Solution: Exercises 1 to 3
1 Percent to Fraction Conversion
Exercise 1
Convert 65% to a fraction in simplest form. Then convert that fraction to a decimal.
Definition:
Percent: A ratio comparing a number to 100. Simplest form: A fraction where the numerator and denominator have no common factors other than 1.
Conversion method:
- Write the percent as a fraction with denominator 100
- Find the greatest common factor (GCF) of numerator and denominator
- Divide both numerator and denominator by the GCF
- Convert to decimal by dividing numerator by denominator
Step 1: Write percent as fraction
65% = 65/100 (percent means "per hundred")
Step 2: Find the GCF of 65 and 100
Factors of 65: 1, 5, 13, 65
Factors of 100: 1, 2, 4, 5, 10, 20, 25, 50, 100
Common factors: 1, 5
GCF = 5
Step 3: Divide both by GCF
65 ÷ 5 = 13
100 ÷ 5 = 20
So 65/100 = 13/20
65% = 13/20
Step 4: Convert fraction to decimal
13/20 = 13 ÷ 20 = 0.65
Final answer:
65% = 13/20 in simplest form. As a decimal, this is 0.65.
Applied rules:
• Percent to fraction: Place the percent number over 100
• Simplification: Divide both numerator and denominator by their GCF
• Fraction to decimal: Divide numerator by denominator
Tip 1: Always simplify fractions to their lowest terms.
Tip 2: The decimal will always have the same digits as the percent, just moved two places left.
2 Fraction to Decimal Conversion
Exercise 2
Convert 7/8 to a decimal. Then convert that decimal to a percent.
Definition:
Terminating decimal: A decimal that ends after a finite number of digits. Repeating decimal: A decimal that has a repeating pattern of digits.
Step 1: Set up long division
7 ÷ 8 (since 7 < 8, add decimal point and zeros)
Step 2: Perform long division
7.000 ÷ 8 = 0.875
8 goes into 70 eight times (8 × 8 = 64), remainder 6
8 goes into 60 seven times (7 × 8 = 56), remainder 4
8 goes into 40 five times (5 × 8 = 40), remainder 0
Step 3: Convert decimal to percent
0.875 × 100% = 87.5%
Step 4: Verify the conversion
87.5% = 87.5/100 = 875/1000 = 7/8 ✓
7/8 = 0.875 = 87.5%
Final answer:
7/8 = 0.875 as a decimal. As a percent, this is 87.5%.
Applied rules:
• Fraction to decimal: Divide numerator by denominator
• Decimal to percent: Multiply by 100 (move decimal point two places right)
• Verification: Convert back to check accuracy
Tip 1: Add zeros to the dividend when doing long division to continue past the decimal point.
Tip 2: To convert decimal to percent, move the decimal point two places to the right.
3 Decimal to Percent Conversion
Exercise 3
Convert 0.36 to a percent. Then convert that percent to a fraction in simplest form.
Definition:
Decimal to percent: Multiply by 100 and add the percent symbol. Decimal places: The number of digits after the decimal point.
Convert to fraction
36/100
Step 1: Convert decimal to percent
0.36 × 100% = 36%
(Move decimal point two places right)
Step 2: Convert percent to fraction
36% = 36/100
Step 3: Find the GCF of 36 and 100
Factors of 36: 1, 2, 3, 4, 6, 9, 12, 18, 36
Factors of 100: 1, 2, 4, 5, 10, 20, 25, 50, 100
Common factors: 1, 2, 4
GCF = 4
Step 4: Simplify the fraction
36 ÷ 4 = 9
100 ÷ 4 = 25
So 36/100 = 9/25
Step 5: Verify the conversion
9/25 = 9 ÷ 25 = 0.36 ✓
0.36 = 36% = 9/25
Final answer:
0.36 = 36% as a percent. As a fraction in simplest form, this is 9/25.
Applied rules:
• Decimal to percent: Multiply by 100 (move decimal point two places right)
• Percent to fraction: Place the percent number over 100
• Simplification: Divide both numerator and denominator by their GCF
Tip 1: When converting decimal to percent, moving the decimal point two places right is the same as multiplying by 100.
