Solved Exercises on Graphing Linear Equations in Grade 8

Master graphing linear equations: using slope-intercept form, point-slope form, standard form, and solving real-world applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Graphing using slope-intercept form
Exercise 1
Graph the linear equation \(y = -\frac{3}{2}x + 4\) by identifying the y-intercept and using the slope to find additional points.
Definition:

Graphing with slope-intercept form: A method to graph linear equations in the form \(y = mx + b\) by plotting the y-intercept (0, b) and using the slope (m) to find additional points. The slope indicates how much to rise (up/down) for every unit of run (right).

Graphing method:
  1. Identify the y-intercept (b) from the equation y = mx + b
  2. Plot the point (0, b) on the y-axis
  3. Identify the slope (m) from the equation y = mx + b
  4. Use the slope to find another point: from the y-intercept, move right by the denominator of the slope and up (or down if negative) by the numerator
  5. Draw a straight line through both points, extending in both directions
Y-intercept
(0, 4)
Slope
-3/2
Next point
(2, 1)
Step 1: Identify the y-intercept

In \(y = -\frac{3}{2}x + 4\), the y-intercept is b = 4.

Plot the point (0, 4) on the y-axis.

Step 2: Identify the slope

The slope is m = -3/2, which means "rise over run" = -3/2.

This means for every 2 units moved to the right, move 3 units down.

Step 3: Use the slope to find another point

Starting from (0, 4), move 2 units right and 3 units down:

New x-coordinate: 0 + 2 = 2

New y-coordinate: 4 + (-3) = 1

Second point: (2, 1)

Step 4: Find a third point (optional for accuracy)

From (2, 1), move 2 units right and 3 units down:

New x-coordinate: 2 + 2 = 4

New y-coordinate: 1 + (-3) = -2

Third point: (4, -2)

Step 5: Draw the line

Draw a straight line through all plotted points, extending it in both directions.

Line passes through (0, 4), (2, 1), (4, -2) with slope -3/2
Final answer:

To graph \(y = -\frac{3}{2}x + 4\): Plot the y-intercept (0, 4), then use the slope of -3/2 to find additional points by moving 2 units right and 3 units down. The line passes through points (0, 4), (2, 1), and (4, -2).

Applied rules:

• Y-intercept plotting: Always plot (0, b) first

• Slope application: Rise over run determines direction and distance to next point

• Negative slope: Line falls from left to right

Tip 1: A negative slope means the line falls from left to right.
Tip 2: You can also move in the opposite direction: 2 units left and 3 units up.
Tip 3: Plot at least 2 points to ensure accuracy when drawing the line.
2 Graphing using point-slope form
Exercise 2
Graph the linear equation \(y - 3 = -2(x - 1)\) by identifying a point and using the slope to find additional points.
Definition:

Point-slope form: The form \(y - y_1 = m(x - x_1)\) where m is the slope and \((x_1, y_1)\) is a point on the line. This form is useful when you know a point on the line and the slope.

Point
(1, 3)
Slope
-2
Next point
(2, 1)
Step 1: Identify the point and slope

In \(y - 3 = -2(x - 1)\), we can identify:

Point: \((x_1, y_1) = (1, 3)\)

Slope: m = -2

Step 2: Plot the known point

Plot the point (1, 3) on the coordinate plane.

Step 3: Use the slope to find another point

Starting from (1, 3), with slope m = -2 = -2/1:

Move 1 unit right and 2 units down:

New x-coordinate: 1 + 1 = 2

New y-coordinate: 3 + (-2) = 1

Second point: (2, 1)

Step 4: Find a third point (optional for accuracy)

From (2, 1), move 1 unit right and 2 units down:

New x-coordinate: 2 + 1 = 3

New y-coordinate: 1 + (-2) = -1

Third point: (3, -1)

Step 5: Draw the line

Draw a straight line through all plotted points, extending it in both directions.

Line passes through (1, 3), (2, 1), (3, -1) with slope -2
Final answer:

To graph \(y - 3 = -2(x - 1)\): Plot the point (1, 3), then use the slope of -2 to find additional points by moving 1 unit right and 2 units down. The line passes through points (1, 3), (2, 1), and (3, -1).

