Solved Exercises on Slope-Intercept Form (y = mx + b) in Grade 8

Master slope-intercept form: identifying slope and y-intercept, converting to standard form, and graphing equations through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Identifying slope and y-intercept
Exercise 1
For the equation \(y = -3x + 7\), identify the slope and y-intercept.
Definition:

Slope-intercept form: The equation \(y = mx + b\) where \(m\) is the slope and \(b\) is the y-intercept.

Solution method:
  1. Compare the given equation to the standard form \(y = mx + b\)
  2. Identify the coefficient of x as the slope (m)
  3. Identify the constant term as the y-intercept (b)
Standard form
\(y = mx + b\)
Given equation
\(y = -3x + 7\)
Identify m and b
\(m = -3, b = 7\)
Step 1: Compare to standard form

Standard form: \(y = mx + b\)

Given equation: \(y = -3x + 7\)

Step 2: Identify the slope (m)

The coefficient of x is -3.

So, \(m = -3\).

Step 3: Identify the y-intercept (b)

The constant term (value when x = 0) is 7.

So, \(b = 7\).

Step 4: Interpret the values

Slope = -3: For every 1 unit increase in x, y decreases by 3 units.

Y-intercept = 7: The line crosses the y-axis at (0, 7).

Slope: \(m = -3\), Y-intercept: \(b = 7\)
Final answer:

The slope is -3 and the y-intercept is 7.

Applied rules:

• Slope-intercept form: \(y = mx + b\)

• Slope (m): Coefficient of x

• Y-intercept (b): Constant term

2 Converting to standard form
Exercise 2
Convert the equation \(y = \frac{2}{3}x - 4\) to standard form \(Ax + By = C\).
Definition:

Standard form: The equation \(Ax + By = C\) where A, B, and C are integers, and A is typically positive.

Start with
\(y = \frac{2}{3}x - 4\)
Move x-term
\(-\frac{2}{3}x + y = -4\)
Eliminate fractions
\(-2x + 3y = -12\)
Make A positive
\(2x - 3y = 12\)
Step 1: Start with slope-intercept form

\(y = \frac{2}{3}x - 4\)

Step 2: Move the x-term to the left side

Subtract \(\frac{2}{3}x\) from both sides:

\(y - \frac{2}{3}x = -4\)

Or rearranged: \(-\frac{2}{3}x + y = -4\)

Step 3: Eliminate fractions

Multiply every term by 3 (the denominator):

\(3 \times (-\frac{2}{3}x) + 3 \times y = 3 \times (-4)\)

\(-2x + 3y = -12\)

Step 4: Make the coefficient of x positive

Multiply the entire equation by -1:

\(-1 \times (-2x + 3y) = -1 \times (-12)\)

\(2x - 3y = 12\)

Step 5: Verify the conversion

Convert back to slope-intercept form:

\(2x - 3y = 12\)

\(-3y = -2x + 12\)

\(y = \frac{2}{3}x - 4\) ✓

\(2x - 3y = 12\)
Final answer:

The standard form is \(2x - 3y = 12\).

Applied rules:

• Standard form: \(Ax + By = C\)

• Integer coefficients: Eliminate fractions by multiplying by LCD

• Positive A: Conventionally, A should be positive

3 Graphing from slope-intercept form
Exercise 3
Graph the equation \(y = \frac{1}{2}x - 3\) and identify two additional points on the line.
Definition:

Graphing linear equations: Plotting points and drawing a line through them based on the slope and y-intercept.

Identify components
\(m = \frac{1}{2}, b = -3\)
Y-intercept point
(0, -3)
Use slope to find point
(2, -2)
Another point
(4, -1)
Step 1: Identify slope and y-intercept

From \(y = \frac{1}{2}x - 3\):

Slope: \(m = \frac{1}{2}\)

Y-intercept: \(b = -3\)

Step 2: Plot the y-intercept

Plot the point (0, -3) on the y-axis.

Step 3: Use the slope to find another point

Slope = \(\frac{1}{2}\) means "rise 1, run 2"

From (0, -3), move up 1 and right 2 to get (2, -2).

Step 4: Find a third point

From (2, -2), move up 1 and right 2 to get (4, -1).

Step 5: Draw the line

Connect the points (0, -3), (2, -2), and (4, -1) with a straight line.

Extend the line in both directions.

Step 6: Verify with additional points

Check with x = -2: \(y = \frac{1}{2}(-2) - 3 = -1 - 3 = -4\)

Point (-2, -4) should be on the line. ✓

Points: (0, -3), (2, -2), (4, -1)
Final answer:

The line passes through (0, -3) with slope \(\frac{1}{2}\). Additional points include (2, -2) and (4, -1).