Tip 2: The number of decimal places in the original decimal tells you the denominator when converting to a fraction (2 places = 100).
Key Concepts: Converting Between Percents, Fractions, and Decimals
Key definitions:
Percent: A ratio comparing a number to 100 (per hundred)
Fraction: A number representing a part of a whole (a/b)
Decimal: A number based on the base-10 system with a decimal point
Simplest form: A fraction reduced so the numerator and denominator have no common factors
Greatest Common Factor (GCF): The largest number that divides two or more numbers evenly
Conversion methods:
- Percent to fraction: Write over 100, then simplify
- Fraction to decimal: Divide numerator by denominator
- Decimal to percent: Multiply by 100 (move decimal two places right)
- Percent to decimal: Divide by 100 (move decimal two places left)
- Decimal to fraction: Write as fraction over power of 10, then simplify
Common equivalences: 50% = 1/2 = 0.5, 25% = 1/4 = 0.25, 75% = 3/4 = 0.75
Decimal movement: ×100 moves decimal right 2 places, ÷100 moves decimal left 2 places
Place value: The number of decimal places determines the denominator (1 place = 10, 2 places = 100)
Tip 1: Remember that "percent" means "per hundred" - this helps with conversions.
Tip 2: Always verify your conversions by going back to the original form.
Solution: Exercises 4 to 5
4 Mixed Number Conversion
Exercise 4
Convert 3¾ to a decimal and then to a percent. Show all steps in the conversion process.
Definition:
Mixed number: A number consisting of a whole number and a fraction. Improper fraction: A fraction where the numerator is greater than or equal to the denominator.
Step 1: Convert mixed number to improper fraction
3¾ = (3 × 4 + 3)/4 = (12 + 3)/4 = 15/4
Step 2: Convert improper fraction to decimal
15 ÷ 4 = 3.75
4 goes into 15 three times (4 × 3 = 12), remainder 3
4 goes into 30 seven times (7 × 4 = 28), remainder 2
4 goes into 20 five times (5 × 4 = 20), remainder 0
Step 3: Convert decimal to percent
3.75 × 100% = 375%
Step 4: Verify the conversion
375% = 375/100 = 3.75 = 15/4 = 3¾ ✓
3¾ = 3.75 = 375%
Final answer:
3¾ = 3.75 as a decimal. As a percent, this is 375%.
Applied rules:
• Mixed to improper: (Whole × Denominator + Numerator) ÷ Denominator
• Decimal to percent: Multiply by 100 (move decimal point two places right)
• Verification: Convert back to check accuracy
Tip 1: When converting mixed numbers, always convert to improper fractions first.
Tip 2: Percents greater than 100% are normal when dealing with mixed numbers greater than 1.
5 Repeating Decimal Conversion
Exercise 5
Convert 0.6̄ (0.666...) to a fraction. Then convert that fraction to a percent.
Definition:
Repeating decimal: A decimal with a digit or group of digits that repeats infinitely. Bar notation: A bar over digits indicates repetition.
Let x = 0.6̄
x = 0.666...
Step 1: Set up the equation
Let x = 0.666...
Step 2: Multiply by 10 to shift the decimal
10x = 6.666...
Step 3: Subtract the original equation
10x = 6.666...
− (x = 0.666...)
9x = 6
Step 4: Solve for x
x = 6/9 = 2/3
Step 5: Convert fraction to percent
2/3 = (2 ÷ 3) × 100% = 0.666... × 100% = 66⅔%
Step 6: Verify the conversion
66⅔% = 66⅔ ÷ 100 = (200/3) ÷ 100 = 200/300 = 2/3 ✓
0.6̄ = 2/3 = 66⅔%
Final answer:
0.6̄ = 2/3 as a fraction. As a percent, this is 66⅔%.
Applied rules:
• Repeating decimal to fraction: Use algebra with multiplication and subtraction
• Fraction to percent: Divide numerator by denominator, then multiply by 100%
• Mixed number percents: Keep as mixed number or convert to decimal
Tip 1: For repeating decimals, multiply by 10 for 1 repeating digit, 100 for 2, etc.
Tip 2: Repeating decimals often convert to fractions with 9, 99, 999, etc. as denominators.
