Scaling Effect: When dimensions are changed by a factor, volume changes by the cube of that factor and surface area changes by the square of that factor.
- Calculate original volume and surface area
- Determine the scale factor
- Apply the scaling rules: Volume scales by (scale factor)³, Surface area scales by (scale factor)²
- Calculate new values
- Compare the changes
Original volume = s³ = 3³ = 27 cm³
Original surface area = 6s² = 6 × 3² = 6 × 9 = 54 cm²
Each side is doubled, so scale factor = 2
New volume = Original volume × (scale factor)³ = 27 × 2³ = 27 × 8 = 216 cm³
New surface area = Original SA × (scale factor)² = 54 × 2² = 54 × 4 = 216 cm²
New side length = 3 × 2 = 6 cm
Volume = 6³ = 216 cm³ ✓
Surface area = 6 × 6² = 6 × 36 = 216 cm² ✓
Volume increased by a factor of 8 (2³)
Surface area increased by a factor of 4 (2²)
When the side length is doubled, the volume increases by a factor of 8 and the surface area increases by a factor of 4.
• Volume Scaling: Volume changes by (scale factor)³
• Surface Area Scaling: Surface area changes by (scale factor)²
• Dimensional Analysis: Linear dimensions affect volume cubically and surface area quadratically
what is the effect on the volume and surface area?
Independent Changes: When different dimensions change by different factors, calculate the combined effect by considering each dimension's contribution separately.
Original volume = πr²h = π × 4² × 6 = π × 16 × 6 = 96π cm³
Original surface area = 2πr² + 2πrh = 2π × 16 + 2π × 4 × 6 = 32π + 48π = 80π cm²
Radius doubles: r → 2r (factor of 2)
Height halves: h → h/2 (factor of 1/2)
New volume = π(2r)²(h/2) = π × 4r² × h/2 = 2πr²h
Since original was πr²h, new volume = 2 × original = 2 × 96π = 192π cm³
New surface area = 2π(2r)² + 2π(2r)(h/2) = 2π × 4r² + 2π × 2r × h/2
= 8πr² + 2πrh
= 8π × 16 + 2π × 4 × 3 = 128π + 24π = 152π cm²
Volume increases by a factor of 2
Surface area increases from 80π to 152π, a factor of 152/80 = 1.9
When the radius is doubled and height is halved, the volume increases by a factor of 2 and the surface area increases by a factor of 1.9.
• Volume Formula: V = πr²h (radius affects volume quadratically)
• Surface Area Formula: SA = 2πr² + 2πrh (radius affects both terms)
• Independent Changes: Different dimensions can change by different factors
in volume and surface area.
Percentage Increase: When a dimension changes by a percentage, the effect on volume and surface area follows the power rule for that dimension.
Original volume = (4/3)πr³ = (4/3)π × 5³ = (4/3)π × 125 = (500π/3) cm³
Original surface area = 4πr² = 4π × 5² = 4π × 25 = 100π cm²
New radius = 5 + (20% of 5) = 5 + (0.20 × 5) = 5 + 1 = 6 cm
New volume = (4/3)π × 6³ = (4/3)π × 216 = 288π cm³
New surface area = 4π × 6² = 4π × 36 = 144π cm²
Volume increase factor = 288π ÷ (500π/3) = 288 × 3/500 = 864/500 = 1.728
Percentage increase in volume = (1.728 - 1) × 100% = 72.8%
Surface area increase factor = 144π ÷ 100π = 1.44
Percentage increase in surface area = (1.44 - 1) × 100% = 44%
Scale factor = 1.2 (since radius increased by 20%)
Volume should scale by 1.2³ = 1.728 ✓
Surface area should scale by 1.2² = 1.44 ✓
When the radius increases by 20%, the volume increases by 72.8% and the surface area increases by 44%.
• Sphere Volume: V = (4/3)πr³ (changes by scale factor cubed)
• Sphere Surface Area: SA = 4πr² (changes by scale factor squared)
• Percentage Calculation: New value ÷ Original value gives scale factor
Scale Factor: The ratio of new dimension to original dimension
Linear Dimension: A one-dimensional measurement (length, width, height, radius)
Volume: Three-dimensional space measured in cubic units
Surface Area: Two-dimensional area of the outer surface measured in square units
- Identify original dimensions: Record all relevant measurements
- Determine changes: Calculate new dimensions after changes
- Apply formulas: Use appropriate volume and surface area formulas
- Calculate effects: Determine how values change with new dimensions
- Compare results: Calculate factors or percentages of change