Function: A relation where each input (x-value) has exactly one output (y-value). The input is the independent variable, and the output is the dependent variable.
- To find output: substitute the input value into the function
- To find input: set the function equal to the output and solve for x
- Always verify your results by substituting back
f(x) = 2x + 3
f(4) = 2(4) + 3
f(4) = 8 + 3
f(4) = 11
Set f(x) = 11
2x + 3 = 11
2x = 11 - 3
2x = 8
x = 4
When x = 4: f(4) = 2(4) + 3 = 8 + 3 = 11 ✓
When f(x) = 11: x = 4 gives f(4) = 11 ✓
The input 4 corresponds to the output 11, and vice versa. This demonstrates the one-to-one correspondence in this linear function.
When f(x) = 11, x = 4
For f(x) = 2x + 3: when x = 4, f(x) = 11; when f(x) = 11, x = 4.
• Function evaluation: Substitute the input value for x in the function
• Inverse process: Solve the equation for x when output is known
• Verification: Always check results by substituting back into original function
Function table: A table showing input values (x) and their corresponding output values (f(x)). Each input must have exactly one output for the relation to be a function.
For x = -2: g(-2) = (-2)² - 2(-2) + 1 = 4 + 4 + 1 = 9
For x = -1: g(-1) = (-1)² - 2(-1) + 1 = 1 + 2 + 1 = 4
For x = 0: g(0) = (0)² - 2(0) + 1 = 0 - 0 + 1 = 1
For x = 1: g(1) = (1)² - 2(1) + 1 = 1 - 2 + 1 = 0
For x = 2: g(2) = (2)² - 2(2) + 1 = 4 - 4 + 1 = 1
For x = 3: g(3) = (3)² - 2(3) + 1 = 9 - 6 + 1 = 4
| x | g(x) |
|---|---|
| -2 | 9 |
| -1 | 4 |
| 0 | 1 |
| 1 | 0 |
| 2 | 1 |
| 3 | 4 |
Each input value has exactly one output value:
-2 → 9, -1 → 4, 0 → 1, 1 → 0, 2 → 1, 3 → 4
No input appears twice with different outputs
Therefore, this relation IS a function
Notice that g(x) = x² - 2x + 1 = (x-1)², which is a perfect square trinomial. This function always produces a unique output for each input.
This relation is a function
The completed table shows each input has exactly one output, confirming this is a function.
• Function definition: Each input must have exactly one output
• Table completion: Substitute each x-value into the function to find g(x)
• Function test: Check that no input appears with multiple outputs
Vertical line test: A graph represents a function if and only if every vertical line intersects the graph at most once. This ensures each input has at most one output.
Choose x-values: 0, 1, 2, 4 (to get integer outputs)
For x = 0: h(0) = -0 + 4 = 4 → Point (0, 4)
For x = 1: h(1) = -1 + 4 = 3 → Point (1, 3)
For x = 2: h(2) = -2 + 4 = 2 → Point (2, 2)
For x = 4: h(4) = -4 + 4 = 0 → Point (4, 0)
Mark the points (0, 4), (1, 3), (2, 2), and (4, 0) on the coordinate plane
Draw a straight line through the points since h(x) = -x + 4 is a linear function
Draw vertical lines at various x-values. Each vertical line intersects the graph at exactly one point. Therefore, the graph represents a function.
h(x) = -x + 4 is a function
The graph of h(x) = -x + 4 passes the vertical line test, confirming it is a function.
• Vertical line test: Each vertical line intersects the graph at most once
• Linear function: Forms a straight line when graphed
• Function property: Each x-value maps to exactly one y-value
Function: A relation where each element in the domain corresponds to exactly one element in the range.
Input (Domain): The independent variable (usually x) that is fed into the function.
Output (Range): The dependent variable (usually y or f(x)) that results from processing the input.
Function notation: f(x) read as "f of x" represents the output when x is the input.
Vertical line test: A visual test to determine if a graph represents a function.