Comprehensive Guide to Converting Between Percents, Fractions, and Decimals
Key definitions:
Percent: A ratio comparing a number to 100 (represented by the symbol %)
Fraction: A number representing a part of a whole, written as a/b
Decimal: A number based on the base-10 system using a decimal point
Terminating decimal: A decimal that ends after a finite number of digits
Repeating decimal: A decimal with a digit or group of digits that repeats infinitely
Complete methodology:
- Identify the conversion needed: Determine the starting and ending forms
- Apply the correct method: Use the appropriate algorithm for the conversion
- Perform calculations: Carry out the mathematical operations accurately
- Simplify if needed: Reduce fractions to simplest form
- Verify the result: Check by converting back to the original form
Tip 1: Remember that all three forms represent the same value, just in different formats.
Tip 2: When converting, keep track of decimal places and place values carefully.
Tip 3: Always simplify fractions to their lowest terms unless otherwise specified.
Tip 4: Estimation helps verify that your answer is reasonable.
Common errors: Forgetting to simplify fractions, misplacing decimal points, confusing which direction to move the decimal point, not accounting for repeating decimals properly.
Exam preparation: Practice all six conversion directions, memorize common equivalences, work with mixed numbers and repeating decimals, and solve real-world problems.
Essential conversion rules:
• Percent to decimal: Divide by 100 (move decimal point two places left)
• Decimal to percent: Multiply by 100 (move decimal point two places right)
• Percent to fraction: Write over 100, then simplify
• Fraction to decimal: Divide numerator by denominator
• Decimal to fraction: Write over appropriate power of 10, then simplify
• Mixed number to improper: (Whole × Denominator + Numerator) ÷ Denominator
Detailed Summary: Converting Between Percents, Fractions, and Decimals
Key Definitions
Percent: A ratio comparing a number to 100, denoted by the % symbol. The word "percent" literally means "per hundred" (from Latin "per centum"). For example, 50% means 50 per 100 or 50/100.
Fraction: A number representing a part of a whole, written in the form a/b where a is the numerator and b is the denominator. The denominator cannot be zero.
Decimal: A number based on the base-10 system that uses a decimal point to separate the whole number part from the fractional part. For example, 0.75 represents 75 hundredths.
Simplest form: A fraction is in simplest form when the numerator and denominator have no common factors other than 1. For example, 15/20 reduces to 3/4.
Terminating decimal: A decimal that ends after a finite number of digits. For example, 0.5 and 0.75 are terminating decimals.
Repeating decimal: A decimal with a digit or group of digits that repeats infinitely. For example, 0.333... (or 0.3̄) and 0.142857142857... (or 0.142857̄).
Core Rules and Principles
Percent to decimal rule: Divide by 100 (move decimal point two places to the left). For example, 75% = 75 ÷ 100 = 0.75.
Decimal to percent rule: Multiply by 100 (move decimal point two places to the right). For example, 0.45 = 0.45 × 100% = 45%.
Percent to fraction rule: Write the percent number over 100, then simplify. For example, 60% = 60/100 = 3/5.
Fraction to decimal rule: Divide the numerator by the denominator. For example, 3/4 = 3 ÷ 4 = 0.75.
Decimal to fraction rule: Write the decimal digits over the appropriate power of 10 (based on decimal places), then simplify. For example, 0.25 = 25/100 = 1/4.
Simplification principle: Always reduce fractions to their lowest terms by dividing both numerator and denominator by their greatest common factor (GCF).
Step-by-Step Methods
Percent to fraction conversion: 1) Write the percent as a fraction over 100, 2) Find the GCF of numerator and denominator, 3) Divide both by the GCF, 4) Verify by converting back.
Fraction to decimal conversion: 1) Set up long division with numerator divided by denominator, 2) Add decimal point and zeros as needed, 3) Continue dividing until remainder is 0 (terminating) or pattern repeats (repeating), 4) Round if necessary.
Decimal to percent conversion: 1) Move decimal point two places to the right, 2) Add the % symbol, 3) If needed, add zeros to maintain proper place value.
Repeating decimal to fraction: 1) Let x equal the repeating decimal, 2) Multiply by appropriate power of 10 to shift the decimal, 3) Subtract original equation from multiplied equation, 4) Solve for x, 5) Simplify the resulting fraction.
