Dilation: A transformation that changes the size of a figure by multiplying the coordinates by a scale factor. The shape remains the same, but the size changes. Distances from the center of dilation are multiplied by the scale factor.
- Identify the center of dilation (origin in this case)
- Identify the scale factor
- Apply the dilation rule: (x, y) → (kx, ky) where k is the scale factor
- Multiply each coordinate by the scale factor
Center of dilation: Origin (0, 0)
Scale factor: k = 2
For dilation centered at origin: (x, y) → (kx, ky)
A(2, 3) → A'(2×2, 3×2) = A'(4, 6)
B(4, 1) → B'(4×2, 1×2) = B'(8, 2)
C(1, -1) → C'(1×2, -1×2) = C'(2, -2)
The new coordinates after dilation are: A'(4, 6), B'(8, 2), C'(2, -2)
• Dilation Rule (Origin): (x, y) → (kx, ky)
• Similarity: The new triangle is similar to the original
• Scale Factor: Multiplies all distances from center by k
Scale Factor: The ratio of the lengths of corresponding sides in the image to the pre-image. It determines how much larger or smaller the dilated figure is compared to the original.
Original point P(1, 2) maps to P'(3, 6)
k = x'-coordinate ÷ x-coordinate = 3 ÷ 1 = 3
k = y'-coordinate ÷ y-coordinate = 6 ÷ 2 = 3
Q(3, 2) → Q'(9, 6): 9÷3 = 3, 6÷2 = 3 ✓
S(1, 4) → S'(3, 12): 3÷1 = 3, 12÷4 = 3 ✓
The scale factor of the dilation is 3
• Scale Factor Formula: k = image coordinate ÷ original coordinate
• Consistency: Scale factor must be the same for all points
• Verification: Check with multiple points to confirm
Dilation with Center Not at Origin: To dilate a point with center at (h, k) and scale factor k: (x, y) → (h + k(x-h), k + k(y-k)). The point is translated relative to the center, scaled, then translated back.
For center (h, k) and scale factor k: (x, y) → (h + k(x-h), k + k(y-k))
X(5, 3) with center C(2, 1) and scale factor 0.5
x' = h + k(x-h) = 2 + 0.5(5-2) = 2 + 0.5(3) = 2 + 1.5 = 3.5
y' = k + k(y-k) = 1 + 0.5(3-1) = 1 + 0.5(2) = 1 + 1 = 2
X'(3.5, 2)
Distance from C to X: √[(5-2)² + (3-1)²] = √[9 + 4] = √13
Distance from C to X': √[(3.5-2)² + (2-1)²] = √[2.25 + 1] = √3.25 = 0.5√13 ✓
The coordinates of the image point are X'(3.5, 2)
• Dilation Formula (General): (x, y) → (h + k(x-h), k + k(y-k))
• Distance Preservation: Distance from center multiplied by scale factor
• Similarity: Shape preserved, size changed proportionally
Dilation: A transformation that enlarges or reduces a figure by multiplying coordinates by a scale factor
Scale Factor: The ratio that determines how much larger or smaller the image is compared to the pre-image
Similar Figures: Figures with the same shape but not necessarily the same size
Center of Dilation: The fixed point from which distances are measured and multiplied
- Identify the center of dilation: Determine the fixed point
- Find the scale factor: Determine the multiplication factor
- Apply the appropriate rule: Use the correct dilation formula
- Verify the result: Check that distances and proportions are correct
• Dilation (Origin): (x, y) → (kx, ky)
• Dilation (General): (x, y) → (h + k(x-h), k + k(y-k))
• Scale Factor: k = image length ÷ original length
• Area Relationship: Area of image = k² × area of original
Concepts: Dilations are transformations that change the size of a figure while maintaining its shape. The scale factor determines the proportional change in size, and the center of dilation serves as the reference point for all distance measurements.
Applications: Dilations are used in maps, blueprints, photography, and computer graphics to create scaled versions of objects.
- Dilations preserve angle measures
- Dilations preserve parallelism
- Distances from the center are multiplied by the scale factor
- The original figure and its image are similar
- Identify the center of dilation
- Determine the scale factor
- Apply the appropriate dilation rule
- Calculate new coordinates for each point
- Connect the points to form the dilated figure
- Verify the dilation by checking proportions
• Sign Errors: Be careful with negative coordinates when multiplying
• Center Confusion: Remember the center stays fixed during dilation
• Scale Factor Misinterpretation: Values between 0 and 1 reduce size, not enlarge it
• Verification: Always check that corresponding sides are proportional
• Origin Dilation: "Multiply both coordinates by the scale factor"
• General Dilation: "Translate to origin, scale, then translate back"
• Scale Factor: "How many times bigger/smaller is the image?"
Composite Transformations: Combining dilations with other transformations
Similarity Ratios: Using dilations to establish similarity between figures
Fractals: Self-similar patterns created through repeated dilations
- Proportional Reasoning: Use ratios to solve complex similarity problems
- Coordinate Geometry: Apply algebraic methods to geometric transformations
- Verification Techniques: Check results using multiple methods
- Real-world Modeling: Apply dilations to practical situations
• Area Scaling: A' = k²A (area of image = k² × area of original)
• Perimeter Scaling: P' = kP (perimeter of image = k × perimeter of original)
• Volume Scaling: V' = k³V (for 3D figures)
• Composite Transformations: T₂(T₁(P)) - apply transformations sequentially
Questions & Answers
Question: How can I tell if two figures are similar using dilations? What properties must match?
Answer: Two figures are similar if one can be mapped onto the other through a dilation (possibly combined with rigid transformations). For figures to be similar:
- Corresponding angles must be equal
- Corresponding sides must be proportional (ratio is the scale factor)
- Shape must be identical (same number of sides, same angles)
To verify similarity, find the ratio of corresponding sides. If all ratios are equal, the figures are similar. The common ratio is the scale factor of the dilation that maps one figure to the other.
For example, if triangle ABC has sides 3, 4, 5 and triangle DEF has sides 6, 8, 10, the ratios are 6/3 = 2, 8/4 = 2, 10/5 = 2, so they're similar with scale factor 2.
Question: What happens when the scale factor is negative? How do I graph that?
Answer: When the scale factor is negative, the dilation includes a reflection across the center of dilation:
- Magnitude: The absolute value of the scale factor determines size change
- Direction: The negative sign reflects the image across the center
- Position: The image appears on the opposite side of the center
For example, a dilation with scale factor -2 centered at origin:
- Point (1, 1) becomes (-2, -2)
- The figure is enlarged by factor 2 and reflected across origin
The image is the same distance from center as the pre-image but in the opposite direction.
Question: How do I find the center of dilation if it's not given, just from the pre-image and image points?
Answer: To find the center of dilation:
- Draw lines: Connect corresponding points of pre-image and image
- Find intersection: The center is where these lines intersect
- Verify: Check that distances from center to points follow the scale factor
For example, if A(1,2) maps to A'(3,6) and B(2,1) maps to B'(6,3):
- Line from A to A': passes through origin (0,0)
- Line from B to B': passes through origin (0,0)
- Center is (0,0)
The center is the fixed point that remains unchanged during the dilation.