- Examine the relation: Check if each input has exactly one output
- For tables: Verify no x-value appears twice with different y-values
- For graphs: Apply the vertical line test
- For equations: Ensure each x produces exactly one y
- For mappings: Check that each input maps to only one output
• Function definition: Each input has exactly one output
• Vertical line test: Graph is a function if every vertical line intersects at most once
• Function notation: f(x) means "the output of function f when the input is x"
• Domain: Set of all possible input values
• Range: Set of all possible output values
Relation: A set of ordered pairs (x, y). A function is a special type of relation where each x-value appears only once.
Relation A: {(1,2), (2,3), (3,4), (4,5)}
Input values: 1, 2, 3, 4 (all different)
Each input appears exactly once
Each input maps to exactly one output
Therefore, Relation A IS a function
Relation B: {(1,2), (1,3), (2,4), (3,5)}
Input values: 1, 1, 2, 3 (input 1 appears twice)
Input 1 maps to both output 2 and output 3
This violates the function definition
Therefore, Relation B is NOT a function
Relation C: {(2,1), (3,1), (4,1), (5,1)}
Input values: 2, 3, 4, 5 (all different)
Each input appears exactly once
All inputs map to the same output (1)
Each input still has exactly one output
Therefore, Relation C IS a function (constant function)
Function requires: Each input → Exactly one output
A: ✓ Each input appears once → Function
B: ✗ Input 1 appears twice → Not a function
C: ✓ Each input appears once → Function
B: Not a function ✗
C: Function ✓
Relation A and C are functions; Relation B is not a function.
• Function definition: Each input must have exactly one output
• Input uniqueness: In a function, no x-value can appear with different y-values
• Constant function: Multiple inputs can have the same output in a function
One-to-one function: A function where each output corresponds to exactly one input. No two different inputs map to the same output.
The domain is the set of all input values.
Given function f maps {1, 2, 3, 4}
Domain = {1, 2, 3, 4}
The range is the set of all output values.
f(1) = a, f(2) = b, f(3) = c, f(4) = a
Output values are: a, b, c, a
Distinct output values: a, b, c
Range = {a, b, c}
A function is one-to-one if each output corresponds to exactly one input.
f(1) = a and f(4) = a
Two different inputs (1 and 4) map to the same output (a)
Therefore, f is NOT one-to-one
f(2) = b (given directly)
To find f⁻¹(b): What input maps to output b?
Since f(2) = b, then f⁻¹(b) = 2
Check that each input has exactly one output:
1 → a ✓, 2 → b ✓, 3 → c ✓, 4 → a ✓
Each input maps to exactly one output → f is a function
Range: {a, b, c}
f is not one-to-one
f(2) = b, f⁻¹(b) = 2
Domain = {1, 2, 3, 4}, Range = {a, b, c}, f is not one-to-one, f(2) = b, f⁻¹(b) = 2.
• Domain: Set of all possible input values
• Range: Set of all possible output values
• One-to-one: Different inputs must map to different outputs
• Inverse function: f⁻¹(y) = x means f(x) = y
Function: A special type of relation where each element in the domain (input set) is paired with exactly one element in the range (output set).
Domain: The set of all possible input values for which the function is defined.
Range: The set of all possible output values that the function can produce.
Function notation: f(x) represents the output of function f when the input is x.
Vertical line test: A graphical method to determine if a curve represents a function.
One-to-one function: A function where each output value corresponds to exactly one input value.
Onto function: A function where every element in the codomain is mapped to by at least one element in the domain.
Bijection: A function that is both one-to-one and onto.
- Identify domain: Determine all possible input values
- Find range: Determine all possible output values
- Verify function property: Check that each input has exactly one output
- Evaluate function: Calculate outputs for given inputs
- Find inverse (if exists): Determine input for given outputs
- Classify function type: Determine if one-to-one, onto, etc.
- Graph representation: Visualize the function relationship
• Function definition: ∀x₁, x₂ ∈ Domain: x₁ = x₂ ⇒ f(x₁) = f(x₂)
• One-to-one: ∀x₁, x₂ ∈ Domain: f(x₁) = f(x₂) ⇒ x₁ = x₂
• Onto: ∀y ∈ Range, ∃x ∈ Domain such that f(x) = y
• Composition: (f ∘ g)(x) = f(g(x))
• Inverse: f⁻¹(f(x)) = x and f(f⁻¹(y)) = y
• Domain restrictions: Division by zero, even roots of negative numbers, logarithms of non-positive numbers