Congruence and Similarity from Transformations in Grade 8

Master congruence and similarity from transformations: rigid transformations preserve congruence, dilations create similarity through these 5 detailed exercises with comprehensive solutions.

Solution: Exercises 1 to 3
1 Congruence via Rigid Transformation
Exercise 1
Triangle ABC has vertices A(2,3), B(4,1), C(1,-1). Triangle DEF has vertices D(5,1), E(7,-1), F(4,-3). Show that the triangles are congruent and find the rigid transformation that maps ABC to DEF.
Definition:

Congruence: Two figures are congruent if one can be mapped to the other by a sequence of rigid transformations (translations, rotations, reflections). Congruent figures have the same size and shape.

Congruence method:
  1. Compare corresponding sides and angles
  2. Identify the rigid transformation mapping one to the other
  3. Verify that all corresponding parts are equal
  4. Confirm the transformation preserves distances and angles
Triangle ABC
A(2,3), B(4,1), C(1,-1)
Triangle DEF
D(5,1), E(7,-1), F(4,-3)
Translation
(x,y) → (x+3, y-2)
Step 1: Compare coordinates

A(2,3) → D(5,1): x increases by 3, y decreases by 2

B(4,1) → E(7,-1): x increases by 3, y decreases by 2

C(1,-1) → F(4,-3): x increases by 3, y decreases by 2

Step 2: Identify transformation

All points move 3 units right and 2 units down

This is a translation: (x,y) → (x+3, y-2)

Step 3: Verify congruence properties

Calculate side lengths of both triangles

AB = √[(4-2)² + (1-3)²] = √8

DE = √[(7-5)² + (-1-1)²] = √8 ✓

Triangles are congruent via translation
Final answer:

Triangles ABC and DEF are congruent because there exists a rigid transformation (translation) that maps ABC to DEF. The transformation rule is (x,y) → (x+3, y-2).

Applied rules:

• Congruence Definition: Figures related by rigid transformation are congruent

• Translation Rule: (x,y) → (x+h, y+k)

• Distance Preservation: Rigid transformations preserve distances

2 Congruence via Rotation
Exercise 2
Point P(3,4) is rotated 90° counterclockwise about the origin to P'(-4,3). Show that P and P' are related by a congruent transformation and verify the distance from origin is preserved.
Definition:

Rotation: A rigid transformation that turns a figure around a fixed point called the center of rotation. For 90° counterclockwise rotation about origin: (x,y) → (-y, x).

Original Point
P(3,4)
Rotation Rule
(x,y) → (-y, x)
New Coordinates
P'(-4, 3)
Step 1: Apply rotation formula

For 90° CCW rotation about origin: (x,y) → (-y, x)

P(3,4) → P'(-4, 3)

Step 2: Verify distance preservation

Distance from origin for P: √(3² + 4²) = √25 = 5

Distance from origin for P': √((-4)² + 3²) = √25 = 5 ✓

Step 3: Confirm congruence

Since rotation is a rigid transformation, P and P' are congruent

Only position changed, not size or shape

P and P' are congruent via rotation
Final answer:

Point P(3,4) and its image P'(-4,3) are related by a rigid transformation (rotation), so they are congruent. The distance from origin is preserved at 5 units.

Applied rules:

• Rotation Formula: 90°CCW: (x,y)→(-y,x)

• Distance Preservation: Rigid transformations preserve distances

• Congruence: Rigid transformations preserve size and shape

3 Congruence via Reflection
Exercise 3
Triangle XYZ with vertices X(2,3), Y(5,1), Z(3,-2) is reflected across the y-axis to triangle X'Y'Z'. Show that the triangles are congruent and describe the transformation.
Definition:

Reflection: A rigid transformation that creates a mirror image of a figure across a line called the line of reflection. For reflection across y-axis: (x,y) → (-x, y).

