a) \(y = 3x - 2\)
b) \(y = x^2 + 1\)
c) \(2x + 3y = 6\)
d) \(y = \sqrt{x} + 4\)
Linear function: A function that can be written in the form \(y = mx + b\), where m and b are constants, and x has an exponent of 1. The graph of a linear function is always a straight line.
Standard form: A linear equation can also be written as \(Ax + By = C\), where A, B, and C are integers.
- Look for variables raised to the power of 1 only (no exponents higher than 1)
- Check for no variables under radicals (square roots, cube roots, etc.)
- Ensure no variables in denominators
- Confirm that the equation can be rearranged to the form \(y = mx + b\)
- Verify that the highest degree of any variable is 1
This is already in the form \(y = mx + b\) where m = 3 and b = -2.
✓ Variables have exponent 1, no radicals or denominators.
Therefore, this is a linear function.
The variable x has an exponent of 2.
✗ The exponent is greater than 1, which makes this a quadratic function, not linear.
Therefore, this is NOT a linear function.
Rearrange to isolate y: \(3y = -2x + 6\), then \(y = -\frac{2}{3}x + 2\)
✓ Now in the form \(y = mx + b\) where m = -2/3 and b = 2.
Therefore, this is a linear function.
The variable x is under a square root: \(\sqrt{x} = x^{1/2}\).
✗ Contains a radical, which makes this a radical function, not linear.
Therefore, this is NOT a linear function.
Linear functions: a) \(y = 3x - 2\) and c) \(2x + 3y = 6\)
Non-linear functions: b) \(y = x^2 + 1\) and d) \(y = \sqrt{x} + 4\)
Options a) \(y = 3x - 2\) and c) \(2x + 3y = 6\) are linear functions. Options b) \(y = x^2 + 1\) and d) \(y = \sqrt{x} + 4\) are not linear functions.
• Linear function form: Must be expressible as \(y = mx + b\) or \(Ax + By = C\)
• Variable constraints: Variables can only have exponent 1
• No radicals or denominators: With variables in them
Slope (m): The coefficient of x in the equation \(y = mx + b\). It measures the steepness and direction of the line.
Y-intercept (b): The constant term in the equation \(y = mx + b\). It is the point where the line crosses the y-axis (at x = 0).
X-intercept: The point where the line crosses the x-axis (at y = 0).
The equation is in the form \(y = mx + b\) where:
Slope (m) = -2 (coefficient of x)
Y-intercept (b) = 5 (constant term)
To find the x-intercept, set y = 0 and solve for x:
\(0 = -2x + 5\)
\(2x = 5\)
\(x = \frac{5}{2} = 2.5\)
So the x-intercept is at the point (2.5, 0).
The y-intercept is at (0, 5) - where the line crosses the y-axis.
The slope is -2, which means for every 1 unit right, move 2 units down.
Starting from (0, 5), move 1 right and 2 down to get (1, 3).
Draw a straight line through (0, 5) and (1, 3), extending in both directions.
For the linear function \(y = -2x + 5\): slope (m) = -2, y-intercept (b) = 5, and x-intercept = (2.5, 0). The line passes through points (0, 5) and (2.5, 0).
• Slope-intercept form: \(y = mx + b\) directly gives slope and y-intercept
• X-intercept: Set y = 0 and solve for x
• Graphing: Plot y-intercept and use slope to find another point
| x | y |
|---|---|
| -1 | 3 |
| 0 | 5 |
| 1 | 7 |
| 2 | 9 |
Linear function from table: A table represents a linear function if the rate of change (slope) between any two consecutive points is constant.
Constant rate of change: The difference in y-values divided by the difference in x-values must be the same for all pairs of consecutive points.
Calculate the rate of change between consecutive points:
Between (-1, 3) and (0, 5): \(\frac{5-3}{0-(-1)} = \frac{2}{1} = 2\)
Between (0, 5) and (1, 7): \(\frac{7-5}{1-0} = \frac{2}{1} = 2\)
Between (1, 7) and (2, 9): \(\frac{9-7}{2-1} = \frac{2}{1} = 2\)
Since the rate of change is constant (m = 2), this is a linear function.
Look for the y-value when x = 0. From the table, when x = 0, y = 5.
Therefore, the y-intercept (b) = 5.
Using the slope-intercept form \(y = mx + b\):
With m = 2 and b = 5: \(y = 2x + 5\)
Check with the points in the table:
When x = -1: \(y = 2(-1) + 5 = 3\) ✓
When x = 0: \(y = 2(0) + 5 = 5\) ✓
When x = 1: \(y = 2(1) + 5 = 7\) ✓
When x = 2: \(y = 2(2) + 5 = 9\) ✓
All points satisfy the equation \(y = 2x + 5\), confirming it's the correct linear function.
