
- First, calculate the slope using any two points from the table
- Then use the point-slope form with one point: y - y₁ = m(x - x₁)
- Finally, rearrange to slope-intercept form to identify b
Example: If table shows (2, 7) and (4, 11), slope = (11-7)/(4-2) = 2. Using point (2,7): y - 7 = 2(x - 2), so y = 2x + 3. Y-intercept is 3.