Original Points
X(2,3), Y(5,1), Z(3,-2)
Reflection Rule
(x,y) → (-x, y)
New Coordinates
X'(-2, 3), Y'(-5, 1), Z'(-3, -2)
Step 1: Apply reflection formula to each vertex

For reflection across y-axis: (x,y) → (-x, y)

X(2,3) → X'(-2, 3)

Y(5,1) → Y'(-5, 1)

Z(3,-2) → Z'(-3, -2)

Step 2: Verify reflection properties

Distance from y-axis: |2| = |-2| = 2 ✓, |5| = |-5| = 5 ✓, |3| = |-3| = 3 ✓

y-coordinates remain unchanged ✓

Step 3: Confirm congruence

Since reflection is a rigid transformation, triangles XYZ and X'Y'Z' are congruent

All side lengths and angle measures are preserved

Triangles are congruent via reflection
Final answer:

Triangles XYZ and X'Y'Z' are congruent because reflection is a rigid transformation that preserves size and shape. The transformation rule is (x,y) → (-x, y).

Applied rules:

• Reflection Formula: Across y-axis: (x,y)→(-x,y)

• Rigid Transformation: Preserves distances and angles

• Congruence: Figures related by rigid transformation are congruent

Rules and methods, laws,...
Translation: (x,y) → (x+h, y+k)
Translation Rule
Rotation 90°CCW
(x,y) → (-y, x)
Counterclockwise rotation
Rotation 180°
(x,y) → (-x, -y)
Half-turn rotation
Reflection Across Y-Axis
(x,y) → (-x, y)
Mirror across vertical line
Key definitions:

Congruent Figures: Figures that have the same size and shape

Similar Figures: Figures that have the same shape but not necessarily the same size

Rigid Transformation: A transformation that preserves distance and angle measure (translation, rotation, reflection)

Non-Rigid Transformation: A transformation that changes size (dilation)

Scale Factor: The ratio of corresponding lengths in similar figures

Congruence and Similarity methodology:
  1. Identify transformation type: Determine if rigid (congruence) or non-rigid (similarity)
  2. Apply transformation: Use appropriate coordinate rules
  3. Verify properties: Check if distances are preserved (congruence) or proportional (similarity)
  4. Conclude relationship: State whether figures are congruent or similar
Tip 1: Rigid transformations always create congruent figures.
Tip 2: Dilations create similar figures but not congruent ones.
Tip 3: Congruent figures have equal corresponding side lengths and angle measures.
Common errors: Confusing congruence with similarity, forgetting to verify properties after transformation.
Key properties preserved by rigid transformations: Side lengths, angle measures, area, perimeter, parallelism, collinearity.
Formulas to know by heart:

• Rigid transformations create congruent figures

• Dilations create similar figures

• Congruent: Same size and shape

• Similar: Same shape, proportional size

• Scale factor k: Corresponding lengths in ratio k:1

Solution: Exercises 4 to 5
4 Similarity via Dilation
Exercise 4
Triangle ABC has vertices A(2,4), B(6,2), C(4,8). Triangle A'B'C' has vertices A'(1,2), B'(3,1), C'(2,4). Show that the triangles are similar and find the scale factor.
Definition:

Similarity: Two figures are similar if their corresponding angles are equal and their corresponding sides are proportional. A dilation with scale factor k creates similar figures.

Original Points
A(2,4), B(6,2), C(4,8)
Scale Factor
k = 1/2
Image Points
A'(1,2), B'(3,1), C'(2,4)
Step 1: Compare corresponding coordinates

A(2,4) → A'(1,2): Both coordinates halved

B(6,2) → B'(3,1): Both coordinates halved

C(4,8) → C'(2,4): Both coordinates halved

Step 2: Calculate scale factor

Each coordinate is multiplied by 1/2

Scale factor k = 1/2

Step 3: Verify similarity properties

Angle measures remain the same

Side lengths are proportional with ratio 1:2

AB:A'B' = BC:B'C' = CA:C'A' = 2:1

Triangles are similar via dilation
Final answer:

Triangles ABC and A'B'C' are similar because there exists a dilation with scale factor 1/2 that maps ABC to A'B'C'. The transformation rule is (x,y) → (1/2x, 1/2y).