Examples and Applications
Simple example: Converting 40%: 40% = 40/100 = 2/5 = 0.4. All three represent the same value.
Intermediate example: Converting 0.125: 0.125 × 100% = 12.5%, and 0.125 = 125/1000 = 1/8.
Advanced example: Converting 2⅓ to decimal: 2⅓ = 7/3 = 7 ÷ 3 = 2.333... = 2.3̄, which as a percent is 233⅓%.
Real-world applications: Calculating discounts and sales tax, converting recipe measurements, interpreting statistical data, financial calculations, scientific measurements, and probability.
Tips and Common Pitfalls
Tips: Remember that "percent" means "per hundred." When converting decimals to percents, moving the decimal point two places right is the same as multiplying by 100. Always check your work by converting back to the original form. Memorize common equivalences like 25% = 1/4 = 0.25.
Common mistakes: Forgetting to move the decimal point the correct number of places, not simplifying fractions to lowest terms, misplacing the decimal point when converting, confusing which direction to move the decimal point.
Pitfalls to avoid: Performing calculations carelessly, not accounting for all decimal places, forgetting to include the % symbol when needed, and not recognizing when a decimal terminates versus repeats.
Key Notes for Memorization
Memory aids: "Move left for percent to decimal" (think: "left is less" - smaller number). "Move right for decimal to percent" (think: "right is more" - larger number). "Percent means per hundred" - always start with denominator of 100.
Quick reference: 10% = 1/10 = 0.1, 20% = 1/5 = 0.2, 25% = 1/4 = 0.25, 33⅓% = 1/3 = 0.3̄, 50% = 1/2 = 0.5, 66⅔% = 2/3 = 0.6̄, 75% = 3/4 = 0.75, 100% = 1 = 1.0.
Visual memory: Picture the decimal point moving two places when converting to/from percents. Think of a pie cut into 100 pieces for percents.
Verification strategy: Always convert back to the original form to check your answer. For example, if you converted 0.6 to 60%, convert 60% back to see if you get 0.6.
Questions & Answers
Question: I always get confused about which direction to move the decimal point when converting between decimals and percents. How can I remember this?
Answer: Here are some helpful memory aids:
- Decimals to percents: "To make it bigger (decimal to percent), move right" - multiply by 100, so move decimal 2 places right
- Percents to decimals: "To make it smaller (percent to decimal), move left" - divide by 100, so move decimal 2 places left
- Think about size: 0.25 is smaller than 25%, so when going from 0.25 to 25%, you move right to make the number appear larger
Example: 0.45 → 45% (move decimal 2 places right)
45% → 0.45 (move decimal 2 places left)
Remember: multiplying by 100 moves the decimal right, dividing by 100 moves it left!
Question: How do I convert a repeating decimal like 0.3̄ to a fraction? It seems impossible since it goes on forever.
Answer: It's actually quite systematic! Here's the algebraic method:
- Step 1: Let x = the repeating decimal (x = 0.333...)
- Step 2: Multiply both sides by 10 for 1 repeating digit (10x = 3.333...)
- Step 3: Subtract the original equation from the new one: 10x - x = 3.333... - 0.333...
- Step 4: This gives 9x = 3, so x = 3/9 = 1/3
For two repeating digits (like 0.12̄), multiply by 100. For three repeating digits, multiply by 1000, etc.
The repeating pattern cancels out when you subtract, leaving a solvable equation!
Question: What if I have a mixed number like 2⅕? How do I convert that to a decimal and percent?
Answer: The key is to convert the mixed number to an improper fraction first:
- Step 1: Convert mixed to improper: 2⅕ = (2×5 + 1)/5 = 11/5
- Step 2: Convert fraction to decimal: 11 ÷ 5 = 2.2
- Step 3: Convert decimal to percent: 2.2 × 100% = 220%
Alternatively, you can convert just the fractional part: ⅕ = 0.2, so 2⅕ = 2 + 0.2 = 2.2 = 220%
Note that percents greater than 100% are perfectly normal when working with mixed numbers greater than 1.
Always remember to convert mixed numbers to improper fractions first when doing complex operations!