Applied rules:

• Point-slope identification: In \(y - y_1 = m(x - x_1)\), \((x_1, y_1)\) is the known point and m is the slope

• Slope application: Move right by denominator and up/down by numerator

• Negative slope: Results in a line that falls from left to right

Tip 1: Convert to slope-intercept form if you prefer that method: y = -2x + 5.
Tip 2: You can move in the opposite direction using the slope: 1 unit left and 2 units up.
Tip 3: Always verify that your original point satisfies the equation.
3 Graphing using standard form
Exercise 3
Graph the linear equation \(3x + 4y = 12\) by finding the x-intercept and y-intercept, then connecting them with a line.
Definition:

Standard form: The form \(Ax + By = C\) where A, B, and C are integers. To graph using standard form, find the x-intercept (where y = 0) and y-intercept (where x = 0), then connect these two points with a straight line.

X-intercept
(4, 0)
Y-intercept
(0, 3)
Line
Connect both
Step 1: Find the y-intercept

Set x = 0 in the equation: \(3(0) + 4y = 12\)

\(4y = 12\)

\(y = 3\)

Y-intercept: (0, 3)

Step 2: Find the x-intercept

Set y = 0 in the equation: \(3x + 4(0) = 12\)

\(3x = 12\)

\(x = 4\)

X-intercept: (4, 0)

Step 3: Plot both intercepts

Plot the y-intercept (0, 3) and x-intercept (4, 0) on the coordinate plane.

Step 4: Draw the line

Draw a straight line through both intercept points, extending it in both directions.

Step 5: Verify with a third point

Choose x = 2: \(3(2) + 4y = 12\), so \(6 + 4y = 12\), which gives \(4y = 6\), so \(y = 1.5\)

Point (2, 1.5) should lie on the line: \(3(2) + 4(1.5) = 6 + 6 = 12\) ✓

Line passes through (0, 3) and (4, 0)
Final answer:

To graph \(3x + 4y = 12\): Find the x-intercept (4, 0) and y-intercept (0, 3), then draw a straight line through both points. The line extends infinitely in both directions.

Applied rules:

• Intercept method: Set x = 0 to find y-intercept, set y = 0 to find x-intercept

• Two-point line: Two points uniquely determine a straight line

• Verification: Check that a third point satisfies the equation

Tip 1: The intercept method works well for equations in standard form.
Tip 2: If one intercept is difficult to find, you can convert to slope-intercept form.
Tip 3: Always verify your line by checking that points on the line satisfy the equation.
Rules and methods, laws,...
\(y = mx + b\)
Slope-Intercept Form
Slope Formula
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope calculation
Point-Slope Form
\(y - y_1 = m(x - x_1)\)
Given point and slope
Standard Form
\(Ax + By = C\)
General form
Key definitions:

Linear equation: An equation that forms a straight line when graphed. It has variables with exponents of 1.

Slope-intercept form: The form \(y = mx + b\) where m is the slope and b is the y-intercept.

Point-slope form: The form \(y - y_1 = m(x - x_1)\) where m is the slope and \((x_1, y_1)\) is a point on the line.

Standard form: The form \(Ax + By = C\) where A, B, and C are integers.

Complete methodology:
  1. Slope-intercept method: Plot y-intercept, use slope to find another point
  2. Point-slope method: Plot given point, use slope to find another point
  3. Intercept method: Find x and y intercepts, connect with line
  4. Table method: Create table of values, plot points
  5. Verify: Check that points satisfy the equation
Tip 1: A positive slope means the line rises from left to right.
Tip 2: A negative slope means the line falls from left to right.
Tip 3: Zero slope indicates a horizontal line (y = constant).
Tip 4: The y-intercept is always at the point (0, b).
Common errors: Misidentifying m and b, miscalculating intercepts, forgetting to change signs when applying negative slopes, plotting points incorrectly on the coordinate plane.
Exam preparation: Practice converting between forms, identifying key features from equations, and graphing using different methods.
Formulas to know by heart:

• Slope-intercept form: \(y = mx + b\)

• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

• Point-slope form: \(y - y_1 = m(x - x_1)\)

• Standard form: \(Ax + By = C\)

Solution: Exercises 4 to 5
4 Converting and graphing
Exercise 4
Convert the equation \(2x - 3y = 6\) to slope-intercept form. Then graph the equation using the slope-intercept method.
Definition:

Converting to slope-intercept form: The process of solving a linear equation for y to express it in the form \(y = mx + b\). This involves using inverse operations to isolate y on one side of the equation.