Applied rules:

• Dilation Rule: (x,y) → (kx, ky) for scale factor k

• Similarity: Proportional corresponding sides and equal angles

• Scale Factor: Ratio of corresponding lengths

5 Mixed Congruence and Similarity
Exercise 5
Rectangle PQRS with vertices P(1,1), Q(4,1), R(4,3), S(1,3) is first translated 2 units right and 3 units up, then dilated by scale factor 2. Determine if the final rectangle is congruent or similar to the original.
Definition:

Combined Transformations: When rigid and non-rigid transformations are applied together, the final result depends on the last transformation. If dilation is involved, the result is similar but not congruent.

Original Rectangle
P(1,1), Q(4,1), R(4,3), S(1,3)
After Translation
P'(3,4), Q'(6,4), R'(6,6), S'(3,6)
After Dilation
P''(6,8), Q''(12,8), R''(12,12), S''(6,12)
Step 1: Apply translation (x,y) → (x+2, y+3)

P(1,1) → P'(3,4), Q(4,1) → Q'(6,4)

R(4,3) → R'(6,6), S(1,3) → S'(3,6)

Step 2: Apply dilation (x,y) → (2x, 2y)

P'(3,4) → P''(6,8), Q'(6,4) → Q''(12,8)

R'(6,6) → R''(12,12), S'(3,6) → S''(6,12)

Step 3: Determine relationship

Original rectangle has dimensions 3×2

Final rectangle has dimensions 6×4

Ratio of corresponding sides: 6/3 = 2, 4/2 = 2

Rectangles are similar but not congruent
Final answer:

The final rectangle is similar to the original but not congruent because the dilation with scale factor 2 changed the size while preserving the shape. The rectangles have the same angle measures but different side lengths in the ratio 2:1.

Applied rules:

• Combined Transformations: Last transformation determines relationship

• Similarity: Equal angles and proportional sides

• Scale Factor: Determines the ratio of similarity

Transformation Properties and Rules
(x,y) → (x+h, y+k)
Translation
Key definitions:

Congruent Figures: Figures that have the same size and shape (related by rigid transformations)

Similar Figures: Figures that have the same shape but not necessarily the same size (related by rigid transformations + dilation)

Rigid Transformation: A transformation that preserves distance and angle measure (translation, rotation, reflection)

Non-Rigid Transformation: A transformation that changes size (dilation)

Scale Factor: The ratio of corresponding lengths in similar figures

Congruence and Similarity methodology:
  1. Identify transformation type: Determine if rigid (congruence) or non-rigid (similarity)
  2. Apply transformation: Use appropriate coordinate rules
  3. Verify properties: Check if distances are preserved (congruence) or proportional (similarity)
  4. Conclude relationship: State whether figures are congruent or similar
Tip 1: Rigid transformations always create congruent figures.
Tip 2: Dilations create similar figures but not congruent ones.
Tip 3: Congruent figures have equal corresponding side lengths and angle measures.
Tip 4: Similar figures have equal corresponding angles and proportional corresponding sides.
Properties preserved by rigid transformations: Side lengths, angle measures, area, perimeter, parallelism, collinearity.
Properties preserved by similarity transformations: Angle measures, parallelism, collinearity (but not side lengths or area).
Formulas to know by heart:

