Solved Exercises on Interpreting Slope and Y-Intercept in Context in Grade 8

Master interpreting slope and y-intercept in context: analyzing real-world scenarios and understanding mathematical relationships through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Car rental scenario
Exercise 1
A car rental company charges a $30 base fee plus $0.25 per mile driven. Write an equation and interpret the slope and y-intercept.
Definition:

Linear model: An equation of the form \(y = mx + b\) where \(m\) is the slope (rate of change) and \(b\) is the y-intercept (initial value).

Solution method:
  1. Identify the dependent and independent variables
  2. Identify the rate of change (slope)
  3. Identify the initial value (y-intercept)
  4. Write the equation in slope-intercept form
  5. Interpret the meaning of each component in context
Variables
Cost = 0.25(miles) + 30
Equation
\(y = 0.25x + 30\)
Slope
\(m = 0.25\)
Y-intercept
\(b = 30\)
Step 1: Identify variables

Independent variable (x): Number of miles driven

Dependent variable (y): Total cost of rental

Step 2: Identify the rate of change

The cost increases by $0.25 for each mile driven.

So, the slope is \(m = 0.25\).

Step 3: Identify the initial value

Even if you drive 0 miles, you pay a base fee of $30.

So, the y-intercept is \(b = 30\).

Step 4: Write the equation

Substituting into \(y = mx + b\):

\(y = 0.25x + 30\)

Step 5: Interpret in context

Slope: The cost increases by $0.25 for each mile driven.

Y-intercept: The base fee is $30 regardless of miles driven.

\(y = 0.25x + 30\)
Final answer:

The equation is \(y = 0.25x + 30\). The slope (0.25) represents $0.25 per mile, and the y-intercept (30) represents the $30 base fee.

Applied rules:

• Rate of change: Slope represents the change in y per unit change in x

• Initial value: Y-intercept is the value of y when x = 0

• Contextual interpretation: Units matter in real-world applications

2 Water tank scenario
Exercise 2
A water tank initially contains 100 gallons. Water flows out at a rate of 4 gallons per minute. Write an equation and interpret the slope and y-intercept.
Definition:

Decay model: A linear model where the dependent variable decreases over time, indicated by a negative slope.

Variables
Water = -4(time) + 100
Equation
\(y = -4x + 100\)
Slope
\(m = -4\)
Y-intercept
\(b = 100\)
Step 1: Identify variables

Independent variable (x): Time in minutes

Dependent variable (y): Amount of water in gallons

Step 2: Identify the rate of change

Water decreases by 4 gallons each minute.

So, the slope is \(m = -4\) (negative because water is decreasing).

Step 3: Identify the initial value

Initially, the tank contains 100 gallons.

So, the y-intercept is \(b = 100\).

Step 4: Write the equation

Substituting into \(y = mx + b\):

\(y = -4x + 100\)

Step 5: Interpret in context

Slope: The water level decreases by 4 gallons per minute.

Y-intercept: Initially, the tank has 100 gallons of water.

Step 6: Consider domain restrictions

The model is only valid while water is present in the tank.

When \(y = 0\): \(0 = -4x + 100\), so \(x = 25\)

The tank will be empty after 25 minutes.

\(y = -4x + 100\)
Final answer:

The equation is \(y = -4x + 100\). The slope (-4) represents a loss of 4 gallons per minute, and the y-intercept (100) represents the initial 100 gallons.

Applied rules:

• Negative slope: Indicates a decreasing relationship

• Domain restrictions: Real-world models may have limitations

• Units: Include appropriate units when interpreting

3 Savings account scenario
Exercise 3
Sarah starts with $50 in her savings account and deposits $15 each week. Write an equation and interpret the slope and y-intercept.
Definition:

Growth model: A linear model where the dependent variable increases over time, indicated by a positive slope.

Variables
Balance = 15(weeks) + 50
Equation
\(y = 15x + 50\)
Slope
\(m = 15\)
Y-intercept
\(b = 50\)
Step 1: Identify variables

Independent variable (x): Number of weeks

Dependent variable (y): Balance in the account

Step 2: Identify the rate of change

The balance increases by $15 each week.

So, the slope is \(m = 15\).

Step 3: Identify the initial value

Initially, Sarah has $50 in the account.

So, the y-intercept is \(b = 50\).

Step 4: Write the equation

Substituting into \(y = mx + b\):

\(y = 15x + 50\)

Step 5: Interpret in context

Slope: The balance increases by $15 per week.

Y-intercept: Initially, Sarah had $50 in the account.

Step 6: Predict future values

After 8 weeks: \(y = 15(8) + 50 = 120 + 50 = 170\)

After 8 weeks, Sarah will have $170 in her account.

\(y = 15x + 50\)
Final answer:

The equation is \(y = 15x + 50\). The slope (15) represents adding $15 per week, and the y-intercept (50) represents the initial $50.

