Translation in Coordinate Plane: A rigid transformation that moves every point of a figure the same distance in the same direction. Translation rule: (x,y) → (x+h, y+k) where h is horizontal shift and k is vertical shift.
- Identify the translation vector (h, k)
- Add h to x-coordinate and k to y-coordinate of each vertex
- Plot the new points and connect them
- Verify the transformation is rigid
Move 3 units right (h=3) and 2 units down (k=-2), so (h,k) = (3,-2)
For each point (x,y), new point is (x+3, y-2)
A(2,3) → A'(2+3, 3-2) = A'(5,1)
B(4,1) → B'(4+3, 1-2) = B'(7,-1)
C(1,-1) → C'(1+3, -1-2) = C'(4,-3)
Distance between points remains the same (rigid transformation)
Angle measures remain unchanged
After translating 3 units right and 2 units down, the new triangle has vertices A'(5,1), B'(7,-1), C'(4,-3). The transformation rule is (x,y) → (x+3, y-2).
• Translation Rule: (x,y) → (x+h, y+k)
• Rigid Transformation: Preserves distances and angles
• Coordinate Addition: Add translation vector to each coordinate
Rotation in Coordinate Plane: A rigid transformation that turns a figure around a fixed point called the center of rotation. For 90° counterclockwise rotation about origin: (x,y) → (-y, x)
Center: Origin (0,0), Angle: 90° counterclockwise
For 90° CCW rotation about origin: (x,y) → (-y, x)
P(3,4) → P'(-4, 3)
Distance from origin: √(3² + 4²) = √25 = 5
New distance: √((-4)² + 3²) = √25 = 5 ✓
After rotating P(3,4) 90° counterclockwise about the origin, P'(-4, 3). The transformation rule is (x,y) → (-y, x).
• Rotation Formulas: 90°CCW: (x,y)→(-y,x), 180°: (x,y)→(-x,-y), 270°CCW: (x,y)→(y,-x)
• Rigid Transformation: Distance from center preserved
• Angle Preservation: Shape and size remain unchanged
Reflection in Coordinate Plane: A rigid transformation that creates a mirror image of a figure across a line called the line of reflection. For reflection across y-axis: (x,y) → (-x, y)
Line of reflection is the y-axis (x = 0)
For reflection across y-axis: (x,y) → (-x, y)
X(2,3) → X'(-2, 3)
Y(5,1) → Y'(-5, 1)
Z(3,-2) → Z'(-3, -2)
Distance from y-axis: |2| = |-2| = 2 ✓, |5| = |-5| = 5 ✓, |3| = |-3| = 3 ✓
y-coordinates remain unchanged ✓
After reflecting triangle XYZ across the y-axis, X'(-2, 3), Y'(-5, 1), Z'(-3, -2). The transformation rule is (x,y) → (-x, y).
• Reflection Formulas: Across y-axis: (x,y)→(-x,y), Across x-axis: (x,y)→(x,-y)
• Rigid Transformation: Preserves distances and angles
• Equidistant Property: Original and reflected points equidistant from line of reflection
Rigid Transformation: A transformation that preserves distance and angle measure (also called isometry)
Translation: Sliding a figure without turning or flipping
Rotation: Turning a figure around a fixed point
Reflection: Flipping a figure over a line
Dilation: Changing the size of a figure by a scale factor
- Identify transformation type: Determine if translation, rotation, reflection, or dilation
- Find transformation parameters: Vector for translation, angle/center for rotation, line for reflection, scale factor for dilation
- Apply the rule: Use the appropriate coordinate transformation rule
- Verify properties: Check that distances and angles are preserved (for rigid transformations)
• Translation: (x,y) → (x+h, y+k)
• 90°CCW rotation: (x,y) → (-y, x)
• 180° rotation: (x,y) → (-x, -y)
• 270°CCW rotation: (x,y) → (y, -x)
• Reflection across y-axis: (x,y) → (-x, y)
• Reflection across x-axis: (x,y) → (x, -y)
• Dilation: (x,y) → (kx, ky)
Dilation in Coordinate Plane: A transformation that changes the size of a figure by a scale factor k from a center point. Rule: (x,y) → (kx, ky) when center is origin.
For dilation with scale factor k = 1/2: (x,y) → (kx, ky)
D(2,4) → D'(1/2×2, 1/2×4) = D'(1,2)
E(6,2) → E'(1/2×6, 1/2×2) = E'(3,1)
F(4,8) → F'(1/2×4, 1/2×8) = F'(2,4)
All distances from origin are halved
Side lengths reduced by factor of 1/2
Angle measures remain the same
Shape is similar but smaller
After dilating triangle DEF by scale factor 1/2 with center at origin, D'(1,2), E'(3,1), F'(2,4). The transformation rule is (x,y) → (1/2x, 1/2y).
• Dilation Rule: (x,y) → (kx, ky) for scale factor k
• Proportional Change: All coordinates scaled by same factor
• Similarity: Shape preserved, size changed proportionally
Combined Transformations: Applying multiple transformations sequentially. Order matters: perform transformations from first to last.
Translation 3 units right, 4 units up: (x,y) → (x+3, y+4)
G(1,2) → G'(1+3, 2+4) = G'(4,6)
Reflection across x-axis: (x,y) → (x, -y)
G'(4,6) → G''(4, -6)
Combined transformation: (x,y) → (x+3, -(y+4)) = (x+3, -y-4)
After translation 3 units right and 4 units up followed by reflection across x-axis, G''(4,-6). The complete transformation is (x,y) → (x+3, -y-4).
