Solved Exercises on Volume Calculations in Grade 8

Master volume calculations: cubes, rectangular prisms, and cylinders through these 3 detailed exercises with comprehensive explanations.

Solution: Exercises 1 to 3
1 Cube volume
Exercise 1
Calculate the volume of a cube with side length 5 cm.
Definition:

Volume: The amount of space occupied by a 3D figure

Cube: A 3D figure with 6 equal square faces and equal dimensions

Method:
  1. Identify that a cube has equal length, width, and height
  2. Apply the formula: Volume = length × width × height
  3. Since all sides are equal: Volume = side³
Given
Side = 5 cm
Formula
V = s³
Result
125 cm³
Step 1: Understand cube properties

A cube has equal length, width, and height. All three dimensions are the same: 5 cm each.

Step 2: Apply the formula

Volume = length × width × height = 5 × 5 × 5

Step 3: Calculate

5 × 5 × 5 = 125 cm³

Volume = 125 cm³
Final answer:

The volume of the cube is 125 cm³

Applied rules:

• Volume formula: V = l × w × h for rectangular solids

• Cube simplification: V = s³ when l = w = h = s

• Cubing: Multiplying a number by itself three times

Tip: Remember that volume units are always cubed (cm³, m³, etc.)
Common mistake: Don't confuse volume with surface area!
2 Rectangular prism volume
Exercise 2
Find the volume of a rectangular prism with dimensions: length = 7 cm, width = 4 cm, height = 6 cm.
Definition:

Rectangular prism: A 3D figure with 6 rectangular faces

Volume: The space inside the figure measured in cubic units

Given
l=7, w=4, h=6
Formula
V = lwh
Result
168 cm³
Step 1: Identify dimensions

Length (l) = 7 cm, Width (w) = 4 cm, Height (h) = 6 cm

Step 2: Apply the formula

Volume = length × width × height = 7 × 4 × 6

Step 3: Calculate step by step

7 × 4 = 28, then 28 × 6 = 168 cm³

Volume = 168 cm³
Final answer:

The volume of the rectangular prism is 168 cm³

Applied rules:

• Volume formula: V = l × w × h

• Order of operations: Multiply in any order

• Units: Cubic units (cm³) for 3D measurements

Tip: Volume tells us how many unit cubes fit inside the shape.
Common mistake: Always check that all dimensions use the same unit!
3 Cylinder volume
Exercise 3
Calculate the volume of a cylinder with radius 3 cm and height 8 cm. (Use π ≈ 3.14)
Definition:

Cylinder: A 3D figure with 2 parallel circular bases connected by a curved surface

Volume: Area of base × height

Given
r=3, h=8
Formula
V = πr²h
Result
226.08 cm³
Step 1: Identify components

Cylinder volume = Base area × height = πr² × h

Step 2: Apply the formula

V = πr²h = 3.14 × (3)² × 8

Step 3: Calculate base area

πr² = 3.14 × (3)² = 3.14 × 9 = 28.26 cm²

Step 4: Multiply by height

V = 28.26 × 8 = 226.08 cm³

Volume = 226.08 cm³
Final answer:

The volume of the cylinder is 226.08 cm³

Applied rules:

• Volume formula: V = πr²h

• Base area: A = πr² for circular base

• General principle: Volume = Base area × Height

Tip: Think of a stack of coins - each coin is the base area stacked to the height.
Common mistake: Don't forget to square the radius, not just multiply by 2!

Comprehensive Summary: Volume Calculations

Definitions & Key Concepts

  • Volume: The amount of space inside a 3D figure, measured in cubic units (cm³, m³, etc.)
  • 3D Figure: An object with length, width, and height (three dimensions)
  • Cubic Unit: A cube with sides of 1 unit length, used to measure volume
  • Base Area: The area of the bottom face of a 3D figure

Core Rules & Principles

  • General Formula: Volume = Base Area × Height
  • Unit Cubes: Volume represents how many unit cubes fit inside the figure
  • Consistent Units: All dimensions must be in the same unit before calculating
  • Cubic Units: Volume is always expressed in cubic units (³)

Step-by-Step Methods

  1. Identify the shape and its dimensions
  2. Select the appropriate formula for that shape
  3. Verify all dimensions are in the same unit
  4. Substitute values into the formula
  5. Perform calculations carefully, following order of operations
  6. Express answer with correct cubic units

Formulas by Shape

  • Cube: V = s³ (where s = side length)
  • Rectangular Prism: V = l × w × h (length × width × height)
  • Cylinder: V = πr²h (π × radius² × height)
  • Triangular Prism: V = ½bh × H (base area × height)

Examples - Simple to Advanced

  • Simple: Cube with side 2 cm → V = 2³ = 8 cm³
  • Intermediate: Rectangular prism 3×4×5 → V = 3×4×5 = 60 cm³
  • Advanced: Cylinder r=2, h=10 → V = π×2²×10 = 40π ≈ 125.6 cm³

Tips & Tricks

  • Visualization: Imagine filling the shape with small cubes to understand volume
  • Memory Aid: "Length times width times height" for rectangular shapes
  • Check Work: Verify your answer makes sense based on the dimensions
  • Unit Awareness: Always include and check cubic units in your answer