Original
2x - 3y = 6
Slope-int
y = (2/3)x - 2
Slope
2/3
Step 1: Start with the given equation

Given: \(2x - 3y = 6\)

Step 2: Isolate the y-term

Subtract 2x from both sides: \(-3y = -2x + 6\)

Step 3: Solve for y

Divide both sides by -3: \(y = \frac{-2x + 6}{-3}\)

Simplify: \(y = \frac{-2x}{-3} + \frac{6}{-3}\)

Result: \(y = \frac{2}{3}x - 2\)

Step 4: Identify slope and y-intercept

Now in the form \(y = mx + b\):

Slope (m) = 2/3 (coefficient of x)

Y-intercept (b) = -2 (constant term)

Step 5: Graph using slope-intercept method

Plot y-intercept (0, -2)

From (0, -2), use slope 2/3: move 3 units right and 2 units up to get (3, 0)

Draw line through (0, -2) and (3, 0)

Step 6: Verify the conversion

Check by substituting back: Starting with \(y = \frac{2}{3}x - 2\), multiply by 3: \(3y = 2x - 6\)

Rearrange: \(2x - 3y = 6\) ✓

y = (2/3)x - 2, slope = 2/3, y-int = -2
Final answer:

The equation \(2x - 3y = 6\) in slope-intercept form is \(y = \frac{2}{3}x - 2\). To graph: plot the y-intercept (0, -2), then use the slope of 2/3 to find another point by moving 3 units right and 2 units up to reach (3, 0). Draw the line through these points.

Applied rules:

• Inverse operations: Use addition/subtraction to move terms, multiplication/division to isolate y

• Division property: When dividing by a negative number, signs of all terms change

• Verification: Convert back to original form to check correctness

Tip 1: When dividing by a negative number, remember to change signs of all terms.
Tip 2: Always perform the same operation to both sides of the equation.
Tip 3: Check your answer by substituting a point back into the original equation.
5 Real-world application
Exercise 5
A car rental company charges $30 per day plus a $50 insurance fee. Write the equation representing the total cost C in terms of days d. Graph the equation for the first 7 days, and determine the cost for 5 days.
Definition:

Real-world linear models: Linear equations that represent situations where one quantity changes at a constant rate with respect to another. The slope often represents a rate (cost per unit time), and the y-intercept often represents an initial value or fixed cost.

Equation
C = 30d + 50
Slope
30
Y-int
50
Step 1: Identify the rate and initial value

Daily cost (rate of change) = $30 per day

Insurance fee (initial value) = $50

Step 2: Write the linear equation

Total cost = Daily rate × Number of days + Insurance fee

\(C = 30d + 50\), where C is total cost and d is number of days

Step 3: Identify slope and y-intercept

In the form \(C = 30d + 50\):

Slope (m) = 30

Y-intercept (b) = 50

Step 4: Interpret in context

Slope = 30: This means the cost increases by $30 for each additional day.

Y-intercept = 50: This is the initial cost when d = 0 (the insurance fee).

Step 5: Create table of values for graphing

d = 0: C = 30(0) + 50 = 50 → (0, 50)

d = 1: C = 30(1) + 50 = 80 → (1, 80)

d = 2: C = 30(2) + 50 = 110 → (2, 110)

d = 3: C = 30(3) + 50 = 140 → (3, 140)

d = 4: C = 30(4) + 50 = 170 → (4, 170)

d = 5: C = 30(5) + 50 = 200 → (5, 200)

d = 6: C = 30(6) + 50 = 230 → (6, 230)

d = 7: C = 30(7) + 50 = 260 → (7, 260)

Step 6: Calculate cost for 5 days

Substitute d = 5 into the equation:

\(C = 30(5) + 50 = 150 + 50 = 200\)

For 5 days, the total cost is $200.

C = 30d + 50, slope = 30, y-int = 50, 5 days = $200
Final answer:

The linear equation is \(C = 30d + 50\). The slope is 30, representing the daily cost of $30 per day. The y-intercept is 50, representing the one-time insurance fee of $50. For 5 days, the total cost is $200.

Applied rules:

• Modeling real-world problems: Identify initial value (y-intercept) and rate of change (slope)

• Context interpretation: Understand what slope and y-intercept represent in the specific scenario

• Function evaluation: Substitute the given input value to find the output

Tip 1: In real-world problems, the y-intercept often represents a fixed cost or starting value.
Tip 2: The slope represents the rate of change in real-world contexts.
Tip 3: Always check that your answer makes sense in the context of the problem.
Detailed Summary of Graphing Linear Equations
Comprehensive Concepts:

What are Linear Equations? Linear equations are equations where the highest exponent of the variable is 1. When graphed, they form straight lines. The general concept is that there's a constant rate of change between the variables x and y.