• Order Matters: Apply transformations in sequence given
• Sequential Application: Output of first becomes input of next
• Combined Rule: Compose individual transformation rules
Rigid Transformation: A transformation that preserves distance and angle measure (isometry)
Translation: Moving every point of a figure the same distance in the same direction
Rotation: Turning a figure around a fixed point by a specific angle
Reflection: Creating a mirror image of a figure across a line
Dilation: Changing the size of a figure by a scale factor
- Identify transformation type: Determine if translation, rotation, reflection, or dilation
- Find transformation parameters: Vector for translation, angle/center for rotation, line for reflection, scale factor for dilation
- Apply the rule: Use the appropriate coordinate transformation rule
- Verify properties: Check that distances and angles are preserved (for rigid transformations)
• Translation: (x,y) → (x+h, y+k)
• 90°CCW rotation: (x,y) → (-y, x)
• 180° rotation: (x,y) → (-x, -y)
• 270°CCW rotation: (x,y) → (y, -x)
• Reflection across y-axis: (x,y) → (-x, y)
• Reflection across x-axis: (x,y) → (x, -y)
• Dilation: (x,y) → (kx, ky)
Comprehensive Summary: Transformations in the Coordinate Plane
- Coordinate Plane: A 2-dimensional plane defined by x and y axes intersecting at origin (0,0)
- Transformation: A change in the position, size, or shape of a geometric figure
- Pre-image: The original figure before transformation (usually labeled with regular letters)
- Image: The resulting figure after transformation (usually labeled with prime symbols)
- Rigid Transformation (Isometry): A transformation that preserves distance and angle measure
- Non-Rigid Transformation: A transformation that changes the size of the figure (like dilation)
- Rigid Transformations Preserve: Side lengths, angle measures, area, parallelism, collinearity
- Translation Rule: Every point moves the same distance in the same direction
- Rotation Rule: Every point rotates around a fixed center by the same angle
- Reflection Rule: Every point reflects across a line maintaining equal distance from the line
- Dilation Rule: Every point moves away from or toward center by scale factor k
- Coordinate Plane Rules: Positive x is right, negative x is left, positive y is up, negative y is down
- Identify: Determine the type of transformation needed
- Find Parameters: Identify vector (translation), angle/center (rotation), line (reflection), or scale factor (dilation)
- Apply Rule: Use the appropriate coordinate transformation rule
- Transform Each Point: Apply the rule to every vertex of the figure
- Verify: Check that properties are preserved (for rigid transformations)
- Graph: Plot the new points to visualize the transformation
- Simple Translation: (2,3) → (5,7) means move 3 right, 4 up: (x,y) → (x+3, y+4)
- Simple Rotation: (3,4) → (-4,3) is 90°CCW rotation: (x,y) → (-y, x)
- Simple Reflection: (2,5) → (2,-5) is reflection across x-axis: (x,y) → (x, -y)
- Simple Dilation: (2,4) → (4,8) is dilation by factor 2: (x,y) → (2x, 2y)
- Advanced Example: Triangle with vertices (1,1), (3,1), (2,3) translated by (-2, 3) becomes (−1,4), (1,4), (0,6)
- Tip 1: For translations, apply the same change to all x-coordinates and all y-coordinates
- Tip 2: For rotations, always verify that distance from center remains constant
- Tip 3: For reflections, only one coordinate changes sign consistently
- Tip 4: For dilations, multiply coordinates by the scale factor
- Pitfall 1: Don't confuse clockwise vs counterclockwise rotations
- Pitfall 2: Remember that dilations are NOT rigid transformations
- Pitfall 3: Always apply transformations to all points of the figure
- Pitfall 4: Be careful with negative signs in coordinate calculations
- Translations: Add/subtract constants to coordinates
- Rotations about origin: 90°CCW: (x,y)→(-y,x), 180°: (x,y)→(-x,-y)
- Reflections: One coordinate changes sign, other stays same
- Dilations: Multiply coordinates by scale factor
- Memory Aid: Rigid transformations preserve everything except position/orientation
- Quick Check: Measure distances between points before and after transformation
Questions & Answers
Question: How do I know if a transformation is rigid or non-rigid just by looking at the coordinate rule?
Answer: Here's how to identify the type of transformation:
- Rigid transformations: Only involve adding/subtracting constants to coordinates (translations) or swapping/multiplying by -1 (rotations/reflections). Example: (x,y) → (x+3, y-2) is rigid.
- Non-rigid transformations: Involve multiplying coordinates by a factor other than 1 or -1 (dilations). Example: (x,y) → (2x, 2y) is non-rigid.
If coordinates are scaled by a factor (like 2x, 3y), it's non-rigid. If only addition/subtraction occurs, it's rigid.
Question: How do I remember the rotation rules for 90°, 180°, and 270°? They seem so confusing!
Answer: Here are some memory tricks for rotation rules about the origin:
- 90° CCW: (x,y) → (-y, x) → "Switch coordinates, negate the old y"
- 180°: (x,y) → (-x, -y) → "Negate both coordinates (like reflecting twice)"
- 270° CCW: (x,y) → (y, -x) → "Switch coordinates, negate the old x"
Alternative memory aid: 90° CCW is like taking (x,y) and rotating it one-quarter turn counterclockwise. Think of it as the x and y switching places with appropriate sign changes to maintain the rotation direction.
Practice with a few points like (1,0) and (0,1) to see how they rotate!
Question: When dilating a figure, does it always get larger? Can a figure get smaller?
Answer: A figure can get either larger or smaller depending on the scale factor:
- If scale factor > 1: Figure gets larger (enlargement)
- If 0 < scale factor < 1: Figure gets smaller (reduction)
- If scale factor = 1: Figure stays the same size
- If scale factor < 0: Figure is reflected and scaled
For example, a scale factor of 2 makes the figure twice as large, while a scale factor of 1/2 makes it half as large. Both are still dilations!