Applied rules:

• Positive slope: Indicates an increasing relationship

• Prediction: Use the equation to predict future values

• Real-world meaning: Always connect math to the situation

Rules and methods, laws,...
y = mx + b
Linear Model
Component
y
Dependent variable
Component
m
Slope (rate of change)
Component
x
Independent variable
Component
b
Y-intercept (initial value)
Key Concept: The slope represents the rate of change in the real-world scenario.
Y-intercept Meaning: The initial value or starting point when x = 0.
Units: Always include appropriate units when interpreting slope and y-intercept.
Detailed Summary: Interpreting Slope and Y-Intercept in Context
y = mx + b
General Form
Key definitions:

Linear Model: An equation that describes a linear relationship between two variables in a real-world context.

Slope (m): The rate of change of the dependent variable with respect to the independent variable. In real-world contexts, it represents the "per-unit" rate.

Y-intercept (b): The value of the dependent variable when the independent variable is zero. Often represents an initial value or starting point.

Rate of Change: How one quantity changes in relation to another quantity. The slope represents the constant rate of change in a linear model.

Independent Variable (x): The input variable that influences the dependent variable.

Dependent Variable (y): The output variable that depends on the independent variable.

Domain Restriction: Limitations on the values that the independent variable can take based on the real-world context.

Complete methodology:
  1. Identify variables: Determine which variable is independent and which is dependent
  2. Find the rate of change: Identify how the dependent variable changes per unit of the independent variable
  3. Find the initial value: Determine the value of the dependent variable when the independent variable is 0
  4. Write the equation: Express in the form \(y = mx + b\)
  5. Interpret the slope: Describe what the rate of change means in context
  6. Interpret the y-intercept: Describe what the initial value means in context
  7. Consider limitations: Identify any domain restrictions or constraints
Tip 1: The slope always has units of "y-units per x-units".
Tip 2: The y-intercept has the same units as the dependent variable.
Tip 3: A positive slope indicates growth/increase, negative indicates decay/decrease.
Tip 4: Always verify that your interpretation makes sense in the real-world context.
Common errors: Confusing slope and y-intercept meanings, omitting units, misidentifying variables, ignoring negative slopes.
Exam preparation: Practice identifying variables quickly, focus on the meaning of slope and y-intercept in context, pay attention to units.
Properties to know by heart:

• Slope interpretation: Rate of change = change in y / change in x

• Y-intercept interpretation: Initial value when x = 0

• Positive slope: Increasing relationship

• Negative slope: Decreasing relationship

• Zero slope: No change (horizontal line)

• Units: Slope has units of y-units per x-units

• Context: Always relate mathematical values back to the real-world situation

Questions & Answers

Question: How do I know which variable should be x and which should be y in a word problem?

Answer: Generally, the independent variable (x) is the one that influences or causes changes in the other variable. The dependent variable (y) is what changes in response.

Ask yourself: "Which variable affects the other?" The affecting variable is x, the affected variable is y.

Examples:
- Time and distance: Time affects distance → x = time, y = distance
- Hours worked and earnings: Hours affect earnings → x = hours, y = earnings
- Temperature and ice cream sales: Temperature affects sales → x = temperature, y = sales

The independent variable is often the one you can control or measure directly, while the dependent variable is what you're trying to predict or understand.

Question: What if the y-intercept doesn't make sense in the real-world context? For example, if it's negative?

Answer: This can happen, and it's important to think about what it means:

Sometimes a negative y-intercept still makes mathematical sense in the model, even if it doesn't make practical sense for x = 0. The y-intercept represents the theoretical value when x = 0, but the model might not be valid at x = 0.

For example, if modeling a business profit that starts with debt, a negative y-intercept could represent the initial debt. While negative profit doesn't make sense in reality at start-up, it represents the financial state before any revenue.

Always consider the domain of the function in the real world. The model might only be valid for positive x values, even if the mathematical line extends to x = 0.

If the y-intercept truly makes no sense in the context, double-check your equation setup.

Question: How do I determine the units for slope and y-intercept?

Answer: The units for slope and y-intercept are determined by the variables in your equation:

Y-intercept units: The same as the units of the dependent variable (y).

Slope units: Units of y divided by units of x (y-units per x-unit).

Examples:
- Cost vs. miles: y = 0.25x + 30
- Y-intercept: $30 (dollars)
- Slope: $0.25 per mile (dollars per mile)

- Water volume vs. time: y = -4x + 100
- Y-intercept: 100 gallons
- Slope: -4 gallons per minute (gallons per minute)

- Savings vs. weeks: y = 15x + 50
- Y-intercept: $50 (dollars)
- Slope: $15 per week (dollars per week)

Always include units in your interpretations!