Yes, the table represents a linear function. The constant rate of change is 2, and the y-intercept is 5. The equation of the function is \(y = 2x + 5\).
• Constant rate of change: For linear functions, the slope between any two points is the same
• Y-intercept identification: When x = 0, y-value is the y-intercept
• Verification: Always check that all points satisfy the derived equation
Linear function: A function that can be written in the form \(y = mx + b\), where m and b are constants.
Slope (m): The rate of change of y with respect to x, measuring steepness and direction.
Y-intercept (b): The point where the line crosses the y-axis (x = 0).
X-intercept: The point where the line crosses the x-axis (y = 0).
- Identify linear functions: Check if equation can be written as y = mx + b
- Find slope and intercepts: From equation y = mx + b, m is slope, b is y-intercept
- From table to function: Verify constant rate of change, find y-intercept
- Graph linear functions: Plot y-intercept, use slope to find another point
- Verify results: Check that all points satisfy the equation
• Slope-intercept form: \(y = mx + b\)
• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
• Point-slope form: \(y - y_1 = m(x - x_1)\)
• Standard form: \(Ax + By = C\)
Slope-intercept form: The form \(y = mx + b\) where m is the slope and b is the y-intercept.
Function notation: Expressing a function as f(x) = mx + b instead of y = mx + b.
Given: \(3x + 2y = 6\)
Subtract 3x from both sides: \(2y = -3x + 6\)
Divide both sides by 2: \(y = \frac{-3x + 6}{2}\)
Simplify: \(y = -\frac{3}{2}x + 3\)
In the form \(y = mx + b\):
Slope (m) = \(-\frac{3}{2}\)
Y-intercept (b) = 3
Replace y with f(x): \(f(x) = -\frac{3}{2}x + 3\)
Start with our result and convert back: \(y = -\frac{3}{2}x + 3\)
Add \(\frac{3}{2}x\) to both sides: \(\frac{3}{2}x + y = 3\)
Multiply by 2: \(3x + 2y = 6\) ✓
The slope-intercept form of \(3x + 2y = 6\) is \(y = -\frac{3}{2}x + 3\). The slope is \(m = -\frac{3}{2}\) and the y-intercept is \(b = 3\). In function notation: \(f(x) = -\frac{3}{2}x + 3\).
• Algebraic manipulation: Use inverse operations to isolate y
• Standard to slope-intercept: Solve for y to convert forms
• Function notation: Replace y with f(x) to express as a function
Linear model: A linear function that represents a real-world situation where one quantity changes at a constant rate with respect to another.
Rate of change: In real-world contexts, the slope often represents a rate (cost per mile, growth per year, etc.).
Base fare (initial value) = $3
Cost per mile (rate of change/slope) = $2 per mile
Total cost = Rate × Miles + Initial value
\(C(m) = 2m + 3\), where C is the cost and m is the number of miles
Substitute m = 12 into the function:
\(C(12) = 2(12) + 3 = 24 + 3 = 27\)
The cost for a 12-mile trip is $27.
Set C(m) = 25 and solve for m:
\(25 = 2m + 3\)
\(25 - 3 = 2m\)
\(22 = 2m\)
\(m = 11\)
For $25, a passenger can travel 11 miles.
For 12 miles: \(C(12) = 2(12) + 3 = 24 + 3 = 27\) ✓
For $25: \(25 = 2(11) + 3 = 22 + 3 = 25\) ✓
The linear function representing the taxi fare is \(C(m) = 2m + 3\). A 12-mile trip costs $27, and $25 allows for a 11-mile trip.
• Modeling: Identify initial value (y-intercept) and rate of change (slope)
• Function evaluation: Substitute input value to find output
• Solving equations: Use inverse operations to find input given output
Linear function: A function that can be written in the form \(y = mx + b\), where m and b are constants. The graph of a linear function is always a straight line.
Slope (m): The rate of change of y with respect to x, measuring the steepness and direction of the line. It represents how much y changes for each unit change in x.
Y-intercept (b): The point where the line crosses the y-axis (at x = 0). It represents the initial value when x = 0.
X-intercept: The point where the line crosses the x-axis (at y = 0). Found by setting y = 0 and solving for x.
Rate of change: The ratio of the change in output to the change in input, which is equal to the slope of the linear function.