• Rigid transformations create congruent figures

• Dilations create similar figures

• Congruent: Same size and shape

• Similar: Same shape, proportional size

• Scale factor k: Corresponding lengths in ratio k:1

• Area ratio for similar figures: k²

• Perimeter ratio for similar figures: k

Comprehensive Summary: Congruence and Similarity from Transformations

Key Concepts and Definitions
  • Congruent Figures: Two figures are congruent if they have the same size and shape. One can be mapped to the other by a sequence of rigid transformations.
  • Similar Figures: Two figures are similar if they have the same shape but not necessarily the same size. Corresponding angles are equal and corresponding sides are proportional.
  • Rigid Transformation: A transformation that preserves distance and angle measure (translation, rotation, reflection). Creates congruent figures.
  • Non-Rigid Transformation: A transformation that changes size (dilation). Creates similar figures.
  • Scale Factor: The ratio of corresponding lengths in similar figures. If k > 1, figure gets larger; if 0 < k < 1, figure gets smaller.
Core Rules and Principles
  • Congruence Rule: Figures related by rigid transformations (translation, rotation, reflection) are congruent.
  • Similarity Rule: Figures related by rigid transformations + dilation are similar.
  • Preservation Rule: Rigid transformations preserve all measurements (lengths, angles, areas, perimeters).
  • Proportionality Rule: Similar figures have proportional corresponding sides and equal corresponding angles.
  • Scale Factor Rule: If scale factor is k, then lengths scale by k, areas by k², and volumes by k³.
Step-by-Step Method for Determining Relationships
  1. Identify Transformation Type: Determine if rigid (translation, rotation, reflection) or non-rigid (dilation).
  2. Apply Transformation Rule: Use appropriate coordinate transformation formula.
  3. Compare Measurements: Check corresponding side lengths and angle measures.
  4. Calculate Ratios: For similarity, find the ratio of corresponding lengths.
  5. Determine Relationship: If all ratios are 1:1, figures are congruent. Otherwise, they are similar.
  6. Verify Properties: Confirm that congruent figures have equal measurements and similar figures have proportional measurements.
Concrete Examples
  • Congruent Example: Triangle with vertices (1,1), (3,1), (2,3) translated to (4,2), (6,2), (5,4). Both triangles are congruent with equal side lengths and angles.
  • Similar Example: Square with vertices (1,1), (3,1), (3,3), (1,3) dilated by scale factor 2 to (2,2), (6,2), (6,6), (2,6). Squares are similar with proportional sides (ratio 2:1) and equal angles (90°).
  • Advanced Example: Pentagon transformed by rotation then dilation: Result is similar but not congruent to original.
Tips, Tricks, and Common Pitfalls
  • Tip 1: Remember that rigid transformations (translations, rotations, reflections) always create congruent figures.
  • Tip 2: Any transformation involving dilation creates similar figures, not congruent ones.
  • Tip 3: To verify congruence, check that all corresponding side lengths and angles are equal.
  • Tip 4: To verify similarity, check that corresponding angles are equal and corresponding sides are proportional.
  • Pitfall 1: Don't confuse congruence with similarity - congruent figures are also similar, but not vice versa.
  • Pitfall 2: For similarity, make sure you're comparing corresponding sides correctly.
  • Pitfall 3: Remember that area scales by k² and perimeter by k for similar figures.
Key Notes for Memorization
  • Memory Aid: "Rigid = Congruent, Dilation = Similar"
  • Congruence Properties: Same size AND shape
  • Similarity Properties: Same shape, proportional size
  • Quick Check: If coordinates are multiplied by a factor, it's dilation (similarity). If only added/subtracted, it's rigid (congruence).
  • Scale Factor Effects: Lengths ×k, Areas ×k², Volumes ×k³
  • Transformation Hierarchy: Rigid transformations preserve everything; dilations preserve angles but change sizes.

Questions & Answers

Question: How can I tell if two figures are congruent or similar just by looking at their coordinates after a transformation?

Answer: Here's how to determine the relationship:

  • Congruent: Coordinates change only by adding/subtracting constants (translations) or swapping/multiplying by -1 (rotations/reflections). Example: (x,y) → (x+3, y-2).
  • Similar: Coordinates are multiplied by the same factor (dilation). Example: (x,y) → (2x, 2y) or (x,y) → (0.5x, 0.5y).

If there's multiplication by a factor other than 1 or -1, the figures are similar. If only addition/subtraction occurs, they are congruent.

Question: If I rotate a figure and then dilate it, are the original and final figures congruent or similar?

Answer: The original and final figures are similar but not congruent. Here's why:

  • The rotation preserves all measurements (creates a congruent figure)
  • The dilation changes the size (makes figures similar but not congruent)
  • The final result has the same shape but different size

Any transformation that includes dilation results in similar figures, regardless of other transformations applied.

Question: When figures are similar due to dilation, how do their areas compare?

Answer: When figures are similar due to dilation with scale factor k:

  • Linear measurements (lengths): Scale by factor k
  • Areas: Scale by factor k²
  • Volumes: Scale by factor k³

For example, if a square is dilated by scale factor 3, its side lengths increase by factor 3, but its area increases by factor 3² = 9.