Key Forms of Linear Equations:

  • Slope-intercept form: \(y = mx + b\) - Shows slope and y-intercept directly
  • Point-slope form: \(y - y_1 = m(x - x_1)\) - Shows slope and a point on the line
  • Standard form: \(Ax + By = C\) - Coefficients are typically integers
Core Methods:

Graphing Using Slope-Intercept Form (\(y = mx + b\)):

  1. Identify the y-intercept (b) - this is the point (0, b)
  2. Plot the y-intercept on the y-axis
  3. Identify the slope (m) - this is the coefficient of x
  4. Use the slope to find another point: from the y-intercept, move right by the denominator of the slope and up (or down if negative) by the numerator
  5. Draw a straight line through both points

Graphing Using Point-Slope Form (\(y - y_1 = m(x - x_1)\)):

  1. Identify the point \((x_1, y_1)\) and the slope (m)
  2. Plot the given point on the coordinate plane
  3. Use the slope to find another point: move right by the denominator and up/down by the numerator
  4. Draw a straight line through both points

Graphing Using Standard Form (\(Ax + By = C\)):

  1. Find the y-intercept by setting x = 0 and solving for y
  2. Find the x-intercept by setting y = 0 and solving for x
  3. Plot both intercept points
  4. Draw a straight line through the intercepts
Examples:

Simple: y = 2x + 1 (plot (0,1), then move 1 right, 2 up)

With fractions: y = -(3/4)x + 2 (plot (0,2), then move 4 right, 3 down)

Point-slope: y - 3 = 2(x - 1) (plot (1,3), then move 1 right, 2 up)

Standard: 2x + 3y = 6 (intercepts: (3,0) and (0,2))

Common Pitfalls:

• Forgetting to change signs when moving terms across the equals sign

• Misidentifying the y-intercept in complex equations

• Incorrectly applying the slope (especially negative slopes)

• Making calculation errors when finding intercepts

Memory Tip: "Y am M X-tra B right" - helps remember the order in y = mx + b
Visual Tip: Positive slope = uphill, Negative slope = downhill, Zero slope = flat road
Checking Work: Always substitute points back into the original equation to verify

Questions & Answers

Question: I'm confused about when to use each method for graphing linear equations. How do I know which one to choose?

Answer: Great question! Here's a guide for choosing the best method:

  • Slope-intercept form (y = mx + b): Use this when the equation is already in this form. It's the quickest method since you can immediately identify the y-intercept and slope.
  • Point-slope form (y - y₁ = m(x - x₁)): Use this when you're given a point and the slope, or when the equation is already in this form.
  • Standard form (Ax + By = C): Use the intercept method - find x and y intercepts. This is often easiest for equations in standard form.
  • General approach: If the equation isn't in slope-intercept form, consider converting it first, especially if the coefficients are manageable.

The key is to look at the form of the equation and choose the method that requires the least amount of work for that particular equation.

Question: What if the slope is a fraction? How do I graph it accurately?

Answer: Fractional slopes are handled using the "rise over run" concept:

For slope = a/b:

  • Move horizontally by the denominator (run)
  • Move vertically by the numerator (rise)
  • Positive numerator = move up, negative numerator = move down

For example, if slope = 3/4:

  • Move 4 units right and 3 units up
  • Or move 4 units left and 3 units down

For slope = -2/3:

  • Move 3 units right and 2 units down (or 3 left and 2 up)

If the fraction is improper (numerator larger than denominator), you can still use the same approach, though the line will be steeper.

Question: How can I verify that my graph is correct after plotting the line?

Answer: There are several ways to verify your graph:

Method 1: Check your plotted points

Substitute the coordinates of each point you plotted back into the original equation to ensure they satisfy it.

Method 2: Test a new point

Choose a point that lies on your drawn line (but wasn't one of your original points), substitute its coordinates into the equation, and verify that the equation holds true.

Method 3: Check the slope

Select any two points on your line and calculate the slope using the slope formula: m = (y₂ - y₁)/(x₂ - x₁). This should match the slope in the equation.

Method 4: Verify intercepts

If using the intercept method, ensure your line crosses the axes at the calculated intercept points.

The most reliable approach is to verify that multiple points on your line satisfy the equation.