- Identify linear functions: Check if equation can be written as y = mx + b or Ax + By = C
- Find slope and intercepts: From y = mx + b, m is slope, b is y-intercept; for x-intercept, set y = 0
- Convert between forms: Manipulate equations to change from standard to slope-intercept form
- From table to function: Verify constant rate of change, identify y-intercept
- Graph linear functions: Plot y-intercept, use slope to find another point, draw line
- Solve real-world problems: Identify initial value and rate of change, create model
• Slope-intercept form: \(y = mx + b\)
• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
• Point-slope form: \(y - y_1 = m(x - x_1)\)
• Standard form: \(Ax + By = C\)
• Function notation: \(f(x) = mx + b\)
What is a Linear Function? A linear function is a mathematical relationship between two variables (typically x and y) where the highest exponent of the variable is 1. Its graph is always a straight line. The most common form is \(y = mx + b\), where m is the slope and b is the y-intercept.
Key Components:
- Slope (m): Measures the steepness and direction of the line. Calculated as "rise over run" or \(\frac{\text{change in y}}{\text{change in x}}\). A positive slope rises from left to right; a negative slope falls.
- Y-intercept (b): The point where the line crosses the y-axis (when x = 0). Represents the initial value or starting point.
- X-intercept: The point where the line crosses the x-axis (when y = 0). Found by setting y = 0 and solving for x.
Identifying Linear Functions:
- Equation has variables with exponent 1 only
- No variables under radicals or in denominators
- Can be written in form y = mx + b or Ax + By = C
Graphing Linear Functions:
- Plot the y-intercept (0, b)
- Use the slope to find another point (from y-intercept, move right by denominator of slope, up/down by numerator)
- Draw a straight line through both points
Finding Intercepts:
- Y-intercept: Look for b in y = mx + b, or substitute x = 0
- X-intercept: Set y = 0 and solve for x
Simple: y = 2x + 1 (slope = 2, y-intercept = 1)
Intermediate: 3x + 4y = 12 → y = -3x/4 + 3 (slope = -3/4, y-intercept = 3)
Advanced: Word problem → Cost function C(x) = 5x + 20 (slope = 5, y-intercept = 20)
• Forgetting to change signs when moving terms across the equals sign
• Using the wrong order in the slope formula (y₂-y₁)/(x₂-x₁)
• Confusing slope and y-intercept values
• Not simplifying fractions when expressing slope
Questions & Answers
Question: I don't understand why the slope is called the "rate of change." Can you explain what this means in real life?
Answer: Great question! The slope being called "rate of change" is fundamental to understanding linear functions:
- The slope tells us how much the dependent variable (y) changes for every 1-unit increase in the independent variable (x).
- For example, if the slope is 3, then for every 1 unit x increases, y increases by 3 units.
- In real-life scenarios, this translates to various rates: speed (distance/time), cost (price/quantity), growth (amount/time), etc.
In the taxi example from the exercises (C(m) = 2m + 3), the slope of 2 means that for every additional mile traveled, the cost increases by $2. This is literally the "rate of change" of cost with respect to distance.
The slope captures how fast or slow the dependent variable changes in response to changes in the independent variable.
Question: How can I easily convert from standard form (Ax + By = C) to slope-intercept form (y = mx + b)?
Answer: Converting from standard form to slope-intercept form is a matter of solving for y:
- Start with: Ax + By = C
- Subtract Ax from both sides: By = -Ax + C
- Divide everything by B: y = (-A/B)x + C/B
- Identify m and b: m = -A/B and b = C/B
Example: Convert 3x + 2y = 6 to slope-intercept form:
- 2y = -3x + 6 (subtract 3x from both sides)
- y = (-3/2)x + 3 (divide everything by 2)
- So m = -3/2 and b = 3
Remember to perform the same operation to both sides of the equation, and be careful with signs when moving terms.
Question: Why do we call it a "function" instead of just an equation? What's the difference?
Answer: While all linear functions can be represented by linear equations, there's an important distinction:
- Equation: A statement that two expressions are equal (e.g., 2x + 3y = 6)
- Function: A special type of relation where each input (x-value) corresponds to exactly one output (y-value)
All linear functions are equations, but we specifically call them functions when we emphasize the input-output relationship. For example, y = 2x + 1 is a linear function because for every x you input, you get exactly one y-value output.
We can also write functions in function notation like f(x) = 2x + 1, which emphasizes that f is a function that takes an input x and produces an output.
Linear equations like x = 3 (vertical line) are not functions because one x-value corresponds to infinitely many y-values, violating the function definition.