Common Pitfalls

  • Mixing Units: Using cm for one dimension and m for another
  • Linear vs Cubic: Forgetting to cube the radius in cylinder formulas
  • Surface Area Confusion: Using surface area formulas instead of volume
  • Arithmetic Errors: Careless multiplication with decimals

Key Takeaways for Memorization

  • Volume = Base Area × Height (universal concept)
  • Cubes: V = s³ (simplest case)
  • Prisms: V = Base Area × Height
  • Cylinders: V = πr²h (circle base × height)
  • Always check units and make sure they're consistent
Volume Formulas & Shapes
📦

Cube

V = s³
Equal length, width, height
▭

Rectangular Prism

V = lwh
Length × Width × Height
🛢️

Cylinder

V = πr²h
Circular base × height

Key Points to Remember

✓
Volume measures the space inside a 3D shape
✓
Units for volume are always cubed (cm³, m³, etc.)
✓
Formula depends on the shape of the 3D figure
✓
Consistency in units is crucial for accuracy
V = \text{Base Area} \times \text{Height}
Universal Principle
Detailed Methods & Techniques
Step-by-Step Process:
  1. Identify the 3D shape and its key dimensions
  2. Select the appropriate formula for that shape
  3. Ensure all dimensions are in the same unit
  4. Substitute values into the formula
  5. Perform calculations carefully
  6. Express answer with correct cubic units
Important Definitions:

Volume: The amount of space occupied by a 3D figure

Cubic Unit: A unit of measurement for 3D space

Base Area: The area of the bottom face of a 3D figure

Essential Formulas:

• Cube: V = s³

• Rectangular Prism: V = lwh

• Cylinder: V = πr²h

• Triangular Prism: V = ½bhl

Tip 1: Think of volume as how much water the shape could hold.
Tip 2: Always write down the formula before substituting.
Tip 3: Check your answer makes sense compared to the dimensions.
Tip 4: Remember: volume ≠ surface area (different formulas!).
Complete Guide to Volume Calculations
V = \text{Base Area} \times \text{Height}
Universal Approach
Core Concepts:

Volume: The measure of the space inside a 3D object

3D Figures: Objects with length, width, and height

Cubic Units: Units for measuring 3D space (cm³, m³, etc.)

Complete Methodology:
  1. Analyze the shape: Identify the type of 3D figure
  2. Select the formula: Based on the specific 3D figure
  3. Identify dimensions: Label all required measurements
  4. Check units: Ensure all dimensions use the same unit
  5. Substitute values: Into the appropriate formula
  6. Calculate: Following order of operations
  7. Verify: Check units and reasonableness of answer
Tip 1: Practice visualizing 3D shapes from 2D representations.
Tip 2: Remember that volume units are always cubed.
Tip 3: Use the "filling with unit cubes" concept to understand volume.
Tip 4: Always include units in your final answer.
Common errors: Confusing volume with surface area, inconsistent units, calculation mistakes.
Exam preparation: Memorize formulas, practice with various shapes, check units carefully.
Formulas to know by heart:

• Cube: V = s³

• Rectangular Prism: V = lwh

• Cylinder: V = πr²h

• General: V = Base Area × Height

Questions & Answers

Question: I don't understand why the volume of a cylinder is πr²h instead of πr²h². Why don't we cube the height like we do with the radius?

Answer: Great question! The difference comes from what we're calculating:

  • Radius (r) appears in the formula because we need the area of the circular base: A = πr²
  • Height (h) appears once because we're extending that base area upward by the height

Think of it this way: volume = base area × height. The base area is πr² (which involves squaring the radius), and we multiply that by the height once.

If we had πr²h², we'd be saying the height contributes twice to the volume, which doesn't make physical sense. We only go up by the height once.

Compare this to a cube where all dimensions are equal: V = s × s × s = s³. Here, length, width, and height are all the same (s), so we cube it. In a cylinder, only the radius appears in two dimensions (the circular base), while height appears once.

Question: When calculating the volume of a rectangular prism, does the order of length, width, and height matter? Could I use width × height × length instead?

Answer: No, the order does not matter! This is due to the commutative property of multiplication:

  • l × w × h = w × h × l = h × l × w (and all other arrangements)
  • Multiplication is commutative: a × b × c = b × c × a = c × a × b

For example, if your dimensions are 4 cm, 5 cm, and 6 cm:

  • 4 × 5 × 6 = 120 cm³
  • 5 × 6 × 4 = 120 cm³
  • 6 × 4 × 5 = 120 cm³

However, it's important to be consistent with your labeling so you don't accidentally mix up dimensions. The key is that you multiply all three dimensions together, regardless of the order.

What matters is that you include all three different measurements and multiply them together.

Question: How can I remember all these different volume formulas? They seem so different from each other!

Answer: There's actually a unifying concept that connects all volume formulas:

  • Volume = Base Area × Height (this works for ALL prisms and cylinders!)
  • Cube: Base area = s², height = s → V = s² × s = s³
  • Rectangular prism: Base area = l × w, height = h → V = (l × w) × h
  • Cylinder: Base area = πr², height = h → V = πr² × h

Instead of memorizing separate formulas, remember this pattern: find the area of the base, then multiply by the height.

For pyramids and cones, it's slightly different: V = ⅓ × Base Area × Height

This conceptual approach helps you understand why the formulas work, making them easier to remember and apply correctly.