Applied rules:

• Y-intercept: Point where x = 0

• Slope: Rise over run determines next point

• Verification: Substitute points back into equation

Rules and methods, laws,...
y = mx + b
Slope-Intercept Form
Component
y
Dependent variable
Component
m
Slope of the line
Component
x
Independent variable
Component
b
Y-intercept
Key Concept: The slope-intercept form \(y = mx + b\) directly provides the slope and y-intercept of a line.
Slope Interpretation: Positive slope rises left to right, negative slope falls left to right.
Y-intercept: The point where the line crosses the y-axis (when x = 0).
Detailed Summary: Slope-Intercept Form (y = mx + b)
y = mx + b
General Form
Key definitions:

Linear Equation: An equation that forms a straight line when graphed, with the highest exponent of the variable being 1.

Slope-Intercept Form: The form \(y = mx + b\) where \(m\) represents the slope and \(b\) represents the y-intercept.

Slope (m): The measure of steepness of a line, calculated as the ratio of the vertical change (rise) to the horizontal change (run).

Y-intercept (b): The point where the line crosses the y-axis, occurring when \(x = 0\).

Standard Form: The form \(Ax + By = C\) where A, B, and C are integers and A is typically positive.

Point-Slope Form: The form \(y - y_1 = m(x - x_1)\) using a point and the slope.

Complete methodology:
  1. Identify components: From \(y = mx + b\), identify slope (m) and y-intercept (b)
  2. Graphing: Plot y-intercept and use slope to find additional points
  3. Converting forms: Manipulate the equation to achieve desired form
  4. Verification: Check that points satisfy the equation
Tip 1: Remember "m" stands for slope and "b" stands for y-intercept (the "b" comes from the y-value when x=0).
Tip 2: When converting to standard form, eliminate fractions by multiplying by the LCD.
Tip 3: To graph, start with the y-intercept and then use the slope to find additional points.
Tip 4: Always verify your work by substituting points back into the original equation.
Common errors: Confusing slope and y-intercept, incorrect sign of slope, miscalculating when converting forms, not eliminating fractions properly.
Exam preparation: Practice identifying m and b quickly, master the conversion process, know how to graph efficiently.
Properties to know by heart:

• Slope-intercept form: \(y = mx + b\)

• Slope (m): Determines steepness and direction of the line

• Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis

• Positive slope: Line rises from left to right

• Negative slope: Line falls from left to right

• Zero slope: Horizontal line

• Standard form conversion: Move x-term to left, eliminate fractions, make A positive

Questions & Answers

Question: How can I tell if an equation is in slope-intercept form or if I need to rearrange it?

Answer: An equation is in slope-intercept form if it's written as \(y = mx + b\) where:

1. The y variable is isolated (alone on one side)

2. The x term comes first on the other side

3. The constant term comes last

Examples in slope-intercept form:
\(y = 3x + 5\) ✓
\(y = -\frac{1}{2}x - 4\) ✓
\(y = x + 7\) (same as \(y = 1x + 7\)) ✓

Examples NOT in slope-intercept form:
\(2x + 3y = 6\) (standard form)
\(y - 3 = 2(x - 1)\) (point-slope form)
\(3y = 6x - 9\) (y not isolated with coefficient 1)

If y has a coefficient other than 1, divide everything by that coefficient to get slope-intercept form.

Question: Why do we need to convert equations to standard form? When is it useful?

Answer: Standard form (\(Ax + By = C\)) is useful in several situations:

1. Working with systems of equations: Easier to use elimination method when equations are in standard form.

2. Identifying intercepts: Set x = 0 to find y-intercept, set y = 0 to find x-intercept.

3. Computer algorithms: Many mathematical software programs prefer standard form.

4. Geometric applications: Standard form is helpful when working with perpendicular lines or distances.

5. Integer coefficients: Standard form typically uses integers, which can be easier to work with in some contexts.

However, slope-intercept form is better for graphing and understanding the behavior of the line. Both forms contain the same information about the line, just arranged differently.

Question: When graphing, what if the slope is a fraction? How do I use rise over run?

Answer: When the slope is a fraction \(\frac{a}{b}\), the "rise" is the numerator (a) and the "run" is the denominator (b).

For example, with slope \(\frac{3}{4}\):
- Rise = 3 (move up 3 units)
- Run = 4 (move right 4 units)

If the slope is negative, like \(-\frac{2}{5}\), you can think of it as:
- Rise = -2, Run = 5 (move down 2, right 5)
OR
- Rise = 2, Run = -5 (move up 2, left 5)

Both approaches give you the same line. The key is to be consistent with the direction: if you go up with the rise, go right with the run; if you go down with the rise, go right with the run.

To find points with integer coordinates when working with fractional slopes, use multiples of the denominator as your x-values.